maintaining a smooth working carbon fibre slide
-
- Posts: 8
- Joined: Sat Jan 16, 2021 9:51 pm
maintaining a smooth working carbon fibre slide
I'm considering putting a carbon fibre outer slide on my bass trombone. The makers say that it needs to be kept dry to stay working well.
So, I'm looking for players who have a carbon fibre slide. How finicky is it? Is it a problem keeping it working well in a session?
Thanks
Kenton
So, I'm looking for players who have a carbon fibre slide. How finicky is it? Is it a problem keeping it working well in a session?
Thanks
Kenton
- elmsandr
- Posts: 1075
- Joined: Fri Mar 23, 2018 2:43 pm
- Location: S.E. Michigan
- Contact:
Re: maintaining a smooth working carbon fibre slide
Not too finicky. Just keep it mostly clean. A swab every now and then will keep it fine. You will notice that when it gets dirty and sticky it will take force to move it. However, if you grab a regular slide you will realize that even dirty it takes less force than moving a normal slide.
Definitely an adjustment, but keeping it clean has been no more difficult than a normal slide.
Cheers,
Andy
Definitely an adjustment, but keeping it clean has been no more difficult than a normal slide.
Cheers,
Andy
-
- Posts: 1593
- Joined: Tue Mar 27, 2018 5:51 am
- Location: central Virginia
Re: maintaining a smooth working carbon fibre slide
My pBone mini slide does a similar thing. Dry it's not bad, but as soon as breath condenses or spit accumulates there is a suction feeling drag. I yank the slide off and dry the inner slide about every three minutes. Of course with the shorter alto slides that's not difficult, it would be hard on a full size.
-
- Posts: 8
- Joined: Sat Jan 16, 2021 9:51 pm
Re: maintaining a smooth working carbon fibre slide
That was the source of my question. I have a pbone, and keeping the slide working smoothly is annoying.
-
- Posts: 373
- Joined: Wed Jul 29, 2020 1:12 pm
Re: maintaining a smooth working carbon fibre slide
I was never able to get my pbone slide working. I guess I didn't properly wear it in and now it's pretty much stuck like this for ever.
-
- Posts: 8
- Joined: Sat Jan 16, 2021 9:51 pm
Re: maintaining a smooth working carbon fibre slide
Butler talks about using BERP biolube lubricant on the stockings. And, also using pure Carnauba wax on the inner and outer slides. I might try those options on the pbone first and see how effective it is.
-
- Posts: 589
- Joined: Thu Jan 17, 2019 7:45 am
Re: maintaining a smooth working carbon fibre slide
What does Butler suggest in regaurs to maintaining their slides?
-
- Posts: 3888
- Joined: Fri Mar 23, 2018 9:54 pm
- Location: California
Re: maintaining a smooth working carbon fibre slide
Please don't confuse carbon fiber slides (from Butler) with pBone slides, which are plastic (definitely NOT carbon fiber), with brass stockings. They're both black and non-metallic, but the similarity stops there.
They may require different lubrication.
They may require different lubrication.
-
- Posts: 373
- Joined: Wed Jul 29, 2020 1:12 pm
Re: maintaining a smooth working carbon fibre slide
I'm pretty sure that pbone inners are carbon fiber but I may be wrong.
-
- Posts: 125
- Joined: Tue Apr 07, 2020 4:55 pm
- Location: Sweden
Re: maintaining a smooth working carbon fibre slide
Pbones have plastic outers with what seems to be raw brass stockings over the plastic inner tubes.
Butler trombones use stock inner slides, so they really aren't that similar.
Student in Sweden, usually looking for more trombones
-
- Posts: 8
- Joined: Sat Jan 16, 2021 9:51 pm
Re: maintaining a smooth working carbon fibre slide
Here is Butler's commentary on maintenance: http://butlertrombones.com/?page_id=1008
I realize that the pbone and the carbon fibre handslides are not using the same materials, but, they both are using metal sleeves in a non metal outer tube. So, it seems at least plausible that a lubrication that works for one, might have a chance with the other. Additionally, the BERP product is supposed to work well with a standard slide.
In any case, it is worth experimenting.
I realize that the pbone and the carbon fibre handslides are not using the same materials, but, they both are using metal sleeves in a non metal outer tube. So, it seems at least plausible that a lubrication that works for one, might have a chance with the other. Additionally, the BERP product is supposed to work well with a standard slide.
In any case, it is worth experimenting.
-
- Posts: 1593
- Joined: Tue Mar 27, 2018 5:51 am
- Location: central Virginia
Re: maintaining a smooth working carbon fibre slide
pBone slide crooks and braces are injection molded plastic.
But inner and outer slides are fiber reinforced resin, same basic principle as the carbon fiber.
Wax on the brass stocking is critical because otherwise it quickly corrodes and drags. You do have to occasionally polish. If you did that when new (i didn't) you could probably avoid some problems. Mine also had a sharp edge on the brass that need careful filing.
But inner and outer slides are fiber reinforced resin, same basic principle as the carbon fiber.
Wax on the brass stocking is critical because otherwise it quickly corrodes and drags. You do have to occasionally polish. If you did that when new (i didn't) you could probably avoid some problems. Mine also had a sharp edge on the brass that need careful filing.
-
- Posts: 377
- Joined: Sun Mar 25, 2018 1:10 pm
- Location: Pennsylvania
Re: maintaining a smooth working carbon fibre slide
I have a Butler C-12 bass and have tried all of Dave Butler's suggestions for keeping the slide working at its best. I've tried carnuba wax, Berp slide lube and even Yamasnot. The trick is to keep ANY moisture from accumulating. I decided to outfit my slide with a "JoyKey" which allows almost zero accumulation of water in the slide because it is in a constant state of draining. An occasional wipe with a toweled rod and it has excellent action. The disadvantage is the water constantly spraying off the end of the slide which could alienate players who are unfortunate enough to be in front of you. Andrew Joy, inventor of the "JoyKey" makes an "SOB" which is nothing more than a rubber ball which fits over the "JoyKey" that collects the water for later disposal. A great solution !
-
- Posts: 3888
- Joined: Fri Mar 23, 2018 9:54 pm
- Location: California
Re: maintaining a smooth working carbon fibre slide
Wow. Lots of confusion here. As I understand it:
Butler slides: CFRP [carbon fiber reinforced polymer composite] outer slides;
Chrome-plated nickel-silver inner slides (just like your brass trombone);
pBone and Tromba slides: ABS plastic outer slides;
Fiberglass-reinforced (?) ABS resin inner slides, with raw brass stockings.
Definitely not carbon fiber, which is a different animal than fiberglass, and much more expensive to fabricate.
So … the lubrication requirements are necessarily somewhat different:
Butler: Carbon fiber sliding over nickel-plated brass tubes and stockings
pBone / Tromba: ABS plastic sliding over raw brass stockings / fiberglass plastic tubes
It's clear from picking up any of these slides - they feel VERY different!
Butler recommends carnauba wax for their slides.
For pBone, it makes sense to at least smooth and wax the raw brass stockings.
After that, Butler recommends the BERP lubricant (only on the stockings) and no water for their slides.
pBone lube recommendations have been variable; don't know their latest.
I've never seen a silky smooth pBone slide.
Butler slides: CFRP [carbon fiber reinforced polymer composite] outer slides;
Chrome-plated nickel-silver inner slides (just like your brass trombone);
pBone and Tromba slides: ABS plastic outer slides;
Fiberglass-reinforced (?) ABS resin inner slides, with raw brass stockings.
Definitely not carbon fiber, which is a different animal than fiberglass, and much more expensive to fabricate.
So … the lubrication requirements are necessarily somewhat different:
Butler: Carbon fiber sliding over nickel-plated brass tubes and stockings
pBone / Tromba: ABS plastic sliding over raw brass stockings / fiberglass plastic tubes
It's clear from picking up any of these slides - they feel VERY different!
Butler recommends carnauba wax for their slides.
For pBone, it makes sense to at least smooth and wax the raw brass stockings.
After that, Butler recommends the BERP lubricant (only on the stockings) and no water for their slides.
pBone lube recommendations have been variable; don't know their latest.
I've never seen a silky smooth pBone slide.
-
- Posts: 1593
- Joined: Tue Mar 27, 2018 5:51 am
- Location: central Virginia
Re: maintaining a smooth working carbon fibre slide
So the entire Butler inner is metal? didn't know that.
pBone slides can be pretty slick right after waxing but for me it doesn't last. List member Phillip is very good at it though, his work well. They get sticky with moisture, it feels like suction. But the light weight makes them usable anyway.
pBone slides can be pretty slick right after waxing but for me it doesn't last. List member Phillip is very good at it though, his work well. They get sticky with moisture, it feels like suction. But the light weight makes them usable anyway.
-
- Posts: 8
- Joined: Sat Jan 16, 2021 9:51 pm
Re: maintaining a smooth working carbon fibre slide
I tried BERP on my Pbone last night. It seems to work well initially, After a couple of songs, it started dragging just a bit. Wiping the inner slide with just my hand seemed to work pretty well. And, I also tried putting a rod with cloth on the end, and running that down the hand slide and that also seemed to work well. I don't currently have any carnauba wax (but it is on order). I'm curious how it will work on the pbone. I would be nice to have a swabbing rod like bassoon players have to keep handy.
I understand that B.A,C also makes carbon fibre slides. Has anyone had any experience with their product?
I understand that B.A,C also makes carbon fibre slides. Has anyone had any experience with their product?
- elmsandr
- Posts: 1075
- Joined: Fri Mar 23, 2018 2:43 pm
- Location: S.E. Michigan
- Contact:
Re: maintaining a smooth working carbon fibre slide
It is an entirely conventional inner slide. Mine happens to be interchangeable with my Bach 50 inners.
Returning to topic.. I have used both the Bio-lube provided and a trombontine/silicone drops that I use on normal horns. After a few cleanings and dryings, I forget what is even on it now... Not playing a ton during the pandemic, but if I pick this up and it is dragging, I just hit the outer with the swab, put it back on and keep playing. When it builds up a bunch of water, drain the water key, maybe swab it out, and keep going. This is to say I do not find it a particularly finicky piece of equipment. It did take several cleanings to get rid of some scratchiness, but it now seems to require less maintenance than my brass slides.
Cheers,
Andy
-
- Posts: 8
- Joined: Sat Jan 16, 2021 9:51 pm
Re: maintaining a smooth working carbon fibre slide
Andy, as a side question, what do you use as a swab? At the moment, all I have around here is a cleaning rod. And, it seems that something more like a bassoon swab would work better.
-
- Posts: 3888
- Joined: Fri Mar 23, 2018 9:54 pm
- Location: California
-
- Posts: 8
- Joined: Sat Jan 16, 2021 9:51 pm
Re: maintaining a smooth working carbon fibre slide
Thanks for the recommendation! It is now on order.
- elmsandr
- Posts: 1075
- Joined: Fri Mar 23, 2018 2:43 pm
- Location: S.E. Michigan
- Contact:
Re: maintaining a smooth working carbon fibre slide
Have both a standard cleaning rod with cheesecloth and the cleaning rod with the slideomix sock style thing that came with the slide from Butler. Grab whichever one is closer.
This thing really does just seem to want to be clean and dry.
Cheers,
Andy
-
- Posts: 8
- Joined: Sat Jan 16, 2021 9:51 pm
Re: maintaining a smooth working carbon fibre slide
I figured I better report back in. I ordered some carnauba & Bees wax paste. Working on the Pbone, I polished up the metal sleeves and then I put the wax on the inner outer slide and the outside inner slide. The results are impressive. The slide is faster than it has ever been and unlike before when I might get through one song before it started dragging, I played through 4 songs and is still fine.
-
- Posts: 3
- Joined: Tue Jul 12, 2022 3:51 pm
Re: maintaining a smooth working carbon fibre slide
What about silicon spray on stockings and shafts both?
-
- Posts: 8
- Joined: Sat Jan 16, 2021 9:51 pm
Re: maintaining a smooth working carbon fibre slide
I've not tried that. If you do, please report your findings.
-
- Posts: 263
- Joined: Sat Apr 14, 2018 12:18 am
Re: maintaining a smooth working carbon fibre slide
Butler’s recommendation of a thin coat of Berp BioLube plus a drop or two either Yamaha slide lube or the small bottle of Slide-O-Mix works very well. Personally, I always wipe down the inners and dry every part of the slide when I’m finished playing for the day, so the slide starts dry. Just regularly emptying the slide via the water key keeps me going.
-
- Posts: 3
- Joined: Sat Apr 13, 2024 9:02 am
Re: maintaining a smooth working carbon fibre slide
Having used a carbon fiber slide for 2 years now, let me pass on what I have learned. At first I was somewhat frustrated. It seemed that I was having to do like my woodwind friends and swab out my slide between numbers; what a pain. Any water on the slide really slowed it down and made it next to horrible.
I learned the secret finally. I apply a very thin coat of Berb’s BioLube on just the stockings (as recommended) then I only use three drops of the Slide-o-Mix Rapid Comfort in each of the outer tubes. This keeps me from having to swab the slide out. I keep a cleaner slide than I have in decades and prepare the slide for each rehearsal or concert. What I think is happening is that this technique creates a hydro seal against condensation wicking up the slide. The carbon fiber slide wants absolute dryness! Be prepared to evacuate your water every chance you get. I have not used a water bottle in two years (all the flute players are happy I don’t spray them anymore).
I was pleased enough to have David Butler custom build a slide for my 1947 Olds standard dual bore jazz horn. I feel that my technique and speed have improved with the carbon fiber slides. Both horns slot well, and I have no complaints from any of my contractors.
I learned the secret finally. I apply a very thin coat of Berb’s BioLube on just the stockings (as recommended) then I only use three drops of the Slide-o-Mix Rapid Comfort in each of the outer tubes. This keeps me from having to swab the slide out. I keep a cleaner slide than I have in decades and prepare the slide for each rehearsal or concert. What I think is happening is that this technique creates a hydro seal against condensation wicking up the slide. The carbon fiber slide wants absolute dryness! Be prepared to evacuate your water every chance you get. I have not used a water bottle in two years (all the flute players are happy I don’t spray them anymore).
I was pleased enough to have David Butler custom build a slide for my 1947 Olds standard dual bore jazz horn. I feel that my technique and speed have improved with the carbon fiber slides. Both horns slot well, and I have no complaints from any of my contractors.
-
- Posts: 1
- Joined: Thu Aug 15, 2024 1:59 pm
Re: maintaining a smooth working carbon fibre slide
I just tried BERP bio lube, then a drop of the small bottle of Slide-o-mix on my DaCarbo slide. Initially, the slide is like bottled lightning! I’ll report back after a couple of days (I normally clean my slide & apply a thin coat of BERP before playing every time)
-
- Posts: 2
- Joined: Sun Aug 18, 2024 5:26 am
Re: maintaining a smooth working carbon fibre slide
I have a .500 slide with carbon fiber outers that I've almost stopped using because I got so tired of having to wipe the inners every other song during gigs. I came across this thread and got the BERP bio lube to try and see if it would help. It's a night and day difference! I wish I knew about this sooner!