Serafin Alschausky patent

Post Reply
JesusVicente
Posts: 13
Joined: Sun Oct 21, 2018 7:38 am
Location: Vigo (Spain)

Serafin Alschausky patent

Post by JesusVicente »

Hello, I wonder if that patent was ever built. I guess, not confortable and smooth enough, specially while you are moving the four slides :wink:

http://www.freepatentsonline.com/1428675.pdf
You do not have the required permissions to view the files attached to this post.
User avatar
sirisobhakya
Posts: 296
Joined: Mon Jun 11, 2018 8:04 pm
Location: Bangkok, Thailand
Contact:

Re: Serafin Alschausky patent

Post by sirisobhakya »

Compensating F valve? Interesting, but seems heavy. And if the valve is in the usualposition, there have to be a fancy tubing (and bracing) job to do...
Chaichan Wiriyaswat
Bangkok, Thailand
“Why did I buy so many horns when I only have one mouth…?”
Bart
Posts: 36
Joined: Wed Apr 18, 2018 8:47 am
Location: The Netherlands

Re: Serafin Alschausky patent

Post by Bart »

Interesting design! Probably very slide-heavy though...

I found this picture of such a trombone pitched in F / A flat:
csm_4786_www01_1980-2721_shmpop_c6397_posaune_1e8ef64d24.jpg

For the record: this comes from the website of the Historic Museum Basel: https://www.hmb.ch/sammlung/object/alt- ... atent.html
You do not have the required permissions to view the files attached to this post.
User avatar
JohnL
Posts: 1563
Joined: Fri Mar 23, 2018 9:01 am
Contact:

Re: Serafin Alschausky patent

Post by JohnL »

sirisobhakya wrote: Fri Jan 11, 2019 9:33 am Compensating F valve?
If I read the patent correctly, the valve's standing position has both sets of slide tubes active, placing the horn in Bb; depressing the valve control removes one set of slide tubes and raises the the key a fifth to F.

I can see some significant challenges in the building of a working model, let alone mass production.
User avatar
Doug Elliott
Posts: 2950
Joined: Wed Mar 21, 2018 10:12 pm
Location: Maryand

Re: Serafin Alschausky patent

Post by Doug Elliott »

So that picture is with the slide extended. Very small positions.
Very interesting but I think very impractical... but still very interesting.
"I know a thing or two because I've seen a thing or two."
AndrewMeronek
Posts: 972
Joined: Fri Mar 30, 2018 6:09 pm
Location: Detroit area
Contact:

Re: Serafin Alschausky patent

Post by AndrewMeronek »

That might be pretty difficult to get used to. Observe that because of the way that valve works, not only will the pitch change, but slide positions change with the pitch change.
“All musicians are subconsciously mathematicians.”

- Thelonious Monk
User avatar
paulyg
Posts: 684
Joined: Thu May 17, 2018 12:30 pm

Re: Serafin Alschausky patent

Post by paulyg »

My first thought is THAT IS SOOOOOOOO COOL

Also, that bell bend is a work of art. Ascending valves seem to not be that useful for trombones; maybe this design has some utility, however.

One could use a similar approach for a contrabass trombone. Make the slide valve descending, and add a second valve "conventionally" placed in the bell section. The instrument, while still heavy, would be much better balanced and compact than traditional contras.
Paul Gilles
Aerospace Engineer & Trombone Player
Robindubois
Posts: 35
Joined: Fri Dec 21, 2018 5:51 am

Re: Serafin Alschausky patent

Post by Robindubois »

Have a look at this.
It's Chinese and it's in plastic!!
If someone would buy it just out of curiosity 😁

ABS plastic construction Tromba TPJ-SL Plastic Jazz bone-silver, Bb Tenor
https://s.click.aliexpress.com/e/bQBRa2FW
You do not have the required permissions to view the files attached to this post.
User avatar
Burgerbob
Posts: 4526
Joined: Mon Apr 23, 2018 8:10 pm
Location: LA
Contact:

Re: Serafin Alschausky patent

Post by Burgerbob »

Robindubois wrote: Sun Jan 13, 2019 4:04 am Have a look at this.
It's Chinese and it's in plastic!!
If someone would buy it just out of curiosity 😁

ABS plastic construction Tromba TPJ-SL Plastic Jazz bone-silver, Bb Tenor
https://s.click.aliexpress.com/e/bQBRa2FW
Not quite. That's just a double slide.
Aidan Ritchie, LA area player and teacher
timothy42b
Posts: 1467
Joined: Tue Mar 27, 2018 5:51 am
Location: central Virginia

Re: Serafin Alschausky patent

Post by timothy42b »

Ah, the Jazzbone. I didn't know it had made it into production. The inventor was a member on the old Trombone Forum page, now defunct. (the page is defunct, not the inventor.) He saw it as an improvement on the DEG Quadraslide idea, and his ideas made sense to me. But it seemed like it would be very tricky to execute and still get a good slide, and with short positions you would need a really good slide. My pBone slides are not great, especially the alto, otherwise I'd play them more.
Robindubois
Posts: 35
Joined: Fri Dec 21, 2018 5:51 am

Re: Serafin Alschausky patent

Post by Robindubois »

Burgerbob wrote: Sun Jan 13, 2019 4:09 am
Robindubois wrote: Sun Jan 13, 2019 4:04 am Have a look at this.
It's Chinese and it's in plastic!!
If someone would buy it just out of curiosity 😁

ABS plastic construction Tromba TPJ-SL Plastic Jazz bone-silver, Bb Tenor
https://s.click.aliexpress.com/e/bQBRa2FW
Not quite. That's just a double slide.
Oh yes you're right. I just got excited too quickly.
I still wounder how good this instrument would play.
bcschipper
Posts: 203
Joined: Sat Sep 22, 2018 11:52 pm
Location: California
Contact:

Re: Serafin Alschausky patent

Post by bcschipper »

There are precursors to trombones with valves in the slide section. Kruspe has a patent from 1906 for a combined alto-tenor trombone with a valve in the slide section. Rumors have that Robert Mueller developed it with Kruspe. It doesn't have a double slide. But double slides were already around as well. There is one made by Piering in 1903 in the Musikinstrumente Museum Leipzig.

The photo from Museum in Basel is actually one that was built according to the Alschausky patent. It has Alschausky engraved on it. Apparently Alschausky developed it with Leopold Mitsching in Elberfeld. (Monke learned from Mitsching.) It was built by Bohland & Fuchs though, just across the border from Markneukirchen. Late in his time at the Gewandhausorchester Leipzig, Alschausky applied for a permit to trade with brass instruments. This instrument was build around that time. There are patents in Germany, Switzerland, and the US. He offered "Sopran-tenor-posaunen" with a range of 4 1/2 octaves. It seems that he also traded with them when he move to the US, first to Cincinnati and then to LA. He didn't build them, just let them be built (probably at Bohland & Fuchs) and traded.

Earlier Alschausky complained about the quality of instrument makers in Markneukirchen like Piering and also about some instrument makers in Leipzig. There is a photo of him from 1910 playing a Kruspe which looks like a precursor of a Kruspe Weschke.

Werner Chr. Schmidt in Markneukirchen offers an Alschausky mouthpiece. It has a very deep cup and a huge rim although the cup diameter is not big. Previously, I heard somebody mentioning that it was made for him after some injury (although I never figured this out completely). I have one and it is not very playable (except it might be the best mouthpiece to use after 8 hours of straight playing).

Anyway, this guy was pretty prolific: solo trombonist, playing in orchestra, composer, trading with instruments, designing instruments, running a music school ...

There is an article about him by Rolf Handrow in "Die Deutsche Posaune - Ein Leipziger Welterfolg", Katalog zur Sonderausstellung im Grassi Museum fuer Musikinstrumente der Universitaet Leipzig, edited by the Verein fuer Mitteldeutsche Posaunengeschichte (Association for Middle German Trombone History).
User avatar
heinzgries
Posts: 231
Joined: Tue Apr 24, 2018 4:52 pm
Location: Heidelberg/germany

Re: Serafin Alschausky patent

Post by heinzgries »

bcschipper wrote: Sun Jan 13, 2019 7:10 pm There are precursors to trombones with valves in the slide section. Kruspe has a patent from 1906 for a combined alto-tenor trombone with a valve in the slide section. Rumors have that Robert Mueller developed it with Kruspe. It doesn't have a double slide.
is a picture avaiable from the Kruspe alto-tenor trombone with a valve in the slide section?
User avatar
BillO
Posts: 112
Joined: Fri Mar 23, 2018 11:26 am
Location: Deep woods of central Ontario

Re: Serafin Alschausky patent

Post by BillO »

AndrewMeronek wrote: Fri Jan 11, 2019 10:35 am That might be pretty difficult to get used to. Observe that because of the way that valve works, not only will the pitch change, but slide positions change with the pitch change.
Yes, of course. Just like a tenor trombone with F-att, or a single/double valve bass trombone.

My double independent bass has no less than 4 different series' of slide positions.

I'm guessing you play a straight horn. :wink:
bcschipper
Posts: 203
Joined: Sat Sep 22, 2018 11:52 pm
Location: California
Contact:

Re: Serafin Alschausky patent

Post by bcschipper »

heinzgries wrote: Tue Jan 15, 2019 3:26 am
bcschipper wrote: Sun Jan 13, 2019 7:10 pm There are precursors to trombones with valves in the slide section. Kruspe has a patent from 1906 for a combined alto-tenor trombone with a valve in the slide section. Rumors have that Robert Mueller developed it with Kruspe. It doesn't have a double slide.
is a picture avaiable from the Kruspe alto-tenor trombone with a valve in the slide section?
Yes, there is a picture on p. 97 in "Die Deutsche Posaune - Ein Leipziger Welterfolg", Katalog zur Sonderausstellung im Grassi Museum fuer Musikinstrumente der Universitaet Leipzig, edited by the Verein fuer Mitteldeutsche Posaunengeschichte, 2nd edition, 2013. It also says that the document is owned by Peter Heldmann, der last owner of Ed. Kruspe. There is actually a picture with two versions of the Kruspe alto-tenor trombone with valve section in the slide.

Since you are in Germany, you can easily get the catalog from the museum. It is a very nice book anyway. It also has photos of two Sattler alto trombones, two Penzel alto trombones, and an 1720th alto trombone by Ehe with some measurements. If you have problems getting the book, I can scan the page with the picture of the Kruspe Alt-Tenor-Posaune with valve in the slide section and email it to you.
User avatar
LeTromboniste
Posts: 1019
Joined: Wed Apr 11, 2018 7:22 am
Location: Sion, CH

Re: Serafin Alschausky patent

Post by LeTromboniste »

Doug Elliott wrote: Fri Jan 11, 2019 10:31 am So that picture is with the slide extended. Very small positions.
Very interesting but I think very impractical... but still very interesting.
Short positions yes, but it's in F, so actually not that short. The question is more whether it's more practical to have a double slide, a long slide with a handle or a slide too short to have more than 5 solid positions with extra valves to compensate for that like a modern F contra.

Some guy in the 19th century invented a tenor with a shortened bell section and a double slide that gives you 9 or 10 positions, though. That must have been a bit crazy to switch to from a normal tenor!
Maximilien Brisson
www.maximilienbrisson.com
Lecturer for baroque trombone,
Hfk Bremen/University of the Arts Bremen
Post Reply

Return to “Instruments”