Large bore tenor with narrow slide and yellow bell

Post Reply
havard
Posts: 34
Joined: Sun Apr 01, 2018 4:04 pm

Large bore tenor with narrow slide and yellow bell

Post by havard »

I am looking for a large bore tenor with narrow slide , yellow bell and valve .

I prefer narrow slide for ergonomy , and yellow bell for stability and projection .
I am considering

Conn 88 HY
Courtois 440B
Yamaha xeno YSL-882O er OD (screw bell)

Suggestions / opinions ?
User avatar
harrisonreed
Posts: 5165
Joined: Fri Aug 17, 2018 12:18 pm
Location: Fort Riley, Kansas
Contact:

Re: Large bore tenor with narrow slide and yellow bell

Post by harrisonreed »

The Shires T47 slide is about that width. They could make you a "Vintage Elkhart" inspired design that has a yellow bell.
User avatar
WilliamLang
Posts: 465
Joined: Fri Nov 22, 2019 6:12 pm

Re: Large bore tenor with narrow slide and yellow bell

Post by WilliamLang »

I haven't tried a new Conn in years that felt great, fwiw. The Courtois line can be really great when dialed in. I like Yamahas more than most (the feedback is very different to the player even if the sound to the audience is the same,) and the 882OR is nice, don't know how it would react with a screw bell though, I haven't been a fan of the cut bells I've tried in the past.
William Lang
Interim Instructor, the University of Oklahoma
Faculty, Manhattan School of Music
Faculty, the Longy School of Music
Artist, Long Island Brass and Stephens Horns
founding member of loadbang
www.williamlang.org
User avatar
harrisonreed
Posts: 5165
Joined: Fri Aug 17, 2018 12:18 pm
Location: Fort Riley, Kansas
Contact:

Re: Large bore tenor with narrow slide and yellow bell

Post by harrisonreed »

If you want ergonomics, Courtois is about as bad as it gets:
Screenshot_20201128-194025.png
You do not have the required permissions to view the files attached to this post.
User avatar
heldenbone
Posts: 167
Joined: Tue Aug 21, 2018 9:17 pm
Location: Ohio

Re: Large bore tenor with narrow slide and yellow bell

Post by heldenbone »

WilliamLang wrote: Mon Sep 04, 2023 7:09 am I haven't tried a new Conn in years that felt great, fwiw. The Courtois line can be really great when dialed in. I like Yamahas more than most (the feedback is very different to the player even if the sound to the audience is the same,) and the 882OR is nice, don't know how it would react with a screw bell though, I haven't been a fan of the cut bells I've tried in the past.
I've had good experience with cut bells, but on very different instruments than that under consideration here. On a Getzen 1062 bass, it stabilized the double trigger range a bit for me. On a 70's King 4BF it made articulations speak faster and upper dynamics cleaner longer before breaking up. Again, different beasts; much depends on the player. Your videos have been marvelous lessons for me. Please continue them.

Richard
--
Richard
User avatar
Matt K
Verified
Posts: 4240
Joined: Tue Mar 20, 2018 10:34 pm
Contact:

Re: Large bore tenor with narrow slide and yellow bell

Post by Matt K »

Bear in mind that in order to put the collar on a bell that is not already modular, one has to remove the bell, put the collar on it and then resolder it back in place. There's a non-zero chance that the tech that reattached it did a good job and simply reattaching it would have yielded at least some of those benefits. Not saying the ring didn't make the whole bell section better in either circumstance, just something to keep in mind when comparing.
MrHCinDE
Posts: 797
Joined: Sun Jul 01, 2018 11:00 am
Location: Ludwigsburg, Germany

Re: Large bore tenor with narrow slide and yellow bell

Post by MrHCinDE »

Bach 42 bell section of some flavour with an Edwards T-STDN slide?

That’s basically my main axe so perhaps I‘m a bit biased but it plays with a lot of the Bach sound and stability mixed with a hint of Conn liveliness. I‘m saying this as a long-term ex-8h/88h player who never really enjoyed a stock Bach 42B but am very happy with this combo, for me the best of both worlds.
Chatname
Posts: 223
Joined: Sat Oct 19, 2019 7:16 am

Re: Large bore tenor with narrow slide and yellow bell

Post by Chatname »

M&W 2Y, Yellow bell with narrow gold brass slide and a great valve. Amazing instrument.
User avatar
bassclef
Posts: 254
Joined: Fri Mar 23, 2018 8:30 am
Location: Ohio, USA

Re: Large bore tenor with narrow slide and yellow bell

Post by bassclef »

Add the Xeno 882 to your list, not the O or OR it's the closed-wrap version. I don't know how or why, but it's a drastically different, and in my opinion - better horn than the 882O.

The OR I saw mentioned above has a much wider slide than the 882 or 882O.
MBurner
Posts: 111
Joined: Fri Mar 15, 2019 1:18 am

Re: Large bore tenor with narrow slide and yellow bell

Post by MBurner »

My colleague built a trombone with a Conn 88 yellow bell, Mt. Vernon Bach 42 valve section, 42 inner slide, and 88H rose brass outer slide. Interesting, no? I really liked the horn. It had the compactness (for lack of a better word) to where the horn really didn’t take much effort to play, but could still be a commanding horn in an orchestra setting. I would have purchased it, if money was no object. He still has it for sale on EBay and FB.
gbedinger
Posts: 91
Joined: Fri Mar 23, 2018 7:40 am
Location: Charm City
Contact:

Re: Large bore tenor with narrow slide and yellow bell

Post by gbedinger »

I had a Shires Elkhart style trombone with 2RVE bell and a 47LW slide. The slide was smaller in width and felt better to me as a primarily bass trombone player. A 42b I had before that with the wide slide never felt right.
User avatar
greenbean
Posts: 1850
Joined: Fri Mar 23, 2018 6:14 pm
Location: San Francisco

Re: Large bore tenor with narrow slide and yellow bell

Post by greenbean »

There is a Japanese seller on eBay with a very nice Yamaha 620 for < $1000. Great horns. Medium-width slide, I guess.
Tom in San Francisco
Currently playing...
Bach Corp 16M
Many French horns
havard
Posts: 34
Joined: Sun Apr 01, 2018 4:04 pm

Re: Large bore tenor with narrow slide and yellow bell

Post by havard »

Different in which way?
I havent seen a closed wrap xeno yet .
Anyone knows if Yamaha plans to upgrade to s more open rotor on their xenos?



bassclef wrote: Tue Sep 05, 2023 2:10 pm Add the Xeno 882 to your list, not the O or OR it's the closed-wrap version. I don't know how or why, but it's a drastically different, and in my opinion - better horn than the 882O.

The OR I saw mentioned above has a much wider slide than the 882 or 882O.
Digidog
Posts: 307
Joined: Thu Dec 13, 2018 3:31 pm

Re: Large bore tenor with narrow slide and yellow bell

Post by Digidog »

harrisonreed wrote: Mon Sep 04, 2023 7:57 am If you want ergonomics, Courtois is about as bad as it gets:

Screenshot_20201128-194025.png
This for real?? Looks like some photoshopping going on there....

Anyone with Courtois experience who could chime in on this? I'm ogling a Courtois 422, but haven't had the time to go check it out in person.
Welcome to visit my web store: https://www.danieleng.com/

Big Engband on Spotify: https://open.spotify.com/artist/30Vuft1 ... me3sZi8q-A
User avatar
harrisonreed
Posts: 5165
Joined: Fri Aug 17, 2018 12:18 pm
Location: Fort Riley, Kansas
Contact:

Re: Large bore tenor with narrow slide and yellow bell

Post by harrisonreed »

Digidog wrote: Sun Oct 15, 2023 3:30 am
harrisonreed wrote: Mon Sep 04, 2023 7:57 am If you want ergonomics, Courtois is about as bad as it gets:

Screenshot_20201128-194025.png
This for real?? Looks like some photoshopping going on there....

Anyone with Courtois experience who could chime in on this? I'm ogling a Courtois 422, but haven't had the time to go check it out in person.
It's a screen grab of Jorgen van Rijen playing his Courtois. It's real.



I think he came up with an alternate grip, too:



He's not the only one:



And yet another example of the same person using a second alternative grip on the same trombone:



NB: Both Weston and Jorgen sound amazing on their Courtois trombones - not knocking them (that's why the original pic didn't show who the player was) and it obviously works for them. It's just interesting that neither one can seem to settle on a grip. I pinched the side of my palm more or less immediately the first time I tried a Courtois, and I personally wouldn't want to hold my trombone like this. The Weston Sprott horn package was something I was immediately drawn to at the convention -- it fits in a viola case!
User avatar
harrisonreed
Posts: 5165
Joined: Fri Aug 17, 2018 12:18 pm
Location: Fort Riley, Kansas
Contact:

Re: Large bore tenor with narrow slide and yellow bell

Post by harrisonreed »

OP, how about the Getzen offerings? The Bousfield horn is also Conn width, as are some of the Eterna horns. Maybe ever so slightly wider.
User avatar
bassclef
Posts: 254
Joined: Fri Mar 23, 2018 8:30 am
Location: Ohio, USA

Re: Large bore tenor with narrow slide and yellow bell

Post by bassclef »

havard wrote: Sun Oct 15, 2023 1:29 am Different in which way?
There's an entire thread about this. Including a very long post where I compare the 882 to the 882OR.
viewtopic.php?p=206810#p206810

This was written days after I picked up the 882 after having played an 882OR for years. Now that some time has passed and I've played them more, I still stand by everything I wrote. The 882 bell section with the 882OR slide is my personal favorite large bore I've ever played. The stock 882 with the narrow slide is also great. I'm excited to be able to have and play this variable setup.
User avatar
Trav1s
Posts: 412
Joined: Thu Jul 26, 2018 9:06 am
Location: Central Ohio

Re: Large bore tenor with narrow slide and yellow bell

Post by Trav1s »

harrisonreed wrote: Sun Oct 15, 2023 6:31 am OP, how about the Getzen offerings? The Bousfield horn is also Conn width, as are some of the Eterna horns. Maybe ever so slightly wider.
Bousfield model has a gold brass bell.

882 is a great option for sure.
Travis B.
Trombone player since 1986 and Conn-vert since 2006
1961 24H - LT101/C+/D2
1969 79H - LT102/D/D4
1972 80H - Unicorn
Benge 165F LT102/F+/G8
Digidog
Posts: 307
Joined: Thu Dec 13, 2018 3:31 pm

Re: Large bore tenor with narrow slide and yellow bell

Post by Digidog »

harrisonreed wrote: Sun Oct 15, 2023 6:02 am
Digidog wrote: Sun Oct 15, 2023 3:30 am

This for real?? Looks like some photoshopping going on there....

Anyone with Courtois experience who could chime in on this? I'm ogling a Courtois 422, but haven't had the time to go check it out in person.
It's a screen grab of Jorgen van Rijen playing his Courtois. It's real.



I think he came up with an alternate grip, too:



He's not the only one:



And yet another example of the same person using a second alternative grip on the same trombone:



NB: Both Weston and Jorgen sound amazing on their Courtois trombones - not knocking them (that's why the original pic didn't show who the player was) and it obviously works for them. It's just interesting that neither one can seem to settle on a grip. I pinched the side of my palm more or less immediately the first time I tried a Courtois, and I personally wouldn't want to hold my trombone like this. The Weston Sprott horn package was something I was immediately drawn to at the convention -- it fits in a viola case!
Thanks for clarifying and showing what was going on there! It sure looks like a weird grip. That ergonomics would be deterring me from getting a Courtois, unless there were a work-around, or easy fix of some kind (like changing slide).

I would not want to hold my horn that way, either. I have pinched myself on a Conn 88 with the spring installed, and it was a painful experience - it was actually more of a cut that made an open wound on the outer side of my left hand (in the flesh just behind the little finger), than a pinch.

....and I agree: Both players are great and sound really good.
Welcome to visit my web store: https://www.danieleng.com/

Big Engband on Spotify: https://open.spotify.com/artist/30Vuft1 ... me3sZi8q-A
User avatar
Cotboneman
Posts: 201
Joined: Fri Jul 27, 2018 4:16 pm
Location: Tucson, AZ
Contact:

Re: Large bore tenor with narrow slide and yellow bell

Post by Cotboneman »

havard wrote: Mon Sep 04, 2023 3:22 am I am looking for a large bore tenor with narrow slide , yellow bell and valve .

I prefer narrow slide for ergonomy , and yellow bell for stability and projection .
I am considering

Conn 88 HY
Courtois 440B
Yamaha xeno YSL-882O er OD (screw bell)

Suggestions / opinions ?
I have a modern Conn 88HY, with a 47/62 slide in rose brass and three leadpipes (I use the medium). I'm rather fond of that horn - it does project! It's also a much lighter horn than my Bach 42AF. Last year though I had to play some second trombone in an orchestra. The blend with the first was not terrific in the rehearsals (he plays an older Yamaha), so I switched to my Bach for a much better result. My Conn is much more at home I believe in bands, as a solo instrument, or in the quartet and quintets that I play in regularly. Hopefully you have a chance to try all the horns that you listed. That is the key. Good luck!
rptbone
Posts: 0
Joined: Wed Dec 27, 2023 9:30 am

Re: Large bore tenor with narrow slide and yellow bell

Post by rptbone »

How can one fairly generalize that Courtois trombone have “bad ergonomics” because a few pro players use unconventional grips? They would likely use the same grips if they used Bach trombones too, so would that make Bach trombones also ergonomically bad? NO. Let’s be fair here. BTW, their (van Rijen and Sprott) slides are not narrow either. Try one first, I did, and own two with no regrets.
User avatar
Matt K
Verified
Posts: 4240
Joined: Tue Mar 20, 2018 10:34 pm
Contact:

Re: Large bore tenor with narrow slide and yellow bell

Post by Matt K »

Those images aren't of unconventional grips, they're demonstrating that the cork barrels are super short on the Courtouis.
rptbone
Posts: 0
Joined: Wed Dec 27, 2023 9:30 am

Re: Large bore tenor with narrow slide and yellow bell

Post by rptbone »

Nope
rptbone
Posts: 0
Joined: Wed Dec 27, 2023 9:30 am

Re: Large bore tenor with narrow slide and yellow bell

Post by rptbone »

Instead of speculating, either get out your calipers and use them, or ask the two out of hundreds of artists why they use odd hand grips. The cork barrels on the Courtois are no shorter than on Bach 42.
User avatar
Matt K
Verified
Posts: 4240
Joined: Tue Mar 20, 2018 10:34 pm
Contact:

Re: Large bore tenor with narrow slide and yellow bell

Post by Matt K »

Again, it has nothing to do with individual player's handgrips. I don't think you need to take measurements to notice that people's fingers are dangling off the end of the cork barrel. None of my trombone shave clearance that short
rptbone
Posts: 0
Joined: Wed Dec 27, 2023 9:30 am

Re: Large bore tenor with narrow slide and yellow bell

Post by rptbone »

Circular logic…
User avatar
Matt K
Verified
Posts: 4240
Joined: Tue Mar 20, 2018 10:34 pm
Contact:

Re: Large bore tenor with narrow slide and yellow bell

Post by Matt K »

It's not circular logic for people to suggest that their direct experience with a thing being uncomfortable is... well... uncomfortable. I've also nicked my hand trying out Courtouis horns before, too. Clearly it isn't a problem for everyone. Would you like a recording of the scream I make when I nick my hand returning the slide to 1st so that you can validate it's actually me experiencing pain?
rptbone
Posts: 0
Joined: Wed Dec 27, 2023 9:30 am

Re: Large bore tenor with narrow slide and yellow bell

Post by rptbone »

Hit a nerve did we? Who cares.
User avatar
harrisonreed
Posts: 5165
Joined: Fri Aug 17, 2018 12:18 pm
Location: Fort Riley, Kansas
Contact:

Re: Large bore tenor with narrow slide and yellow bell

Post by harrisonreed »

rptbone wrote: Mon Jan 15, 2024 9:17 am Hit a nerve did we? Who cares.
It's not the narrow slide, it's the super short cork barrels. You must have small hands so it doesn't bother you. It's cool to like Courtois. It's even cool to be looking at Bach to move away from your Courtois. You're picking fights with the admins though, come on. How about you measure the grip on yours, since you actually bought one and are trying to prove a point, and I'll measure the grip on my Edwards and King.

I would argue that, in general and for most adult players, the Courtois is very difficult to hold with a regular grip.
User avatar
harrisonreed
Posts: 5165
Joined: Fri Aug 17, 2018 12:18 pm
Location: Fort Riley, Kansas
Contact:

Re: Large bore tenor with narrow slide and yellow bell

Post by harrisonreed »

20240115_104322.jpg
It's 4.5cm from the inside of the brace to the edge of the barrel on Edwards. And that's with leather over the brace.
You do not have the required permissions to view the files attached to this post.
AtomicClock
Posts: 337
Joined: Thu Oct 19, 2023 8:01 pm
Location: USA

Re: Large bore tenor with narrow slide and yellow bell

Post by AtomicClock »

I'd be interested to see some Courtois numbers. Though I have to admit that over the years I've gone through most of the grips pictured above on my (measures 4.4cm) Bach 42 slide. They all look normal to me. A testament to awkward trombone ergonomics.
rptbone
Posts: 0
Joined: Wed Dec 27, 2023 9:30 am

Re: Large bore tenor with narrow slide and yellow bell

Post by rptbone »

Thank you for proving my point. On the Courtois AC420, it's also 4.5cm from the inside of the brace to the edge of the barrel. So are you now going to claim that both Edwards and Bach 42 have "super short" cork barrels too? To challenge unfounded generalizations is not picking a fight. Measurements are indeed important because the numbers are not subjective. BTW, I wear XL gloves, and find the Courtois just as ergonomic as the Bach, but the Courtois workmanship is consistently far better (based on experience.) I do own three Bach small bore tenors as well, and wanted to love the 42 series, but kept getting duds.
User avatar
harrisonreed
Posts: 5165
Joined: Fri Aug 17, 2018 12:18 pm
Location: Fort Riley, Kansas
Contact:

Re: Large bore tenor with narrow slide and yellow bell

Post by harrisonreed »

rptbone wrote: Mon Jan 15, 2024 10:27 am Thank you for proving my point. On the Courtois AC420, it's also 4.5cm from the inside of the brace to the edge of the barrel.
Could you take a pic of your calipers measuring it like I did? I'd like to get to the bottom of why the Courtois is so dang hard to hold. I'll also do a diameter one, because that might be it too. The Edwards has a lip at the end of the barrels.

It could be that different models have different grips too.
User avatar
harrisonreed
Posts: 5165
Joined: Fri Aug 17, 2018 12:18 pm
Location: Fort Riley, Kansas
Contact:

Re: Large bore tenor with narrow slide and yellow bell

Post by harrisonreed »

20240115_114205.jpg
20240115_114229.jpg
The Edwards barrel is 2.6 cm in diameter.

The slide is 1.7.

If the Courtois isn't shorter, it could be narrower on the grip or wider on the outside of the slide.

But pics would help. I've been saying the thing is hard to hold because of short cork barrels for a long time and want to correct myself if I was wrong. Pics of the three measurements are what I need, and then I gotta go back and correct the two three threads where I've made the claim.
You do not have the required permissions to view the files attached to this post.
Last edited by harrisonreed on Mon Jan 15, 2024 10:52 am, edited 1 time in total.
OneTon
Posts: 666
Joined: Tue Nov 02, 2021 11:44 am

Re: Large bore tenor with narrow slide and yellow bell

Post by OneTon »

The Admin appears to be saying, if the hand overhangs the barrel, then the barrel is short. And if the barrel is not short, the hand does not overhang the barrel. Since the contra positive of a true if then statement is always true, the criteria for circular reasoning is not met. All tragedy has its comic aspect.
Richard Smith
Wichita, Kansas
User avatar
harrisonreed
Posts: 5165
Joined: Fri Aug 17, 2018 12:18 pm
Location: Fort Riley, Kansas
Contact:

Re: Large bore tenor with narrow slide and yellow bell

Post by harrisonreed »

I for real want to right my wrong if I've been mistaken on the reason for this long.
rptbone
Posts: 0
Joined: Wed Dec 27, 2023 9:30 am

Re: Large bore tenor with narrow slide and yellow bell

Post by rptbone »

🤦‍♂️
User avatar
harrisonreed
Posts: 5165
Joined: Fri Aug 17, 2018 12:18 pm
Location: Fort Riley, Kansas
Contact:

Re: Large bore tenor with narrow slide and yellow bell

Post by harrisonreed »

So you won't take pics. Just your word? Pretty please?

FWIW, Michel Becquet also holds his Courtois with the crumpled hand grip. Something is going on.
rptbone
Posts: 0
Joined: Wed Dec 27, 2023 9:30 am

Re: Large bore tenor with narrow slide and yellow bell

Post by rptbone »

It would be better for you to take your own measurements to be satisfied.
OneTon
Posts: 666
Joined: Tue Nov 02, 2021 11:44 am

Re: Large bore tenor with narrow slide and yellow bell

Post by OneTon »

With all due respect, the OP requested examples of trombones with narrow slides and yellow bells. If a Courtois meets that criteria, great. If we want to warn the OP that some folks find the ergonomics of Courtois trombones to be challenging in general, and and warn the OP to evaluate the barrel lengths to determine the viability for personal use, that is fine. Debating human factors and barrel lengths might warrant starting a new thread.
Richard Smith
Wichita, Kansas
rptbone
Posts: 0
Joined: Wed Dec 27, 2023 9:30 am

Re: Large bore tenor with narrow slide and yellow bell

Post by rptbone »

Agree. The third post is where the Courtois ergonomics thing started.
rptbone
Posts: 0
Joined: Wed Dec 27, 2023 9:30 am

Re: Large bore tenor with narrow slide and yellow bell

Post by rptbone »

Correction: refer to 4th post
User avatar
harrisonreed
Posts: 5165
Joined: Fri Aug 17, 2018 12:18 pm
Location: Fort Riley, Kansas
Contact:

Re: Large bore tenor with narrow slide and yellow bell

Post by harrisonreed »

👍
User avatar
ithinknot
Posts: 1107
Joined: Fri Jul 24, 2020 3:40 pm

Re: Large bore tenor with narrow slide and yellow bell

Post by ithinknot »

harrisonreed wrote: Mon Jan 15, 2024 10:40 am I'd like to get to the bottom of why the Courtois is so dang hard to hold.
It's going to be an issue with wrist position, in the "hand held flat, waving without wrist rotation" plane. If the barrels are a normal length, it's the lever position (or the bell brace position that influences that lever position).

Basically, for your hand the lever is probably either too low, too horizontally close to the bell brace, or some combination. Both planes matter ("height" relative to inner slide brace, "width" relative to the bell brace and mouthpiece receiver).

I have a related problem on the 60H I just got. The barrels are a normal length, and if I pick it up the way I would naturally, there's no risk of palm slice. But the under-thumb lever is close to the bell brace, and at that default grip angle the thumb is too far forward to operate it with minimal motion and, worse, the meaty thumb/palm muscles interfere with the back of the lever. So, I have to tilt my wrist horizontally (i.e. fingers move towards nose). Once the thumb joint is in a more effective position and the thumb muscle is clear of the valve lever, the outside of my palm is overhanging the barrel and Paul Thomas Anderson is planning a bloody sequel. It's worse on those Conns because there's no trim ring or knurling to remind you where the edge is.
User avatar
harrisonreed
Posts: 5165
Joined: Fri Aug 17, 2018 12:18 pm
Location: Fort Riley, Kansas
Contact:

Re: Large bore tenor with narrow slide and yellow bell

Post by harrisonreed »

I don't want to derail any further, but that could be it. Those measurements would definitely help though...
Last edited by harrisonreed on Sun Jan 21, 2024 1:06 pm, edited 1 time in total.
ZacharyThornton
Posts: 504
Joined: Fri Mar 23, 2018 7:51 am

Re: Large bore tenor with narrow slide and yellow bell

Post by ZacharyThornton »

How about this… next week I will measure a Bach 42, Coutrois 420BH, Edwards 396A, and Shires TB47. I have all of those around the shop I work at. Maybe more.
ZacharyThornton
Posts: 504
Joined: Fri Mar 23, 2018 7:51 am

Re: Large bore tenor with narrow slide and yellow bell

Post by ZacharyThornton »

My measurements and models I measured:
sckarpen
Posts: 20
Joined: Fri Dec 23, 2022 8:37 am

Re: Large bore tenor with narrow slide and yellow bell

Post by sckarpen »

They may have stopped producing them (maybe there’s a used one out there), but Schilke used to have a narrow slide option with their large bore tenor. I’ve never played one, but a Schilke representative that I spoke to said that they were similar to Yamaha Xenos — which I have played, and like well enough.
Post Reply

Return to “Instruments”