Marcellus

Post Reply
Tbarh
Posts: 380
Joined: Thu Aug 16, 2018 12:59 pm

Marcellus

Post by Tbarh »

Was the Conn /Benge/UMI "Marcellus" mouthpiece available with a small shank?

Trond
User avatar
Doug Elliott
Posts: 2950
Joined: Wed Mar 21, 2018 10:12 pm
Location: Maryand

Re: Marcellus

Post by Doug Elliott »

Not that I know of.
"I know a thing or two because I've seen a thing or two."
Posaunus
Posts: 3424
Joined: Fri Mar 23, 2018 9:54 pm
Location: California

Re: Marcellus

Post by Posaunus »

I think such a mouthpiece (roughly 5G size in the Bach world, with a deep V-shaped cup) would be rather large for most small-shank applications - but I've seen folks use a similarly-sized small-shank Schilke 51D, so what do I know? :idk:
Tbarh
Posts: 380
Joined: Thu Aug 16, 2018 12:59 pm

Re: Marcellus

Post by Tbarh »

Posaunus wrote: Wed May 15, 2019 1:04 pm I think such a mouthpiece (roughly 5G size in the Bach world, with a deep V-shaped cup) would be rather large for most small-shank applications - but I've seen folks use a similarly-sized small-shank Schilke 51D, so what do I know? :idk:
Big, Maybe.. But with a tighter throat.. Remember, a Bach 36 and even a Conn 78H can be used symphonically...would make a good " one size fits all" piece.. :good:
Posaunus
Posts: 3424
Joined: Fri Mar 23, 2018 9:54 pm
Location: California

Re: Marcellus

Post by Posaunus »

The large-shank Marcellus does not have a "tight throat" - it's 6.40mm (0.252") diameter; cup I.D is 25.50mm per spec.

Closest small-shank in the Bach family is probably Bach 5GS, also 25.50mm cup, 6.63mm (0.261") throat - or just a touch larger than a 6½AL. Certainly a reasonable option for a Bach 36 or Conn 78H/79H, especially in a "concert" setting. (My oversight - I was originally thinking small-bore trombones when I said a small-shank Marcellus might be too large.) :oops:

Other small-bore options roughly in this size range:
• Giardinelli SYM-AL
• Giardinelli 4M
• Giddings "Harry Watters"
• Hammond 12M
• Josef Klier 7C
• Laskey 54M
• Denis Wick 6BS
• Denis Wick 5BS
• Yamaha 51 (older model)
• Doug Elliott
Tbarh
Posts: 380
Joined: Thu Aug 16, 2018 12:59 pm

Re: Marcellus

Post by Tbarh »

Posaunus wrote: Wed May 15, 2019 5:28 pm The large-shank Marcellus does not have a "tight throat" - it's 6.40mm (0.252") diameter; cup I.D is 25.50mm per spec.

Closest small-shank in the Bach family is probably Bach 5GS, also 25.50mm cup, 6.63mm (0.261") throat - or just a touch larger than a 6½AL. Certainly a reasonable option for a Bach 36 or Conn 78H/79H, especially in a "concert" setting. (My oversight - I was originally thinking small-bore trombones when I said a small-shank Marcellus might be too large.) :oops:

Other small-bore options roughly in this size range:
• Giardinelli SYM-AL
• Giardinelli 4M
• Giddings "Harry Watters"
• Hammond 12M
• Josef Klier 7C
• Laskey 54M
• Denis Wick 6BS
• Denis Wick 5BS
• Yamaha 51 (older model)
• Doug Elliott
Thanks for the suggestions :good:
I suppose that the throat is not right per se, but with this rim/Cup size i think its comparatively small.. This was my favourite piece when i played Tenor exclusively so i am having someone make one of them with a 1 1/2G rim to make bass doubling easier..
Post Reply

Return to “Mouthpieces”