Kanstul
-
- Posts: 2847
- Joined: Fri Mar 23, 2018 7:31 am
Re: Kanstul
I own one Kanstul - the 1662i. I think in the long run, I'll decide that I really love the instrument, but I keep going back and forth about it. Mechanically, it's a great instrument, although you really have to keep after the slide to keep it feeling good. When it gets bad, it goes down hill fast.
Everytime I bring in a different instrument to either big band or quartet or orchestra, people miss the sound of that 1662i. Its just really nice sound on and under the staff. It works above the staff, but the feedback behind the bell isn't maybe the best.
I've played/briefly owned a 760 for a while, and to me it was frighteningly bright. I'm not afraid of some brightness, but this was bright.
I've always wanted a 1608. If someone has one you'd like to unload for a trade, I'd love to get one of those (8h equivalent with TIS).
Everytime I bring in a different instrument to either big band or quartet or orchestra, people miss the sound of that 1662i. Its just really nice sound on and under the staff. It works above the staff, but the feedback behind the bell isn't maybe the best.
I've played/briefly owned a 760 for a while, and to me it was frighteningly bright. I'm not afraid of some brightness, but this was bright.
I've always wanted a 1608. If someone has one you'd like to unload for a trade, I'd love to get one of those (8h equivalent with TIS).
- Molefsky
- Posts: 138
- Joined: Tue Aug 07, 2018 6:24 pm
- Location: US
- Contact:
Re: Kanstul
A very inside person told me this morning that they're hammering something out.
M. Olefsky
Calle Soul Salsa
Arkansas Musicworks Brass Band
Calle Soul Salsa
Arkansas Musicworks Brass Band
-
- Posts: 1430
- Joined: Sun Apr 29, 2018 10:43 am
- Location: Sweden
Re: Kanstul
It projects like mad and as a consequence the feedback behind the bell can fool you. I have the same experience with my dependant 1662. The feedback is not bad behind the bell but you can be triicked to think you are not heard when people in the room hear you loud and clear. The only horn that beats this horn is my Holton 169.hyperbolica wrote: ↑Sun Feb 17, 2019 4:06 pm Everytime I bring in a different instrument to either big band or quartet or orchestra, people miss the sound of that 1662i. Its just really nice sound on and under the staff. It works above the staff, but the feedback behind the bell isn't maybe the best.
I don't think it is bright. The dual bore makes it a little to mellow for lead. I think 3rd in a big band could be perfect or as a cheap substitute for a Bach 36I've played/briefly owned a 760 for a while, and to me it was frighteningly bright. I'm not afraid of some brightness, but this was bright.
/Tom
- baBposaune
- Posts: 203
- Joined: Mon Jan 21, 2019 4:55 pm
- Location: North San Diego County
Re: Kanstul
Warburton is looking at buying the Kanstul factory in Anaheim. If that comes to pass it would be a good thing for the trumpet, trombone and marching brass community.
-
- Posts: 3481
- Joined: Fri Mar 23, 2018 9:54 pm
- Location: California
Re: Kanstul
To move the Kanstul manufacturing equipment to Florida?baBposaune wrote: ↑Thu Feb 21, 2019 7:44 am Warburton is looking at buying the Kanstul factory in Anaheim.
![Don't Know :idk:](./images/smilies/dontknow.gif)
- JohnL
- Posts: 1595
- Joined: Fri Mar 23, 2018 9:01 am
- Contact:
Re: Kanstul
I'd heard whispers about "someone from Florida" and thought it might be Warburton, but was not able to verify the rumor.baBposaune wrote: ↑Thu Feb 21, 2019 7:44 am Warburton is looking at buying the Kanstul factory in Anaheim. If that comes to pass it would be a good thing for the trumpet, trombone and marching brass community.
I would expect that they will pack everything up and ship it to the Sunshine State.
-
- Posts: 2847
- Joined: Fri Mar 23, 2018 7:31 am
- JohnL
- Posts: 1595
- Joined: Fri Mar 23, 2018 9:01 am
- Contact:
Re: Kanstul
Labor, too. And energy. Insurance. Taxes. You get the picture.hyperbolica wrote: ↑Thu Feb 21, 2019 12:16 pmEverything would be a lot cheaper, especially real estate.
But beyond the cost, I can't see trying to run a factory in Anaheim, CA from Titusville, FL.
-
- Posts: 968
- Joined: Tue May 08, 2018 2:05 am
- Location: Los Angeles, California
Re: Kanstul
Any updates? I saw mention on facebook that Kanstul is going to be demoing at Trombone Day at Mount Sac??? Are they up and running again? Or just burning through the rest of their inventory?
Rath R1 2000s, Elliott XT
Bach 42 1974, Elliott XT
Holton 169 1965, Elliott LB
Minick Bass Trombone 1980s, Elliott LB
Bach 42 1974, Elliott XT
Holton 169 1965, Elliott LB
Minick Bass Trombone 1980s, Elliott LB
- JohnL
- Posts: 1595
- Joined: Fri Mar 23, 2018 9:01 am
- Contact:
Re: Kanstul
Was that a post by Kanstul or someone else?
Last edited by JohnL on Fri Mar 01, 2019 10:15 am, edited 1 time in total.
-
- Posts: 3481
- Joined: Fri Mar 23, 2018 9:54 pm
- Location: California
Re: Kanstul
I guess we'll know for sure on Saturday (Southern California Trombone Day).
![Don't Know :idk:](./images/smilies/dontknow.gif)
No good reason why Kanstul shouldn't be selling off their inventory - unless all the sales personnel have also been laid off!
-
- Posts: 968
- Joined: Tue May 08, 2018 2:05 am
- Location: Los Angeles, California
Re: Kanstul
Horn Guys posted it on facebook. They worded the post in a way that made it seem like Kanstul would be there.
Rath R1 2000s, Elliott XT
Bach 42 1974, Elliott XT
Holton 169 1965, Elliott LB
Minick Bass Trombone 1980s, Elliott LB
Bach 42 1974, Elliott XT
Holton 169 1965, Elliott LB
Minick Bass Trombone 1980s, Elliott LB
- BflatBass
- Posts: 171
- Joined: Thu Mar 22, 2018 10:44 pm
- Location: Kelso WA
Re: Kanstul
The Kanstul Musical Instruments page on Facebook just posted something about their appearance at the SoCal Trombone Day about 11 to 12 hrs ago.
This is what it said along with some pics:
"SoCal Trombone Day last-minute entry. Was a good day of clinics, concerts and meeting local players. Special thanks to Len Wicks, the MSAC music department and the other local dealers who made the day possible!"
Why would they do this if they are going out of business? I could be wrong but it just didn't seem like they were trying to sell off remaining inventory. The pics had a lot of horns and cases on display.
Just go to Facebook and type in Kanstul Musical Instruments, Inc in the search field.
Robert
This is what it said along with some pics:
"SoCal Trombone Day last-minute entry. Was a good day of clinics, concerts and meeting local players. Special thanks to Len Wicks, the MSAC music department and the other local dealers who made the day possible!"
Why would they do this if they are going out of business? I could be wrong but it just didn't seem like they were trying to sell off remaining inventory. The pics had a lot of horns and cases on display.
Just go to Facebook and type in Kanstul Musical Instruments, Inc in the search field.
Robert
I dream of the day that the world will be healthy enough that I can play in a live ensemble again.
- JohnL
- Posts: 1595
- Joined: Fri Mar 23, 2018 9:01 am
- Contact:
Re: Kanstul
Not all of those horns are Kanstul's. The long table with cases, accessories, and trombones belonged to another vendor (Bertrand's Music). The shorter table next to the Kanstul banner (four trombones on the table plus the alto on the floor) was the Kanstul display. They also had a list of cosmetically challenged horns they were looking to move out (those horns were not on display).
- BflatBass
- Posts: 171
- Joined: Thu Mar 22, 2018 10:44 pm
- Location: Kelso WA
Re: Kanstul
Ok, that make more sense. I misinterpreted the photos.
I dream of the day that the world will be healthy enough that I can play in a live ensemble again.
-
- Posts: 199
- Joined: Mon Jul 16, 2018 9:11 am
- Location: Deep in the Ozarks of Missouri
Re: Kanstul
----
Kanstul is having a blowout sale. Both small and large bore tenors, not all models, as well as euphs, tubas, bass trumpet...the info I received says to contact them by email only, no calls.
www.kanstul.com
===
Kanstul is having a blowout sale. Both small and large bore tenors, not all models, as well as euphs, tubas, bass trumpet...the info I received says to contact them by email only, no calls.
www.kanstul.com
===
Lawler model 1
Lawler model 2
Lawler Model 3
Williams 6
Williams L
Kanstul 1606
Conn 71H
Lawler model 2
Lawler Model 3
Williams 6
Williams L
Kanstul 1606
Conn 71H
- Nhtrombone
- Posts: 57
- Joined: Mon Mar 26, 2018 3:31 am
Re: Kanstul
Is there a way to see these blowout prices?
- Trav1s
- Posts: 394
- Joined: Thu Jul 26, 2018 9:06 am
- Location: Central Ohio
Re: Kanstul
The blowout stuff is on their Facebook page.
Travis B.
Trombone player since 1986 and Conn-vert since 2006
1961 24H - LT101/C+/D2
1969 79H - LT102/D/D4
1972 80H - Unicorn
Benge 165F LT102/F+/G8
Trombone player since 1986 and Conn-vert since 2006
1961 24H - LT101/C+/D2
1969 79H - LT102/D/D4
1972 80H - Unicorn
Benge 165F LT102/F+/G8
- Nhtrombone
- Posts: 57
- Joined: Mon Mar 26, 2018 3:31 am
Re: Kanstul
Not trombones yet ![Sad :-(](./images/smilies/icon_e_sad.gif)
![Sad :-(](./images/smilies/icon_e_sad.gif)
-
- Posts: 199
- Joined: Mon Jul 16, 2018 9:11 am
- Location: Deep in the Ozarks of Missouri
Re: Kanstul
see below
Last edited by TheSheriff on Sat Mar 09, 2019 1:54 pm, edited 1 time in total.
Lawler model 1
Lawler model 2
Lawler Model 3
Williams 6
Williams L
Kanstul 1606
Conn 71H
Lawler model 2
Lawler Model 3
Williams 6
Williams L
Kanstul 1606
Conn 71H
-
- Posts: 199
- Joined: Mon Jul 16, 2018 9:11 am
- Location: Deep in the Ozarks of Missouri
Re: Kanstul
TheSheriff wrote: ↑Sat Mar 09, 2019 1:52 pm ---
www.kanstul.com/wp-content/uploads/2019 ... celist.pdf
===
Lawler model 1
Lawler model 2
Lawler Model 3
Williams 6
Williams L
Kanstul 1606
Conn 71H
Lawler model 2
Lawler Model 3
Williams 6
Williams L
Kanstul 1606
Conn 71H
-
- Posts: 968
- Joined: Tue May 08, 2018 2:05 am
- Location: Los Angeles, California
Re: Kanstul
BAC just posted something on facebook... looks like BAC bought up a ton of parts and tooling from Kanstul.
Mike never said what he actually bought just said "tooling and parts" so I'm not sure if that means he effectively bought Kanstul and has the authority to produce Kanstul horns or if they just bought manufacturing stuff.
Wonder if he got all the bell and leadpipe mandrels? He does point at some in the video...
Mike never said what he actually bought just said "tooling and parts" so I'm not sure if that means he effectively bought Kanstul and has the authority to produce Kanstul horns or if they just bought manufacturing stuff.
Wonder if he got all the bell and leadpipe mandrels? He does point at some in the video...
Rath R1 2000s, Elliott XT
Bach 42 1974, Elliott XT
Holton 169 1965, Elliott LB
Minick Bass Trombone 1980s, Elliott LB
Bach 42 1974, Elliott XT
Holton 169 1965, Elliott LB
Minick Bass Trombone 1980s, Elliott LB
- JohnL
- Posts: 1595
- Joined: Fri Mar 23, 2018 9:01 am
- Contact:
Re: Kanstul
Just watched the video. You'll notice that Mike never actually said the name "Kanstul"; I expect that would indicate that he bought hardware but not the name.
Hopefully Mike will be able to offer jobs to some of the former Kanstul guys. I know of at least one who interviewed with him after the shutdown.
-
- Posts: 968
- Joined: Tue May 08, 2018 2:05 am
- Location: Los Angeles, California
Re: Kanstul
I noticed that. I will say I'm happy BAC was the one to get the tooling and parts. Just based off of how they've been using former Williams and Olds tooling I think they will be able to do some cool things with the things they've gotten.JohnL wrote: ↑Thu May 16, 2019 4:32 pm Just watched the video. You'll notice that Mike never actually said the name "Kanstul"; I expect that would indicate that he bought hardware but not the name.
Hopefully Mike will be able to offer jobs to some of the former Kanstul guys. I know of at least one who interviewed with him after the shutdown.
Imagine them being able to readily sell parts like reproduction 62H J bends, all of the various leadpipes and all the oodles of odd tubing that Kanstul made. I'm excited about the possibilities!
I am... slightly irked he hasn't just outright said BAC did or did not buy the Kanstul name and everything attached to it and/or that BAC ONLY bought "X" tooling and parts. He posted something else on Instagram, which like the video on facebook mildly implies BAC bought the company without him outright saying he did.
Maybe he did make it clear somewhere else... if he does outright say it someone please post that here! I'm interested to hear what actually happened in the deal and the status on Kanstul!
Rath R1 2000s, Elliott XT
Bach 42 1974, Elliott XT
Holton 169 1965, Elliott LB
Minick Bass Trombone 1980s, Elliott LB
Bach 42 1974, Elliott XT
Holton 169 1965, Elliott LB
Minick Bass Trombone 1980s, Elliott LB
-
- Posts: 438
- Joined: Sun Feb 24, 2019 5:34 am
- Location: Long Island, NY
- Contact:
Re: Kanstul
Mike did not buy the name, but he bought all the tooling. All of it. A lot of stuff that hasnt neen in production for a long time, not original to Kanstul is included, so he is going to potentially resurrect some designs not seen in a while, with some BAC originality of course. I'm not sure what the plans are on tubas, but theres in there as well.
Personally i find this very exciting, and am eager to see what comes of it. Moving all of that is going to be a logistical nightmare!
Personally i find this very exciting, and am eager to see what comes of it. Moving all of that is going to be a logistical nightmare!
Check out our new bass trombone doubling mouthpieces: https://www.librassco.com/broadway-bass
-
- Posts: 968
- Joined: Tue May 08, 2018 2:05 am
- Location: Los Angeles, California
Re: Kanstul
That's really awesome!!!LIBrassCo wrote: ↑Thu May 16, 2019 8:32 pm Mike did not buy the name, but he bought all the tooling. All of it. A lot of stuff that hasnt neen in production for a long time, not original to Kanstul is included, so he is going to potentially resurrect some designs not seen in a while, with some BAC originality of course. I'm not sure what the plans are on tubas, but theres in there as well.
Personally i find this very exciting, and am eager to see what comes of it. Moving all of that is going to be a logistical nightmare!
Like I said in my other post I'm excited to see what they cook up. While I might not like all of their designs I do appreciate that they are willing to try new things and resurrect old things!
Rath R1 2000s, Elliott XT
Bach 42 1974, Elliott XT
Holton 169 1965, Elliott LB
Minick Bass Trombone 1980s, Elliott LB
Bach 42 1974, Elliott XT
Holton 169 1965, Elliott LB
Minick Bass Trombone 1980s, Elliott LB
- JohnL
- Posts: 1595
- Joined: Fri Mar 23, 2018 9:01 am
- Contact:
Re: Kanstul
Give it a few days. Maybe they're still hammering out the details. Maybe the name is specifically excluded from the agreement, so Mike can't use it in any of his promotional materials.mrdeacon wrote: ↑Thu May 16, 2019 8:10 pmI am... slightly irked he hasn't just outright said BAC did or did not buy the Kanstul name and everything attached to it and/or that BAC ONLY bought "X" tooling and parts. He posted something else on Instagram, which like the video on facebook mildly implies BAC bought the company without him outright saying he did.
Maybe he did make it clear somewhere else... if he does outright say it someone please post that here! I'm interested to hear what actually happened in the deal and the status on Kanstul!
Looking at the video again, at around the 1:00 mark:
Seems like he's trying to think of a way to make it clear that he's talking about Kanstul without actually saying the name. I'm actually kinda impressed - he got through about 11 minutes of live stream without slipping up and saying the "K" word.There's a lot of tradition in the room I'm standing in right now. A lot of history. There is things like bins and parts and tools that were in the original Burbank Benge factory and the F. E. Olds company and factory and um and another factory...I'm in Anaheim, California
-
- Posts: 227
- Joined: Fri Mar 23, 2018 1:01 am
-
- Posts: 46
- Joined: Mon May 28, 2018 4:21 am
Re: Kanstul
This is his reply to my comment on his video:
"We purchased all of the tooling, jigs, fixtures. The guy who taught me how to make bells, John Duda, is also the guy that taught Arnufo to make bells at Kanstul. And now John is working as our Foreman to help pass the torch! Now this! We’re committed to gradually bringing back as many models as possible and preserving the integrity of ‘how they were made’. Something often overlooked or completely ignored in past situations like this!!"
"We purchased all of the tooling, jigs, fixtures. The guy who taught me how to make bells, John Duda, is also the guy that taught Arnufo to make bells at Kanstul. And now John is working as our Foreman to help pass the torch! Now this! We’re committed to gradually bringing back as many models as possible and preserving the integrity of ‘how they were made’. Something often overlooked or completely ignored in past situations like this!!"
-
- Posts: 272
- Joined: Mon Mar 26, 2018 3:14 pm
- Location: Fairfax Station, VA
Re: Kanstul
Mr. Corrigan certainly is enthusiastic and he obviously loves what he does. And he seems to be able to do some nice work at times. My problem with him is that he's also a compulsive liar: things are always "on order" or they "went out last week" or "just waiting on one more part". I also had an unfortunate incident where I traded an instrument to him which I later found out he sold to one of his employees for a sweetheart deal and pressured me to accept the low price for. Not ethical. I've heard the same thing from many other players as well as from a bunch of his former employers and coworkers. And while I'm sure he can do nice repair work, the piece I sent to him was some of the most shoddy ugly half-ass repair work I've ever seen, and I was charged top dollar for it. I feel like he lets his ambition get ahead of him. Hopefully now that his operation has grown he's been able to add more people who can keep him focused and honest. But, it's hard for me to see this as anything but a very bad thing for the Kanstul legacy.
Last edited by bbocaner on Fri May 17, 2019 2:24 pm, edited 1 time in total.
-
- Posts: 721
- Joined: Thu Mar 22, 2018 7:40 am
- Location: My Dungeon of Hell....Actually Texas
- Contact:
Re: Kanstul
I'm hoping something like a buffing machine or draw table will fall off the trailer as he's passing through Dallas.....LIBrassCo wrote: ↑Thu May 16, 2019 8:32 pm Mike did not buy the name, but he bought all the tooling. All of it. A lot of stuff that hasnt neen in production for a long time, not original to Kanstul is included, so he is going to potentially resurrect some designs not seen in a while, with some BAC originality of course. I'm not sure what the plans are on tubas, but theres in there as well.
Personally i find this very exciting, and am eager to see what comes of it. Moving all of that is going to be a logistical nightmare!
Yes it's interesting/exciting that this stuff will still be available, but then again, the things that have disappeared or are no longer available can be attributed to lack of interest from the playing public, so unless there'a sizeable group of players willing to shell out some cash, we might or might not again see some of the older designs.
Eric
Eric Edwards
Professional Instrument Repair
972.795.5784
"If you must choose between two evils, choose the one you haven't tried yet."
"Rather fail with honor than succeed by fraud." -Sophocles
Professional Instrument Repair
972.795.5784
"If you must choose between two evils, choose the one you haven't tried yet."
"Rather fail with honor than succeed by fraud." -Sophocles
- Burgerbob
- Posts: 4649
- Joined: Mon Apr 23, 2018 8:10 pm
- Location: LA
- Contact:
Re: Kanstul
He certainly has his fan club. I'm a little apprehensive at how this will turn out as well.
Aidan Ritchie, LA area player and teacher
-
- Posts: 272
- Joined: Mon Mar 26, 2018 3:14 pm
- Location: Fairfax Station, VA
Re: Kanstul
From what I can surmise, most of those people in his fan club have never actually tried to do business with him.
- JohnL
- Posts: 1595
- Joined: Fri Mar 23, 2018 9:01 am
- Contact:
Re: Kanstul
You want I should sneak in and loosen a tie-down or two before they roll out of Anaheim?
![Wink :wink:](./images/smilies/icon_e_wink.gif)
In all seriousness, I don't think that sort of thing was included in what Mike acquired. It's "tooling, jigs, and fixtures". No mention of machinery. Those big items would be expensive to transport, particularly if they are large and/or heavy enough to require a specialty mover.
If I were Mike, I would try to fast track the trumpets, with special emphasis on getting the parts Kanstul made for third parties back in production as quickly as possible. The longer that stuff is out of production, the more likely those folks are to either find a new source or go out of business. If he's able to help them out, that'll create some significant goodwill toward him in the industry. Win/Win.
Last edited by JohnL on Fri May 17, 2019 5:01 pm, edited 1 time in total.
-
- Posts: 968
- Joined: Tue May 08, 2018 2:05 am
- Location: Los Angeles, California
Re: Kanstul
There was also a comment he made somewhere also on instagram last night where he outright said that they bought the tooling and parts but not the name.JonTheCadet wrote: ↑Fri May 17, 2019 12:11 pm This is his reply to my comment on his video:
"We purchased all of the tooling, jigs, fixtures. The guy who taught me how to make bells, John Duda, is also the guy that taught Arnufo to make bells at Kanstul. And now John is working as our Foreman to help pass the torch! Now this! We’re committed to gradually bringing back as many models as possible and preserving the integrity of ‘how they were made’. Something often overlooked or completely ignored in past situations like this!!"
Happy we've got confirmation on that now from both primary and secondary sources.
Rath R1 2000s, Elliott XT
Bach 42 1974, Elliott XT
Holton 169 1965, Elliott LB
Minick Bass Trombone 1980s, Elliott LB
Bach 42 1974, Elliott XT
Holton 169 1965, Elliott LB
Minick Bass Trombone 1980s, Elliott LB
-
- Posts: 968
- Joined: Tue May 08, 2018 2:05 am
- Location: Los Angeles, California
Re: Kanstul
Good point! That was a large chunk of Kanstuls business. Someone has to fill the gap they left!JohnL wrote: ↑Fri May 17, 2019 4:59 pm In all seriousness, I don't think that sort of thing was included in what Mike acquired. It's "tooling, jigs, and fixtures". No mention of machinery. Those big items would be expensive to transport, particularly if they are large and/or heavy enough to require a specialty mover.
If I were Mike, I would try to fast track the trumpets, with special emphasis on getting the parts Kanstul made for third parties back in production as quickly as possible. The longer that stuff is out of production, the more likely those folks are to either find a new source or go out of business. If he's able to help them out, that'll create some significant goodwill toward him in the industry. Win/Win.
Rath R1 2000s, Elliott XT
Bach 42 1974, Elliott XT
Holton 169 1965, Elliott LB
Minick Bass Trombone 1980s, Elliott LB
Bach 42 1974, Elliott XT
Holton 169 1965, Elliott LB
Minick Bass Trombone 1980s, Elliott LB
- JohnL
- Posts: 1595
- Joined: Fri Mar 23, 2018 9:01 am
- Contact:
Re: Kanstul
Did the post specifically mention "parts"? If so, that adds a new dimension beyond the tooling, jigs, and fixtures. It takes a while to start making money from tooling, but parts you can start selling as soon as you get everything organized. It won't necessarily be a lot of revenue, but it's at least some return on the investment.
Once again putting myself in Mike's shoes, the first trombone stuff I'd try to get into production would be the leadpipes. Lots of guys and gals playing Kanstul pipes in other makes of horn. If he's true to the spirit of Kanstul, he'll call them the Anaheim (or maybe "OC") leadpipes. He might even be able to use most of the old Kanstul designations (depends on their trademark status).
Given the never-ending discussions of tenor/bass "tweener" horns we have here, maybe he can look into that - especially if he's got the Olds S-20/S-23 bell mandrel. Mate that up with a dual-bore .547"/.562" slide and a good double valve set and you might have a winner (Mike, if you're reading this - I'd be very interested in buying one myself).
-
- Posts: 2847
- Joined: Fri Mar 23, 2018 7:31 am
Re: Kanstul
The S20 already had a 555/565 TIS slide. Two things I'd do to modernize that horn - lighten the slide somewhat (maybe with the Kanstul TIS mechanism) and put a double valve on it. In fact, resurrecting the 9" P24g with the CR valves and levers and the dual bore slide option might be a more marketable move...
- JohnL
- Posts: 1595
- Joined: Fri Mar 23, 2018 9:01 am
- Contact:
Re: Kanstul
And no one currently makes slides tubes in .554" or .565"; to have any hope of getting the horn made, it would be necessary to use as many off-the-shelf parts as possible - thus a .547"/.562" slide. A lighter slide would be a must - but would you even want to make it as a TIS, at least to start with? Replacing the J-crook with a tuning slide and a neckpipe might result in a more marketable design.hyperbolica wrote: ↑Fri May 17, 2019 9:50 pmThe S20 already had a 555/565 TIS slide. Two things I'd do to modernize that horn - lighten the slide somewhat (maybe with the Kanstul TIS mechanism) and put a double valve on it.
Except the P-24G is too big to be a good tweener. It's got the same size flare (9") as an S-20, but that's where the resemblance ends; it's about .050" bigger at the tail end of the bell than the S-20 bell at the same point, and the throat is much larger (based on mute insertion).In fact, resurrecting the 9" P24g with the CR valves and levers and the dual bore slide option might be a more marketable move...
As an aside, I know for certain that Kanstul made at least one dependent-double symphony-bore tenor - but Zig used their regular symphonic tenor bell, while the guy it was built for had envisioned something more like a King 1480/5B bell (which would have required new tooling). It was never quite what he'd hoped for.
-
- Posts: 438
- Joined: Sun Feb 24, 2019 5:34 am
- Location: Long Island, NY
- Contact:
Re: Kanstul
Its a little off topic, but I'm doing a "baby bass" for myself. And if anyones interested, a combination that works is a holton 9" bell, with a king 7b tuning tuning crook, two .562 valves (im using rotax) and a 547-562 slide. I am undecided on the leadpipe, but i may end up with either none, or a very short one i will machine out of billet titanium (really into titanium these days). The throat of the bell is more tenorish, but the tapers are perfect. If you want it to have a deeper sound, just go .562 slide and .593 valves. Im going with adjusting the leadpipe (or lack thereof) to get what i am looking for.
Check out our new bass trombone doubling mouthpieces: https://www.librassco.com/broadway-bass
-
- Posts: 194
- Joined: Fri Mar 23, 2018 7:36 am
Re: Kanstul
Mike Corrigan posted a video on Facebook. He's obviously at the Kanstul factory, although he never says the name. I'm assuming this is for legal reasons. Apparently B.A.C. is acquiring all the tooling. Is anyone able to elaborate?
- greenbean
- Posts: 1796
- Joined: Fri Mar 23, 2018 6:14 pm
- Location: San Francisco
Re: Kanstul
What does this have to do with Kanstul?...LIBrassCo wrote: ↑Sat May 18, 2019 2:30 am Its a little off topic, but I'm doing a "baby bass" for myself. And if anyones interested, a combination that works is a holton 9" bell, with a king 7b tuning tuning crook, two .562 valves (im using rotax) and a 547-562 slide. I am undecided on the leadpipe, but i may end up with either none, or a very short one i will machine out of billet titanium (really into titanium these days). The throat of the bell is more tenorish, but the tapers are perfect. If you want it to have a deeper sound, just go .562 slide and .593 valves. Im going with adjusting the leadpipe (or lack thereof) to get what i am looking for.
Tom in San Francisco
Currently playing...
Bach Corp 16M
Many French horns
Currently playing...
Bach Corp 16M
Many French horns
-
- Posts: 227
- Joined: Fri Mar 23, 2018 1:01 am
-
- Posts: 239
- Joined: Tue Apr 24, 2018 7:30 pm
- Location: New York City
- Contact:
Re: Kanstul
Wait, so John Duda is now at BAC? Can anyone confirm this?
-
- Posts: 227
- Joined: Fri Mar 23, 2018 1:01 am
-
- Posts: 69
- Joined: Sun Jul 22, 2018 12:18 pm
Re: Kanstul
Regarding whereabouts of John Duda:
http://www.calicchio.com/
http://www.calicchio.com/
-
- Posts: 438
- Joined: Sun Feb 24, 2019 5:34 am
- Location: Long Island, NY
- Contact:
Re: Kanstul
I was answering John's tweener horn post is all.
Check out our new bass trombone doubling mouthpieces: https://www.librassco.com/broadway-bass
- Cotboneman
- Posts: 199
- Joined: Fri Jul 27, 2018 4:16 pm
- Location: Tucson, AZ
- Contact:
Re: Kanstul
I just saw the video, and the description now says that B.A.C. is acquiring the manufacturing content from Kanstul and will be relocating it to Kansas City. He only mentions FE Olds in the video itself, possibly for legal reasons until the deal is finalized, but the video description does state Kanstul.LarryPrestonRoberson wrote: ↑Sat May 18, 2019 9:01 am Mike Corrigan posted a video on Facebook. He's obviously at the Kanstul factory, although he never says the name. I'm assuming this is for legal reasons. Apparently B.A.C. is acquiring all the tooling. Is anyone able to elaborate?
-
- Posts: 2847
- Joined: Fri Mar 23, 2018 7:31 am
Re: Kanstul
I have mixed feelings about this deal. On one hand it's great that we might have another shot at Kanstul and Olds horns. Kanstul stuff was very affordable, and kind of minimalist design . On the other hand BAC has a reputation for severely overpriced and kind of ornate stuff.
-
- Posts: 438
- Joined: Sun Feb 24, 2019 5:34 am
- Location: Long Island, NY
- Contact:
Re: Kanstul
I feel obligated for accuracy purposes to address this. Will BAC make you a one of a kind, over the top horn? Hell yea they will. But they will also make you an instrument in line with conventional standards? If that's what you want, yes, as it's solely up to the customer. As far as pricing, are they higher than some other companies? Sure. Are they lower than others? Again, yes.hyperbolica wrote: ↑Mon May 20, 2019 5:20 pm I have mixed feelings about this deal. On one hand it's great that we might have another shot at Kanstul and Olds horns. Kanstul stuff was very affordable, and kind of minimalist design . On the other hand BAC has a reputation for severely overpriced and kind of ornate stuff.
They don't want to be the next Kanstul, or end up in financial hot water like Shires did. They are simply charging what they feel they need to in order to grow a US custom horn company in a market where there are so few. Some may find their pricing more aggressive, while others will understand what they stand for. Personally, I get it, and wholeheartedly support what they are doing for the industry.
Check out our new bass trombone doubling mouthpieces: https://www.librassco.com/broadway-bass