TromboneChat

[s][/s]1)      Conn 88H Elkhart, N series, with case. I know this is right as Elkhart production was phasing out. It says made in Elkhart Indiana on the bell. Had been closet kept/time capsule until two years ago when I bought it from Noah at the Brass Ark. Looks like brand new, no dents, no scratches, no wear, except a little scarring (about a quarter of an inch) from leadpipe removal. Nearly perfect. Have two leadpipes, one that looks like a Bach with the wingnut and Morse/standard trombone taper and one press fit Brass Ark 1919 8H in Rose Brass (but with Morse Taper, not Brown & Sharpe/aka Remington taper). Case in excellent shape but with a few scratches on it.  Price $[s]2300[/s]  $2200 https://www.dropbox.com/sh/vnfd471vx3goj44/AADZWHKeyeQdgIqA4_IBJtzoa?dl=0


 2)      Conn 8H Elkhart, N series, with case. I know this is right as Elkhart production was phasing out. It says made in Elkhart Indiana on the bell. Had been closet kept/time capsule until a year ago when I bought it from DJ Kennedy. Looks like brand new, no dents, no scratches no wear, except a few small dents in the back bow of the main tuning slide. Fixed original Conn leadpipe (Brown&Sharpe/aka Remington taper) with bumper springs. Case is in excellent condition, with a little scratching. Price $[s]1700[/s]  1600 https://www.dropbox.com/sh/8f5nt5yazy3eaoe/AADmyp0m2cGpD9cVBdH6eLqua?dl=0


3)      Conn 8H Elkhart, E series, has been refinished. Looks very good but not perfect. I bought it several years ago from Baltimore Brass. All original. Square coffin Conn case in excellent condition. Price $[s]1200[/s] 1100  https://www.dropbox.com/sh/8tgyoygspsco2g5/AACX_3vIw2DBh6KmtScwg4J-a?dl=0

 
4)      Conn 12H Elkhart, Coprion. I bought it from Noah at the Brass Ark. A friend stripped off the lacquer form the bell completely. When not polished it has a nice patina, when polished it is all clean shiny copper. Some small amount of connitis on tips of inner slide tubes but works very well anyway. Yamaha plastic case. $750   https://www.dropbox.com/sh/yx6i984xh2ba7w0/AACR7iH0hpzIFvt3am-HZ1v6a?dl=0
 

Conn Handslides:

1)      SOLD, [s]Conn SL2525 handslide for 8h/88h elkie or modern, lightly used, perfect condition. Three plead pipes, including two for small shank and one to take large shank mouthpiece[/s]. Price $[s]900[/s]  800  https://www.dropbox.com/sh/b7lmm612z7gif3w/AAADGvH5QD0_nhaC7AvOmdvaa?dl=0


2)      Conn SL2547 handslide for 8h/88h elkie or modern, lightly used, perfect condition.Three plead pipes, including two for small shank and one to take large shank mouthpiece. Price $[s]900[/s] 800   https://www.dropbox.com/sh/b7lmm612z7gif3w/AAADGvH5QD0_nhaC7AvOmdvaa?dl=0

As of this morning Apr3, I have reduced prices on all but one of the items in this listing by $100 each. The 88H is nearly perfect condition like brand new. Leadpipe is removeable. no bumper springs. Plays very very well. I have just decided to play something else. Both 8H's play very well also. Both of them still have the slide bumper springs. The handslides can make any 8H or 88H into a 525 horn or a 525/547 dual bore horn. They are modern Eastlake Ohio made, and fit both newer and older conns. Thank you. MJL

Interested in the .525 slide.

E-mail me at [url=mailto:[email protected]][email protected][/url]  (and put my forum name in front of 'jazz')

SL2525 SLIDE SOLD

Price Reductions Apr 6
1)      Conn 88H Elkhart, N series, with case. I know this is right as Elkhart production was phasing out. It says made in Elkhart Indiana on the bell. Had been closet kept/time capsule until two years ago when I bought it from Noah at the Brass Ark. Looks like brand new, no dents, no scratches, no wear, except a little scarring (about a quarter of an inch) from leadpipe removal. Nearly perfect. Have two leadpipes, one that looks like a Bach with the wingnut and Morse/standard trombone taper and one press fit Brass Ark 1919 8H in Rose Brass (but with Morse Taper, not Brown & Sharpe/aka Remington taper). Case in excellent shape but with a few scratches on it.  Price   [s]$2300 $2200[/s] $2100 https://www.dropbox.com/sh/vnfd471vx3goj44/AADZWHKeyeQdgIqA4_IBJtzoa?dl=0


 2)      Conn 8H Elkhart, N series, with case. I know this is right as Elkhart production was phasing out. It says made in Elkhart Indiana on the bell. Had been closet kept/time capsule until a year ago when I bought it from DJ Kennedy. Looks like brand new, no dents, no scratches no wear, except a few small dents in the back bow of the main tuning slide. Fixed original Conn leadpipe (Brown&Sharpe/aka Remington taper) with bumper springs. Case is in excellent condition, with a little scratching. Price  [s]$1700 1600[/s] $1500 https://www.dropbox.com/sh/8f5nt5yazy3eaoe/AADmyp0m2cGpD9cVBdH6eLqua?dl=0


3)      Conn 8H Elkhart, E series, has been refinished. Looks very good but not perfect. I bought it several years ago from Baltimore Brass. All original. Square coffin Conn case in excellent condition. Price [s]$1200 $1100[/s]$1000 https://www.dropbox.com/sh/8tgyoygspsco2g5/AACX_3vIw2DBh6KmtScwg4J-a?dl=0

 
4)      Conn 12H Elkhart, Coprion. I bought it from Noah at the Brass Ark. A friend stripped off the lacquer form the bell completely. When not polished it has a nice patina, when polished it is all clean shiny copper. Some small amount of connitis on tips of inner slide tubes but works very well anyway. Yamaha plastic case. [s]$750[/s]$700   https://www.dropbox.com/sh/yx6i984xh2ba7w0/AACR7iH0hpzIFvt3am-HZ1v6a?dl=0
 

Conn Handslides:

1)      SOLD, Conn SL2525 handslide for 8h/88h elkie or modern, lightly used, perfect condition. Three plead pipes, including two for small shank and one to take large shank mouthpiece. Price $900  800  https://www.dropbox.com/sh/b7lmm612z7gif3w/AAADGvH5QD0_nhaC7AvOmdvaa?dl=0


2)      Conn SL2547 handslide for 8h/88h elkie or modern, lightly used, perfect condition.Three plead pipes, including two for small shank and one to take large shank mouthpiece. Price $900 800   https://www.dropbox.com/sh/b7lmm612z7gif3w/AAADGvH5QD0_nhaC7AvOmdvaa?dl=0

Price Reductions Apr 11
1)      Conn 88H Elkhart, N series, with case. This horn is a great player in perfect condition. I just have too many horns and have bought a new shires, so the CFO says sell some horns. I know this is right as Elkhart production was phasing out. It says made in Elkhart Indiana on the bell. Had been closet kept/time capsule until two years ago when I bought it from Noah at the Brass Ark. Looks like brand new, no dents, no scratches, no wear, except a little scarring (about a quarter of an inch) from leadpipe removal. Nearly perfect. Have two leadpipes, one that looks like a Bach with the wingnut and Morse/standard trombone taper and one press fit Brass Ark 1919 8H in Rose Brass (but with Morse Taper, not Brown & Sharpe/aka Remington taper). No bumper springs. Case in excellent shape but with a few scratches on it.  Price   [s]$2300 $2200[/s] $[s]2100[/s] now $2000 https://www.dropbox.com/sh/vnfd471vx3goj44/AADZWHKeyeQdgIqA4_IBJtzoa?dl=0


 2)      Conn 8H Elkhart, N series, with case. This is a great player. I know this is right as Elkhart production was phasing out. It says made in Elkhart Indiana on the bell. Had been closet kept/time capsule until a year ago when I bought it from DJ Kennedy. Looks like brand new, no dents, no scratches no wear, except a few small dents in the back bow of the main tuning slide. Otherwise perfect. Fixed original Conn leadpipe (Brown&Sharpe/aka Remington taper) with bumper springs. Case is in excellent condition, with a little scratching. Price  [s]$1700[/s] [s]1600[/s] now $1500 https://www.dropbox.com/sh/8f5nt5yazy3eaoe/AADmyp0m2cGpD9cVBdH6eLqua?dl=0


3)      Conn 8H Elkhart, E series, has been refinished. Looks very good but not perfect. I bought it several years ago from Baltimore Brass. All original. Square coffin Conn case in excellent condition. Price [s]$1200 $1100[/s]$1000 https://www.dropbox.com/sh/8tgyoygspsco2g5/AACX_3vIw2DBh6KmtScwg4J-a?dl=0

 
4)      Conn 12H Elkhart, Coprion. I bought it from Noah at the Brass Ark. A friend stripped off the lacquer form the bell completely. When not polished it has a nice patina, when polished it is all clean shiny copper. Some small amount of connitis on tips of inner slide tubes but works very well anyway. Yamaha plastic case. $750[s]$700[/s] now $650  https://www.dropbox.com/sh/yx6i984xh2ba7w0/AACR7iH0hpzIFvt3am-HZ1v6a?dl=0
 

Conn Handslides:

1)      SOLD, Conn SL2525 handslide  https://www.dropbox.com/sh/b7lmm612z7gif3w/AAADGvH5QD0_nhaC7AvOmdvaa?dl=0


2)      Conn SL2547 handslide for 8h/88h elkie or modern, lightly used, perfect condition.Three plead pipes, including two for small shank and one to take large shank mouthpiece. Price $900 [s]800[/s]   now $700 https://www.dropbox.com/sh/b7lmm612z7gif3w/AAADGvH5QD0_nhaC7AvOmdvaa?dl=0
 



As of this morning Apr 11. The 88H is nearly perfect condition like brand new. Leadpipe is removeable. no bumper springs. Plays very very well. I have just decided to play something else. Both 8H's play very well also. Both of them still have the slide bumper springs. The SL2547 handslide can make any 8H or 88H into a 525/547 dual bore horn. They are modern Eastlake Ohio made, and fit both newer and older conns. Thank you. MJL
 

Message sent.

updated Apr 20
1)      SOLD. Conn 88H Elkhart, N series, with case.


 2)      Conn 8H Elkhart, N series, with case. This is a great player. I know this is right as Elkhart production was phasing out. It says made in Elkhart Indiana on the bell. Had been closet kept/time capsule until a year ago when I bought it from DJ Kennedy. Looks like brand new, no dents, no scratches no wear, except a few small dents in the back bow of the main tuning slide. Otherwise perfect. Fixed original Conn leadpipe (Brown&Sharpe/aka Remington taper) with bumper springs. Case is in excellent condition, with a little scratching. Price  [s]$1700 1600 $1500[/s] now $1400 https://www.dropbox.com/sh/8f5nt5yazy3eaoe/AADmyp0m2cGpD9cVBdH6eLqua?dl=0


3)      Conn 8H Elkhart, E series, has been refinished. Looks very good but not perfect. I bought it several years ago from Baltimore Brass. All original. Square coffin Conn case in excellent condition. Price [s]$1200 $1100$1000 [/s] now $900 https://www.dropbox.com/sh/8tgyoygspsco2g5/AACX_3vIw2DBh6KmtScwg4J-a?dl=0

 
4)      Conn 12H Elkhart, Coprion. I bought it from Noah at the Brass Ark. A friend stripped off the lacquer form the bell completely. When not polished it has a nice patina, when polished it is all clean shiny copper. Some small amount of connitis on tips of inner slide tubes but works very well anyway. Yamaha plastic case. [s]$750$700$650 [/s] now $600 https://www.dropbox.com/sh/yx6i984xh2ba7w0/AACR7iH0hpzIFvt3am-HZ1v6a?dl=0
 

Conn Handslides:

1)      SOLD, Conn SL2525 handslide 


2)      Conn SL2547 handslide for 8h/88h elkie or modern, lightly used, perfect condition.Three plead pipes, including two for small shank and one to take large shank mouthpiece. Price [s]$900 800 $700 [/s] $650 https://www.dropbox.com/sh/b7lmm612z7gif3w/AAADGvH5QD0_nhaC7AvOmdvaa?dl=0
 



Both 8H's play very well. Both of them still have the slide bumper springs. The SL2547 handslide can make any 8H or 88H into a 525/547 dual bore horn. They are modern Eastlake Ohio made, and fit both newer and older conns. Thank you. MJL