King medium bore trombone

Post Reply
JanStortelder
Posts: 2
Joined: Mon Apr 22, 2024 1:02 pm

King medium bore trombone

Post by JanStortelder »

Hello, yesterday, I bought an old King Tenor trombone with serial number 31217 for the reasonable price of 60 euro’s (which is, as the trombone has some holes, an unloosenable tuning slide (in my bare hands, that is) and a lacquer of which I do not know if it is meant to be gold or silver). I can’t find any information on its bore, except for the slide, which says it is a medium bore.
Nowadays, this would mean it would have a .525 inch or 13.33 mm bore, but back then, bores were smaller, so I don’t think those rules apply.
Does anybody know what bore this trombone has?
User avatar
BGuttman
Posts: 6295
Joined: Thu Mar 22, 2018 7:19 am
Location: Cow Hampshire

Re: King medium bore trombone

Post by BGuttman »

If that serial number is right this is a VERY old trombone (>100 years old). Does it not have a slide lock or bell nut? If it does, the serial number is wrong. Also, a trombone with this serial would have a double brace (1 straight and 1 curved) under the mouthpiece.

100 years ago Medium Bore would be 12.7 mm or so (this is Conn's #3 bore).

You can get a rough idea of slide bore by measuring inside the stocking; especially if this is a 100 year old horn with soldered on stockings. If the stockings are drawn (i.e. made from the same piece of metal as the inner slide) then all bets are off for this measurement.
Bruce Guttman
Merrimack Valley Philharmonic Orchestra
"Almost Professional"
JanStortelder
Posts: 2
Joined: Mon Apr 22, 2024 1:02 pm

Re: King medium bore trombone

Post by JanStortelder »

Thank you very much for your fast reply!
I have measured the bore, it is a 12.7 mm bore.
I am also rather certain about that serial number, it is on all parts of the instrument and the trombone doesn’t have a slide lock or bell lock, though it doesn’t need any of that.
MitchellAcoustics
Posts: 1
Joined: Fri Oct 18, 2024 8:09 am

Re: King medium bore trombone

Post by MitchellAcoustics »

Based on the HN White serial numbers it is indeed from the 1910-1915 period: https://www.hnwhite.com/serialnumbers

With a medium bore I think this would make it either a King No. 2 or No. 3. The difference between these two being No. 2 has a 6.5in bell and the No. 3 has a 7in bell. I can't find an indication of the actual bore measurement in the catalogs of this period, but when they introduce the "Improved Proportion" versions in 1927, they specify medium bore as .461 in (11.7mm) and it doesn't look like they'd changed the bore size: https://www.saxophone.org/museum/publications/id/72 (pg. 18). They also had the "larger bore" .481in (Orchestra Trombone) and "large bore" .508in (Symphony Trombone). I have one of the utility versions from 1926, serial #94xxx! If it's like mine, the slide should also state whether it is low pitch or high pitch.

You can see the 1912 catalog for your instrument on page 6 here: https://www.saxophone.org/museum/publications/id/1072
Post Reply

Return to “History of the Trombone”