What axe are you playing for your Easter gig?

Post Reply
hyperbolica
Posts: 3158
Joined: Fri Mar 23, 2018 7:31 am

What axe are you playing for your Easter gig?

Post by hyperbolica »

I'm playing my 88h with a 0.525" slide. Playing with a brass quintet behind a choir with an organ. I feel like I'm getting a nice clear sound and fitting in to the overall sound, maybe a little on the bright side. With the choir, I have to hold back but with the organ, sometimes you have to crank.

So what are you playing and with whom?
User avatar
BGuttman
Posts: 6295
Joined: Thu Mar 22, 2018 7:19 am
Location: Cow Hampshire

Re: What axe are you playing for your Easter gig?

Post by BGuttman »

First year in a long time for me. I'm playing the bottom voice in a 2+2 quartet (2 trumpets, 2 trombones) and was asked to play bass. So it's my King 7B to the rescue.
Bruce Guttman
Merrimack Valley Philharmonic Orchestra
"Almost Professional"
User avatar
Neo Bri
Posts: 1313
Joined: Wed Mar 21, 2018 10:30 am
Location: Netherwhere
Contact:

Re: What axe are you playing for your Easter gig?

Post by Neo Bri »

I'm playing my Thein Universal Tenor II with the screw bell, and a partridge in a pear treeeeeee.

Very few Easter gigs in the place I live.
User avatar
Matt K
Verified
Posts: 4240
Joined: Tue Mar 20, 2018 10:34 pm
Contact:

Re: What axe are you playing for your Easter gig?

Post by Matt K »

Just got the music today. Looks like I'll be using my Shires large bore. It's standard brass 5tet stuff. I tend to bring that as my default and go smaller or larger if I know the group more.
User avatar
KRRath
Posts: 11
Joined: Fri Mar 23, 2018 10:07 am
Location: South Dakota

Re: What axe are you playing for your Easter gig?

Post by KRRath »

Our brass quintet will be playing at two churches where I'll be using my Edwards T-350e (my primary bone).
Kevin R.
User avatar
boomski
Posts: 19
Joined: Fri Mar 23, 2018 5:19 am
Location: Michigan

Re: What axe are you playing for your Easter gig?

Post by boomski »

Playing with my quintet for the prelude, and then we were invited to join the other brass players at the church for the remainder of the service. I think there will be something like 4 trumpets, 3 trombones, french horn, tuba, maybe more... so it should be pretty fun. I'll be playing my 42T.
User avatar
TriJim
Posts: 63
Joined: Sun Mar 25, 2018 3:42 pm
Location: SouthCentral Pennsylvania

Re: What axe are you playing for your Easter gig?

Post by TriJim »

Bach A47MLR - 2d trombone in a 2 trumpet/2 trombone quartet. Five hymns with the church organ, and an arrangement with bell choir and church choir. Only rehearsal will be one hour before first of two services.

Happy Easter All!
DDoghouse
Posts: 63
Joined: Sat Mar 24, 2018 7:59 am

Re: What axe are you playing for your Easter gig?

Post by DDoghouse »

Playing bottom voice in a quartet with two trumpets and a horn. Playing my newly acquired TR180, and enjoying it.
Doghouse Dan
I'm warning you - I have a trombone and I'm not afraid to use it!
AlexMcMahon
Posts: 34
Joined: Fri Mar 23, 2018 4:39 am

Re: What axe are you playing for your Easter gig?

Post by AlexMcMahon »

I'm playing a Bach 36B, modified with an Edwards rotary valve section and 42 tenon/receiver. It's my go-to teaching and gigging horn when I don't want to risk damaging my fancy gear around a crowd Im not familiar with.

Group is 2 bones, 2 trumpets with the choir and I'm playing 1st bone. 1 hymn, 1 anthem and an arranged Hallelujah Chorus.
User avatar
Finetales
Posts: 1060
Joined: Fri Mar 23, 2018 12:31 pm
Location: Los Angeles
Contact:

Re: What axe are you playing for your Easter gig?

Post by Finetales »

My indy-valved 72H. Standard 2 trumpet/2 trombone quartet.
User avatar
dukesboneman
Posts: 715
Joined: Mon Apr 02, 2018 4:40 pm
Location: Sarasota, Florida
Contact:

Re: What axe are you playing for your Easter gig?

Post by dukesboneman »

I was supposed to play Bass Trombone on the 2 services (Yamaha 321) but at the last minute it was changed to Tuba
(1928 Conn Eb with a Miraphone Eb mouthpiece)
Posaunus
Posts: 3888
Joined: Fri Mar 23, 2018 9:54 pm
Location: California

Re: What axe are you playing for your Easter gig?

Post by Posaunus »

My assignment:
• Accompany the choir on Introit, Anthem, & Benediction (w/ organ, no other brass)
• Solo trombone & piano for "Special Music"

I started out with a large bore tenor (Olds O-25), but it was too much for the small church and choir.

Then tried a King 3B - I love it, but the sound was a bit too thin for the occasion.

Ended up playing my recently-acquired Conn 79H (0.522" bore) - it was just perfect. :good:
I may have to name this trombone "Goldilocks!" :wink:
hyperbolica
Posts: 3158
Joined: Fri Mar 23, 2018 7:31 am

Re: What axe are you playing for your Easter gig?

Post by hyperbolica »

Posaunus wrote: Mon Apr 02, 2018 11:09 pm Ended up playing my recently-acquired Conn 79H (0.522" bore) - it was just perfect. :good:
I may have to name this trombone "Goldilocks!" :wink:
There are a couple 79h fans here. I'm one of them. I probably should have played my 79h, but I played my 88h w/ 525 slide instead - gives more power, and we had a big organ to contend with. I love the 79h. Great overall instrument.
User avatar
Tarkus697
Posts: 78
Joined: Tue Apr 03, 2018 7:39 pm
Location: Philadelphia, PA
Contact:

Re: What axe are you playing for your Easter gig?

Post by Tarkus697 »

I used my circa 1989 Bach 36BO with a Schilke 50. Two trombones (the other guy had a 36BO as well) and two trumpets, plus organ and choir. Entrance piece, 4 hymns, exit piece.
------------------------------------------
Alan W. Verostick
Strangers
Philadelphia Freedom Band
Love City Horns
User avatar
matto
Posts: 18
Joined: Fri Mar 23, 2018 9:14 am
Location: Metro Atlanta

Re: What axe are you playing for your Easter gig?

Post by matto »

Easter is over, but I'll put in my $.02 to get my perfunctory approval posts in place...

Shires .525 with dual bore rotor, 7YLW bell. Was playing second, so used the large bore leadpipe with my trusty DE 101XTG8.
User avatar
Neo Bri
Posts: 1313
Joined: Wed Mar 21, 2018 10:30 am
Location: Netherwhere
Contact:

Re: What axe are you playing for your Easter gig?

Post by Neo Bri »

matto wrote: Wed Apr 04, 2018 6:55 am Easter is over, but I'll put in my $.02 to get my perfunctory approval posts in place...

Shires .525 with dual bore rotor, 7YLW bell. Was playing second, so used the large bore leadpipe with my trusty DE 101XTG8.
Sounds like a nice horn. I haven't heard much feedback about the dual-bore rotors. Thoughts?
User avatar
matto
Posts: 18
Joined: Fri Mar 23, 2018 9:14 am
Location: Metro Atlanta

Re: What axe are you playing for your Easter gig?

Post by matto »

The dual bore rotor is very focused, but I don't want to imply that it is stuffy, because it certainly isn't. It really keeps the focus of the tenor sound throughout the range without getting a wide, broad sound like a Thayer valve can have. Works well for me playing solo literature, or transcriptions that go below the staff and don't require brute force, but for loud orchestral 2nd parts it can be harder to dial in. If I were spending significant amounts of time in that register and that style, I would likely want a Thayer.
User avatar
tbathras
Posts: 126
Joined: Fri Mar 23, 2018 6:58 am
Location: Southern Maine

Re: What axe are you playing for your Easter gig?

Post by tbathras »

A friend of mine who plays 1st has the dual-bore rotor on his Shires large tenor. He didn't say exactly why other than that it really meshed well with him, and he's got a huge sound, so it certainly doesn't "constrict" anything even though it looks smaller from the outside than the regular rotor.
--
Bass Trombone
Casco Bay Wind Symphony
User avatar
Neo Bri
Posts: 1313
Joined: Wed Mar 21, 2018 10:30 am
Location: Netherwhere
Contact:

Re: What axe are you playing for your Easter gig?

Post by Neo Bri »

Good to know. I'd like to try one. To me, it's the most interesting product Shires makes.
fwbassbone
Posts: 131
Joined: Sat Apr 07, 2018 9:59 am

Re: What axe are you playing for your Easter gig?

Post by fwbassbone »

Shires Bass in a 2+2 quartet. It was a great gig.
RichC
Posts: 141
Joined: Fri Mar 23, 2018 2:36 pm
Location: Just South of Philly, PA USA

Re: What axe are you playing for your Easter gig?

Post by RichC »

Edwards 502D - 2 trumpets/2 bones
Post Reply

Return to “Instruments”