Wine glass shaped mouthpieces

Post Reply
User avatar
harrisonreed
Posts: 5165
Joined: Fri Aug 17, 2018 12:18 pm
Location: Fort Riley, Kansas
Contact:

Wine glass shaped mouthpieces

Post by harrisonreed »

I am looking through lots of scan data, and the LI Brass Co schematics available on their site and was wondering how common it is to design a mouthpiece where the rim might be narrower than the cup beneath it. Besides the LI Brass bass mouthpiece for tenor players who double, there are a couple other pieces that appear to expand wider inside the cup than the narrowest point on the rim, and some of the examples surprised me.

Is this a common thing that I just wasn't aware of? It seems like this practice would make the upper register extremely difficult to control.
LIBrassCo
Posts: 474
Joined: Sun Feb 24, 2019 5:34 am
Location: Long Island, NY
Contact:

Re: Wine glass shaped mouthpieces

Post by LIBrassCo »

harrisonreed wrote: Mon Mar 11, 2024 9:52 am I am looking through lots of scan data, and the LI Brass Co schematics available on their site and was wondering how common it is to design a mouthpiece where the rim might be narrower than the cup beneath it. Besides the LI Brass bass mouthpiece for tenor players who double, there are a couple other pieces that appear to expand wider inside the cup than the narrowest point on the rim, and some of the examples surprised me.

Is this a common thing that I just wasn't aware of? It seems like this practice would make the upper register extremely difficult to control.
Fwiw, none of our mouthpieces are wider past the rim.
Check out our new Pollard Sarastro line of mouthpieces: https://www.librassco.com/pollard-signature-series
User avatar
ithinknot
Posts: 1107
Joined: Fri Jul 24, 2020 3:40 pm

Re: Wine glass shaped mouthpieces

Post by ithinknot »

Not that rare, based on years of deeply scientific thumb probe data.
User avatar
muschem
Posts: 238
Joined: Sun Jan 17, 2021 10:16 am
Location: Austin, Texas
Contact:

Re: Wine glass shaped mouthpieces

Post by muschem »

LIBrassCo wrote: Mon Mar 11, 2024 10:36 am
harrisonreed wrote: Mon Mar 11, 2024 9:52 am I am looking through lots of scan data, and the LI Brass Co schematics available on their site and was wondering how common it is to design a mouthpiece where the rim might be narrower than the cup beneath it. Besides the LI Brass bass mouthpiece for tenor players who double, there are a couple other pieces that appear to expand wider inside the cup than the narrowest point on the rim, and some of the examples surprised me.

Is this a common thing that I just wasn't aware of? It seems like this practice would make the upper register extremely difficult to control.
Fwiw, none of our mouthpieces are wider past the rim.
That's very interesting. I only have one LI Brass Co bass piece to examine, but using my high-precision thumb check, I'd have guessed that it is in fact wider in the cup than at the rim. Perhaps it first narrows from the rim, and then expands back outward in the mid-cup?
User avatar
harrisonreed
Posts: 5165
Joined: Fri Aug 17, 2018 12:18 pm
Location: Fort Riley, Kansas
Contact:

Re: Wine glass shaped mouthpieces

Post by harrisonreed »

LIBrassCo wrote: Mon Mar 11, 2024 10:36 am
harrisonreed wrote: Mon Mar 11, 2024 9:52 am I am looking through lots of scan data, and the LI Brass Co schematics available on their site and was wondering how common it is to design a mouthpiece where the rim might be narrower than the cup beneath it. Besides the LI Brass bass mouthpiece for tenor players who double, there are a couple other pieces that appear to expand wider inside the cup than the narrowest point on the rim, and some of the examples surprised me.

Is this a common thing that I just wasn't aware of? It seems like this practice would make the upper register extremely difficult to control.
Fwiw, none of our mouthpieces are wider past the rim.
This was the schematic that I was referring to:

https://www.librassco.com/store-allprod ... oadwaybass

I don't want to have incorrect info here though, if it's just a trick of the eye due to the outer shape, that would make sense. I don't mean this observation in any sort of negative way -- it had just looked that way to me on the site. Please please correct me if my eyes are just playing tricks on me.
LIBrassCo
Posts: 474
Joined: Sun Feb 24, 2019 5:34 am
Location: Long Island, NY
Contact:

Re: Wine glass shaped mouthpieces

Post by LIBrassCo »

muschem wrote: Mon Mar 11, 2024 11:05 am
LIBrassCo wrote: Mon Mar 11, 2024 10:36 am

Fwiw, none of our mouthpieces are wider past the rim.
That's very interesting. I only have one LI Brass Co bass piece to examine, but using my high-precision thumb check, I'd have guessed that it is in fact wider in the cup than at the rim. Perhaps it first narrows from the rim, and then expands back outward in the mid-cup?
Nope. So there's this cool thing that happens with you have a straight cylinder that dumps into a turn, it will always feel like it gets bigger (not the faintest idea why) but no, that doesn't happen on any of our pieces.
Check out our new Pollard Sarastro line of mouthpieces: https://www.librassco.com/pollard-signature-series
LIBrassCo
Posts: 474
Joined: Sun Feb 24, 2019 5:34 am
Location: Long Island, NY
Contact:

Re: Wine glass shaped mouthpieces

Post by LIBrassCo »

harrisonreed wrote: Mon Mar 11, 2024 11:14 am
LIBrassCo wrote: Mon Mar 11, 2024 10:36 am

Fwiw, none of our mouthpieces are wider past the rim.
This was the schematic that I was referring to:

https://www.librassco.com/store-allprod ... oadwaybass

I don't want to have incorrect info here though, if it's just a trick of the eye due to the outer shape, that would make sense. I don't mean this observation in any sort of negative way -- it had just looked that way to me on the site. Please please correct me if my eyes are just playing tricks on me.
Totally a trick of the eye. Nope, not negative at all, just same as you, want whatever is out there to be accurate. If you or anyone else has any questions on any of my designs, I'm happy to answer.
Check out our new Pollard Sarastro line of mouthpieces: https://www.librassco.com/pollard-signature-series
User avatar
Burgerbob
Posts: 5068
Joined: Mon Apr 23, 2018 8:10 pm
Location: LA
Contact:

Re: Wine glass shaped mouthpieces

Post by Burgerbob »

That would also be much more difficult (not impossible, of course) to machine, right?
Aidan Ritchie, LA area player and teacher
User avatar
harrisonreed
Posts: 5165
Joined: Fri Aug 17, 2018 12:18 pm
Location: Fort Riley, Kansas
Contact:

Re: Wine glass shaped mouthpieces

Post by harrisonreed »

LIBrassCo wrote: Mon Mar 11, 2024 11:28 am
harrisonreed wrote: Mon Mar 11, 2024 11:14 am

This was the schematic that I was referring to:

https://www.librassco.com/store-allprod ... oadwaybass

I don't want to have incorrect info here though, if it's just a trick of the eye due to the outer shape, that would make sense. I don't mean this observation in any sort of negative way -- it had just looked that way to me on the site. Please please correct me if my eyes are just playing tricks on me.
Totally a trick of the eye. Nope, not negative at all, just same as you, want whatever is out there to be accurate. If you or anyone else has any questions on any of my designs, I'm happy to answer.
Thanks for the correction! So, scratch off LI Brass CO from this list of wine glass shaped mouthpieces.

There are still some other examples of other brands that I have graphs of that do in fact do this wine glass shaped thing, including a Euphonium specific piece. So maybe it is actually pretty uncommon?
Burgerbob wrote: Mon Mar 11, 2024 11:29 am That would also be much more difficult (not impossible, of course) to machine, right?
It should be pretty straight forward with a boring bar, which are already often used to make mouthpiece cups on CNC machines. You could go wider than the rim by as much as the cutter relief is long (or by the radius of the throat if you only use one boring bar).
LIBrassCo
Posts: 474
Joined: Sun Feb 24, 2019 5:34 am
Location: Long Island, NY
Contact:

Re: Wine glass shaped mouthpieces

Post by LIBrassCo »

Burgerbob wrote: Mon Mar 11, 2024 11:29 am That would also be much more difficult (not impossible, of course) to machine, right?
Depends how crazy you want to go. If it was just a little it's possible you could do it with a boring bar. Otherwise, oh ya that's not fun to do. Ideally I'd make it a screw rim to do that, much easier that way
Check out our new Pollard Sarastro line of mouthpieces: https://www.librassco.com/pollard-signature-series
Kbiggs
Posts: 1269
Joined: Sat Mar 24, 2018 11:46 am
Location: Vancouver WA

Re: Wine glass shaped mouthpieces

Post by Kbiggs »

It looks like the outer diameter of the cup is larger than the inner diameter of the rim, is that what you’re thinking of Harrison? I believe it’s a trompe-l'œil.
Kenneth Biggs
I have known a great many troubles, but most of them have never happened.
—Mark Twain (attributed)
User avatar
harrisonreed
Posts: 5165
Joined: Fri Aug 17, 2018 12:18 pm
Location: Fort Riley, Kansas
Contact:

Re: Wine glass shaped mouthpieces

Post by harrisonreed »

I think it came down to the pixelation of the model making it look like it was curving one way, but I measured it with a screen grab. The two circumferences shown, rim and middle cup, appear to be the same. It's like a cylinder!

My eyes straight up tricked me. Heck, maybe I shoulda been brave enough to do what is shown on the LI Brass CO schematic on my doublers bass mouthpiece design (if you consider a really deep 2G a doublers piece...). I'm still not 100% satisfied with mine. I haven't been able to test any LI Brass CO designs but I've heard them and they sound great.
LIBrassCo
Posts: 474
Joined: Sun Feb 24, 2019 5:34 am
Location: Long Island, NY
Contact:

Re: Wine glass shaped mouthpieces

Post by LIBrassCo »

harrisonreed wrote: Mon Mar 11, 2024 2:56 pm I think it came down to the pixelation of the model making it look like it was curving one way, but I measured it with a screen grab. The two circumferences shown, rim and middle cup, appear to be the same. It's like a cylinder!

My eyes straight up tricked me. Heck, maybe I shoulda been brave enough to do what is shown on the LI Brass CO schematic on my doublers bass mouthpiece design (if you consider a really deep 2G a doublers piece...). I'm still not 100% satisfied with mine. I haven't been able to test any LI Brass CO designs but I've heard them and they sound great.
I've done some even more interesting designs lately in this area, and have some outstanding results. There's more than one way to make it work for sure.
Check out our new Pollard Sarastro line of mouthpieces: https://www.librassco.com/pollard-signature-series
Post Reply

Return to “Mouthpieces”