Small accidental discovery

Post Reply
User avatar
Posts: 89
Joined: Thu Mar 29, 2018 10:07 am
Location: New Jersey

Small accidental discovery

Post by Mv2541 » Wed Jan 09, 2019 12:24 pm

I'm sure there are plenty of people out there who use both Rath trombones and Elliott mouthpieces, so here is something for you:

If your shank is stuck to your cup, you can insert it into the bell section slide receiver and tighten the nut around the shank. Then just twist the cup a tiny bit until the seal is broken and viola! I would loosen the nut and remove the mouthpiece before completely separating the two parts but that should be fairly obvious.
Bard College Conservatory 2020
Shires- Brad Close Seamed Copper MV42 Pipe, TW47, Axial, TY, 7YLW- Greg Black 4G-5GL w/N106 rim
Rath R100- Lexan N105.C+.C+2
Shires- Bollinger Slide w/ Nickel Crook, Bollinger Axials, BG, Bollinger Bell- Rath 1 1/4
Doug Elliott
Posts: 393
Joined: Wed Mar 21, 2018 10:12 pm

Re: Small accidental discovery

Post by Doug Elliott » Wed Jan 09, 2019 2:43 pm

I think a box end wrench would be a safer discovery. You don't want to damage that part of your Rath putting unnatural stress on it.
Post Reply

Return to “Mouthpieces”