Page 1 of 1
Modular trombone compatibility
Posted: Thu Sep 07, 2017 8:56 am
by ttf_anonymous
I've seen a few people mention having a shires or Yamaha bell with an edwards valve section etc. Are all the modular systems compatible with each other? What works with what?
Modular trombone compatibility
Posted: Thu Sep 07, 2017 9:02 am
by ttf_BGuttman
The short answer is no. Sometimes you can make modifications to one part or another (for example, putting a Shires tenon on a Bach slide) and sometimes getting them to work involves a lot of expensive custom work.
Sometimes you get lucky and one part mates with another. But don't hold your breath.
Modular trombone compatibility
Posted: Thu Sep 07, 2017 9:18 am
by ttf_tbathras
They are not out-of-the-box interchangeable. Mixing parts that are not designed for each other is a big science experiment, typically yielding something that doesn't work. Some times you get lucky and it might pan out, but that seems to be more of the exception than the rule.
Modular trombone compatibility
Posted: Thu Sep 07, 2017 11:43 am
by ttf_elmsandr
Quote from: burton300 on Yesterday at 08:56 AMI've seen a few people mention having a shires or Yamaha bell with an edwards valve section etc. Are all the modular systems compatible with each other? What works with what?
Pretty much only some slides work with some hand slide receivers... If you are talking flare to somebody else's tuning slide or valve section, every one that is made to match has been adjusted in the field somehow. For example, Bach and Edwards slides 'fit'. But Bach slides are longer. This can usually be made up in the tuning slide or extended positions, but YMMV. Shires receivers will 'fit' a Bach or Edwards slide, but the threads are different. Again there are length issues. It is work to make a Frankenstein horn. Sometimes it is worth it.
Note: I own a Bach horn that I have fitted to a Shires valve section. And a Bach horn that I play with and Edwards slide. And a Holton Flare, Bach Tuning slide, and Shires valve section. That last one was not intentional, it was just the parts I had handy. Pretty much none of these items will now be happily mated to stock items. Well, except the Edwards slide, there have been no tweaks to that.
Cheers,
Andy
Modular trombone compatibility
Posted: Thu Sep 07, 2017 5:09 pm
by ttf_burton300
This seems much more in line with what makes sense to me. Thanks for the replies everyone.
Cheers
Modular trombone compatibility
Posted: Thu Sep 07, 2017 5:09 pm
by ttf_burton300
This seems much more in line with what makes sense to me. Thanks for the replies everyone.
Cheers