Page 1 of 1
Yamaha BASS Inner tube dimensions
Posted: Wed Jun 25, 2025 7:07 am
by WGWTR180
Does anyone own any current production Yamaha bass trombone AND a set of digital calipers who can take some measurements for me? Thanks.
Re: Yamaha BASS Inner tube dimensions
Posted: Wed Jun 25, 2025 7:15 am
by tbonesullivan
Looks like the 822G, and 835 use the same lower inner tubes, which are also the same as the 830. The upper tubes are different, and the 620 uses different types as well.
I'll see if I can measure my horns when I get home tonight.
Re: Yamaha BASS Inner tube dimensions
Posted: Wed Jun 25, 2025 10:09 am
by hornbuilder
The difference is the length the tubes are cut to, with the upper being shorter than the lower, for obvious reasons. All other measurements would be the same. So, if it happens the "upper tube" is OOS, you can buy the lower and trim it accordingly
Re: Yamaha BASS Inner tube dimensions
Posted: Fri Jun 27, 2025 7:29 am
by WGWTR180
tbonesullivan wrote: Wed Jun 25, 2025 7:15 am
Looks like the 822G, and 835 use the same lower inner tubes, which are also the same as the 830. The upper tubes are different, and the 620 uses different types as well.
I'll see if I can measure my horns when I get home tonight.
Morning. Any chance you had a moment to measure? Thanks.
Re: Yamaha BASS Inner tube dimensions
Posted: Fri Jun 27, 2025 8:42 am
by tbonesullivan
WGWTR180 wrote: Fri Jun 27, 2025 7:29 am Morning. Any chance you had a moment to measure? Thanks.
I'll try to get to it tonight. Which measurements in particular are you looking for? Just ID and OD?
Re: Yamaha BASS Inner tube dimensions
Posted: Fri Jun 27, 2025 1:14 pm
by WGWTR180
tbonesullivan wrote: Fri Jun 27, 2025 8:42 am
WGWTR180 wrote: Fri Jun 27, 2025 7:29 am Morning. Any chance you had a moment to measure? Thanks.
I'll try to get to it tonight. Which measurements in particular are you looking for? Just ID and OD?
Thank you and sorry if it's a bother. OD only of the stocking and the somewhere else on the tube. An estimated overall length of the longer/lower tube will be great as well. I'm in no rush-next week is cool. Bill
Re: Yamaha BASS Inner tube dimensions
Posted: Tue Jul 01, 2025 8:27 am
by tbonesullivan
WGWTR180 wrote: Fri Jun 27, 2025 1:14 pmThank you and sorry if it's a bother. OD only of the stocking and the somewhere else on the tube. An estimated overall length of the longer/lower tube will be great as well. I'm in no rush-next week is cool. Bill
ok! Now that the message board is back:
YBL-830
Upper Tube: 27 9/16" Long
Tube OD: 0.585"
Stocking OD: 0.598"
Lower Tube: 29 1/8" Long
Tube OD: 0.585"
Stocking OD: 0.598"
YBL-822G
Upper Tube: 27 5/8" Long
Tube OD: 0.585"
Stocking OD: 0.598"
Lower Tube: 29 1/8"
Tube OD: 0.586"
Stocking OD: 0.598"
YBL-612 RII
Upper Tube: 27 5/8" Long
Tube OD: 0.586"
Stocking OD: 0.596"
Lower Tube: 29"
Tube OD: 0.588"
Stocking OD: 0.596"
Re: Yamaha BASS Inner tube dimensions
Posted: Tue Jul 01, 2025 10:05 am
by WGWTR180
Thank you, thank you, thank you!!!