Rifling on Conn 3?
- paysonmcc
- Posts: 35
- Joined: Tue May 21, 2019 4:40 pm
- Location: ATX
Rifling on Conn 3?
I was going through some mouthpieces for students to use and found a Conn 3 in the pile. I checked to see if it was clean enough to play and found something really cool in the throat of the mouthpiece: rifling! Has anyone seen this on any other mouthpieces?
You do not have the required permissions to view the files attached to this post.
- ghmerrill
- Posts: 946
- Joined: Mon Apr 02, 2018 4:41 pm
- Location: Central North Carolina
Re: Rifling on Conn 3?
Brand Turbobore: https://www.mundstuecke.ch/en/
Gary Merrill
Amati Oval Euph
1924 Buescher 3-valve Eb tuba
Schiller American Heritage 7B clone bass trombone
M/K nickel MV50 leadpipe
DE LB K/K8/110 Lexan
1947 Olds "Standard" trombone (Bach 12c)
Amati Oval Euph
1924 Buescher 3-valve Eb tuba
Schiller American Heritage 7B clone bass trombone
M/K nickel MV50 leadpipe
DE LB K/K8/110 Lexan
1947 Olds "Standard" trombone (Bach 12c)
-
- Posts: 53
- Joined: Sat Apr 15, 2023 7:44 am
Re: Rifling on Conn 3?
Glenn Zottola mouthpieces hade riffled backbore. Some of us tried them in the 60s.
Yes that´s right JohnL, not riffled. stepped.
Yes that´s right JohnL, not riffled. stepped.
Last edited by Olofson on Sat Apr 13, 2024 3:49 am, edited 2 times in total.
- harrisonreed
- Posts: 5165
- Joined: Fri Aug 17, 2018 12:18 pm
- Location: Fort Riley, Kansas
- Contact:
Re: Rifling on Conn 3?
Best Brass also has mouthpieces like this.
- JohnL
- Posts: 1854
- Joined: Fri Mar 23, 2018 9:01 am
- Contact:
Re: Rifling on Conn 3?
That's a really tight twist.
https://patents.google.com/patent/US2798402A
Are those cut in a spiral? It looks more like they're simple circumferential grooves.
I thought Zottola used a stepped backbore. That's certainly what the patent says.
https://patents.google.com/patent/US2798402A
-
- Posts: 1444
- Joined: Tue Jan 14, 2020 10:52 am
Re: Rifling on Conn 3?
At one time, I had a lot of the Elkhart Conn mouthpieces. I don’t remember “rifling” marks like that in any of those. Perhaps someone made some aftermarket modifications with a reamer or a drill bit?
Brian D. Hinkley - Player, Teacher, Technician and Trombone Enthusiast
- BGuttman
- Posts: 6295
- Joined: Thu Mar 22, 2018 7:19 am
- Location: Cow Hampshire
Re: Rifling on Conn 3?
I'm certain it was aftermarket. My Conn 3 has no rifling in the aperture (or anywhere else on the piece).
Bruce Guttman
Merrimack Valley Philharmonic Orchestra
"Almost Professional"
Merrimack Valley Philharmonic Orchestra
"Almost Professional"
-
- Posts: 1610
- Joined: Tue Jul 02, 2019 9:06 am
- Location: New Jersey
- Contact:
Re: Rifling on Conn 3?
That really looks like a failed attempt at reaming out the throat. Maybe they used a cylindrical file?
David S. - daveyboy37 from TTF
Bach 39, LT36B, 42BOF & 42T, King 2103 / 3b, Kanstul 1570CR & 1588CR, Yamaha YBL-612 RII, YBL-822G & YBL-830, Sterling 1056GHS Euphonium,
Livingston Symphony Orchestra NJ - Trombone
Bach 39, LT36B, 42BOF & 42T, King 2103 / 3b, Kanstul 1570CR & 1588CR, Yamaha YBL-612 RII, YBL-822G & YBL-830, Sterling 1056GHS Euphonium,
Livingston Symphony Orchestra NJ - Trombone
- JohnL
- Posts: 1854
- Joined: Fri Mar 23, 2018 9:01 am
- Contact:
Re: Rifling on Conn 3?
I'm thinking maybe a tap?Crazy4Tbone86 wrote: ↑Fri Apr 12, 2024 4:29 pm At one time, I had a lot of the Elkhart Conn mouthpieces. I don’t remember “rifling” marks like that in any of those. Perhaps someone made some aftermarket modifications with a reamer or a drill bit?
-
- Posts: 1593
- Joined: Tue Mar 27, 2018 5:51 am
- Location: central Virginia
Re: Rifling on Conn 3?
Off topic a bit, but a tap and die set can be useful.
I just helped assemble a handicapped ramp for a neighbor who'd had surgery. It's an assortment of pieces to be used temporarily so gets moved fairly often. The crew ran a tap down every threaded hole and a die across every threaded piece before assembling. That avoided a lot of frustration over munged up or just dirty threads.
I just helped assemble a handicapped ramp for a neighbor who'd had surgery. It's an assortment of pieces to be used temporarily so gets moved fairly often. The crew ran a tap down every threaded hole and a die across every threaded piece before assembling. That avoided a lot of frustration over munged up or just dirty threads.
- paysonmcc
- Posts: 35
- Joined: Tue May 21, 2019 4:40 pm
- Location: ATX
Re: Rifling on Conn 3?
I was able to take a look at the throat in a little better light. The sliver plating is only missing in the throat, so it is definitely modified. To me it looks like the throat was first drilled out and then "tapped".
One thing that is hard to see from the picture is that the total length of these marks are about 0.5 inches long, and are very uniform. It really looks like an attempt to try a new modification, and not a slipped bit.
I'll plug it in my Bach 36 later and see how playable it is.
One thing that is hard to see from the picture is that the total length of these marks are about 0.5 inches long, and are very uniform. It really looks like an attempt to try a new modification, and not a slipped bit.
I'll plug it in my Bach 36 later and see how playable it is.
-
- Posts: 365
- Joined: Thu Mar 29, 2018 7:51 pm
- Location: Maryland
Re: Rifling on Conn 3?
Not threads.
Definitely rifling.
Done with a broach.
One out of hundreds of experimental trombone mouthpiece designs.
Curious to learn how it plays.
Definitely rifling.
Done with a broach.
One out of hundreds of experimental trombone mouthpiece designs.
Curious to learn how it plays.
- JohnL
- Posts: 1854
- Joined: Fri Mar 23, 2018 9:01 am
- Contact:
Re: Rifling on Conn 3?
Honestly, I don't think it was a thread tap or a rifling broach (at least not anything standard).
Consider:
If it's a thread, it's a very coarse pitch (I count five threads per 1/2").
If it's rifling, that's a lot of grooves (I count at least eight and we can't see them all) and a fast twist (the grooved section is about 1/2" long and the grooves go more than a quarter of the way around - that's a twist rate of 1 turn in less than 2").
Do the grooves extend all the way through the throat (i.e., can you see them at the very bottom of the cup)?
- harrisonreed
- Posts: 5165
- Joined: Fri Aug 17, 2018 12:18 pm
- Location: Fort Riley, Kansas
- Contact:
Re: Rifling on Conn 3?
It's not rifling. Those grooves are too deep (for that bore size) and the twist rate is too fast.
It's like cannon sized grooves on a .22 bore.
Also you can see the job wasn't done right near the backbore / throat mating point. The grooves skip, almost like they tried coming in from the other end.
It's like cannon sized grooves on a .22 bore.
Also you can see the job wasn't done right near the backbore / throat mating point. The grooves skip, almost like they tried coming in from the other end.