Cut Bell Conversion Question

Post Reply
User avatar
dukesboneman
Posts: 715
Joined: Mon Apr 02, 2018 4:40 pm
Location: Sarasota, Florida
Contact:

Cut Bell Conversion Question

Post by dukesboneman »

Does anyone know what the average cost of a Cut Bell/Screw Bell Conversion is ?
hornbuilder
Posts: 1015
Joined: Wed May 02, 2018 9:20 pm

Re: Cut Bell Conversion Question

Post by hornbuilder »

That depends.
Is the bell detachable from the gooseneck/valve section?
How much refinish work do you want?
Matthew Walker
Owner/Craftsman, M&W Custom Trombones, LLC, Jackson, Wisconsin.
Former Bass Trombonist, Opera Australia, 1991-2006
mbarbier
Posts: 290
Joined: Thu May 17, 2018 9:58 pm

Re: Cut Bell Conversion Question

Post by mbarbier »

I think mine was $500 in 2017. Detachable bell horn, Shires parts. Done at the boneyard in LA.
trombone and composition faculty at CalArts
1/2 of RAGE Thormbones
they/them
https://mattiebarbier.bandcamp.com/
http://www.mattiebarbier.com/
User avatar
elmsandr
Posts: 1075
Joined: Fri Mar 23, 2018 2:43 pm
Location: S.E. Michigan
Contact:

Re: Cut Bell Conversion Question

Post by elmsandr »

Also.. how round is the stem/flare where you want to put the ring?

I have a Bach flare that I was going to cut… it is decidedly egg shape when you set the ring in place. Would need a bit of work to even get to mounting the ring. Looks perfect, just not round.

Cheers,
Andy
mbarbier
Posts: 290
Joined: Thu May 17, 2018 9:58 pm

Re: Cut Bell Conversion Question

Post by mbarbier »

elmsandr wrote: Wed Jun 21, 2023 4:57 am Also.. how round is the stem/flare where you want to put the ring?

I have a Bach flare that I was going to cut… it is decidedly egg shape when you set the ring in place. Would need a bit of work to even get to mounting the ring. Looks perfect, just not round.

Cheers,
Andy
When John (Sandhagen) did mine he had to round it out, but that was included in the labor. Said basically almost all bells need to get rounded out, so just includes it in the planned labor cost. Dunno if that's standard practice, but it only took him a few minutes to round it out.
trombone and composition faculty at CalArts
1/2 of RAGE Thormbones
they/them
https://mattiebarbier.bandcamp.com/
http://www.mattiebarbier.com/
User avatar
BigBadandBass
Posts: 250
Joined: Thu Feb 13, 2020 11:17 am
Location: Ohio

Re: Cut Bell Conversion Question

Post by BigBadandBass »

There’s an older thread on here somewhere that addresses this, I would say to factor in $1000 in the very least if you’re getting the work done and buying a brand new case
User avatar
Burgerbob
Posts: 5068
Joined: Mon Apr 23, 2018 8:10 pm
Location: LA
Contact:

Re: Cut Bell Conversion Question

Post by Burgerbob »

On average? $4373. But that's due to that one guy who got a bell cut for $15,000.
Aidan Ritchie, LA area player and teacher
aasavickas
Posts: 173
Joined: Thu Sep 13, 2018 12:16 am
Location: Detroit, MI

Re: Cut Bell Conversion Question

Post by aasavickas »

To convert a horn to a cut bell should be between about 300 - 800 make sure the tech has done it before.
User avatar
Matt K
Verified
Posts: 4240
Joined: Tue Mar 20, 2018 10:34 pm
Contact:

Re: Cut Bell Conversion Question

Post by Matt K »

Don’t the parts alone cost $300? I would expect the floor to be about $200 for a horn that is already modular (and therefore doesn’t need to be unsoldered and then reattached.
BoNeLife
Posts: 32
Joined: Mon Jan 30, 2023 10:05 pm

Re: Cut Bell Conversion Question

Post by BoNeLife »

I've cut a number of bells and generally keep with within the 300-400 range depending on how long it takes. Rings are around 130-150$ and need to be modified to fit the specific bell tapers
EZSlider
Posts: 155
Joined: Tue Apr 17, 2018 7:29 pm
Location: Central NY

Re: Cut Bell Conversion Question

Post by EZSlider »

Benn Hanson did my Bach 50A3 back in 19.. think it ran me 7 or 8.. Oh yeah that includes cutting to G valve and lacquer touch up. good guy good work.. think my MB case set me back close to the same.. Would be kinda hard to go back to normal. Sticking a 10in bass in the over head storage is pretty sweet.. as well as the looks from the TSA x-ray op when the put your "violin" case through lol
EZ
Post Reply

Return to “Modification & Repair”