This bell is absolutely nuts!
- baBposaune
- Posts: 246
- Joined: Mon Jan 21, 2019 4:55 pm
- Location: North San Diego County
This bell is absolutely nuts!
I bought a Shires BII 7GM very recently in hopes of getting somewhat close to the sound and feel of an Elkhart 62. It played pretty well although it was a tad on the lighter side and a bit wide. So I thought, "Hmm...what about cutting the bell and installing a threaded ring?" This is the result after the man, Stephen Shires did the work for me. It plays like an Elkhart Conn on steroids. Wonderful.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 3888
- Joined: Fri Mar 23, 2018 9:54 pm
- Location: California
- baBposaune
- Posts: 246
- Joined: Mon Jan 21, 2019 4:55 pm
- Location: North San Diego County
Re: This bell is absolutely nuts!
The ring warmed up the sound and I can push the volume much more without the tone spreading. I've been "A/B/C-ing" it with my Shires and two Elkhart 62Hs. Really glad and followed my instincts (and experience) and had this mod done. Not only can I get a flat case for stowing on a flight in the overheard bins but it turned an "Okay" bell into an improved one.
Blair Bollinger once said, "Never cut a bell you like." This one was a good candidate to have the screw ring added since it was not a favorite. It doesn't play exactly like a vintage Conn but it has some of the similar character and I will be using this bell now.
Blair Bollinger once said, "Never cut a bell you like." This one was a good candidate to have the screw ring added since it was not a favorite. It doesn't play exactly like a vintage Conn but it has some of the similar character and I will be using this bell now.
-
- Posts: 1444
- Joined: Tue Jan 14, 2020 10:52 am
Re: This bell is absolutely nuts!
That’s wonderful! I love it when you have a piece of equipment that doesn’t work for you and a little modification can make it work like magic.
I had a Bach 36 bell that I mounted on an otherwise Bach 42 bell section. I was so disappointed because it played very stiff and stuffy. Since the bell came to me completely smashed, I figured the problem was that the bell was work-hardened from all of the dent work. After I annealed it and remounted it, the bell was astounding!
Enjoy your new bell!
I had a Bach 36 bell that I mounted on an otherwise Bach 42 bell section. I was so disappointed because it played very stiff and stuffy. Since the bell came to me completely smashed, I figured the problem was that the bell was work-hardened from all of the dent work. After I annealed it and remounted it, the bell was astounding!
Enjoy your new bell!
Brian D. Hinkley - Player, Teacher, Technician and Trombone Enthusiast
-
- Posts: 1423
- Joined: Wed Sep 04, 2019 2:32 pm
Re: This bell is absolutely nuts!
I’ve always been curious as to whether cutting a bell flare that’s on the lighter side would add just enough weight to make it better. Now you have me thinking.
- baBposaune
- Posts: 246
- Joined: Mon Jan 21, 2019 4:55 pm
- Location: North San Diego County
Re: This bell is absolutely nuts!
In this case it did make it warmer and the added weight made the sound more "together" than it was before. FYI for folks who are interested I ordered the threaded ring from M&K Drawing and Bending by calling them and they asked for the brand of instrument. Couldn't find it on their website and had been told they make them. Stephen Shires told me that the fit is very good.
Matt Varho
-
- Posts: 1423
- Joined: Wed Sep 04, 2019 2:32 pm
Re: This bell is absolutely nuts!
baBposaune wrote: ↑Fri Mar 03, 2023 7:22 amIn this case it did make it warmer and the added weight made the sound more "together" than it was before. FYI for folks who are interested I ordered the threaded ring from M&K Drawing and Bending by calling them and they asked for the brand of instrument. Couldn't find it on their website and had been told they make them. Stephen Shires told me that the fit is very good.
Matt Varho
-
- Posts: 1015
- Joined: Wed May 02, 2018 9:20 pm
Re: This bell is absolutely nuts!
Instrument Innovations (Mike Olson). M/K don't make screw ring sets.baBposaune wrote: ↑Fri Mar 03, 2023 7:22 amIn this case it did make it warmer and the added weight made the sound more "together" than it was before. FYI for folks who are interested I ordered the threaded ring from M&K Drawing and Bending by calling them and they asked for the brand of instrument. Couldn't find it on their website and had been told they make them. Stephen Shires told me that the fit is very good.
Matt Varho
Matthew Walker
Owner/Craftsman, M&W Custom Trombones, LLC, Jackson, Wisconsin.
Former Bass Trombonist, Opera Australia, 1991-2006
Owner/Craftsman, M&W Custom Trombones, LLC, Jackson, Wisconsin.
Former Bass Trombonist, Opera Australia, 1991-2006
- baBposaune
- Posts: 246
- Joined: Mon Jan 21, 2019 4:55 pm
- Location: North San Diego County
Re: This bell is absolutely nuts!
Matthew, you are so right! It was Instrument Innovations. See what you have to look forward to when you get to be my age?hornbuilder wrote: ↑Fri Mar 03, 2023 5:35 pmInstrument Innovations (Mike Olson). M/K don't make screw ring sets.baBposaune wrote: ↑Fri Mar 03, 2023 7:22 am
In this case it did make it warmer and the added weight made the sound more "together" than it was before. FYI for folks who are interested I ordered the threaded ring from M&K Drawing and Bending by calling them and they asked for the brand of instrument. Couldn't find it on their website and had been told they make them. Stephen Shires told me that the fit is very good.
Matt Varho
-
- Posts: 1423
- Joined: Wed Sep 04, 2019 2:32 pm
Re: This bell is absolutely nuts!
Thanks!!hornbuilder wrote: ↑Fri Mar 03, 2023 5:35 pmInstrument Innovations (Mike Olson). M/K don't make screw ring sets.baBposaune wrote: ↑Fri Mar 03, 2023 7:22 am
In this case it did make it warmer and the added weight made the sound more "together" than it was before. FYI for folks who are interested I ordered the threaded ring from M&K Drawing and Bending by calling them and they asked for the brand of instrument. Couldn't find it on their website and had been told they make them. Stephen Shires told me that the fit is very good.
Matt Varho
- baBposaune
- Posts: 246
- Joined: Mon Jan 21, 2019 4:55 pm
- Location: North San Diego County
Re: This bell is absolutely nuts!
INSTRUMENT INNOVATIONS!! Not M&K.baBposaune wrote: ↑Fri Mar 03, 2023 7:22 amIn this case it did make it warmer and the added weight made the sound more "together" than it was before. FYI for folks who are interested I ordered the threaded ring from M&K Drawing and Bending by calling them and they asked for the brand of instrument. Couldn't find it on their website and had been told they make them. Stephen Shires told me that the fit is very good.
Matt Varho