Screwbell Pricing

Post Reply
User avatar
Matt K
Posts: 890
Joined: Tue Mar 20, 2018 10:34 pm

Screwbell Pricing

Post by Matt K » Sat May 12, 2018 4:47 pm

Anybody have a horn converted recently? What was the total cost? Where'd you/your tech source the bell ring?
User avatar
Neo Bri
Posts: 694
Joined: Wed Mar 21, 2018 10:30 am
Location: Netherwhere
Contact:

Re: Screwbell Pricing

Post by Neo Bri » Sat May 12, 2018 5:53 pm

I got a VERY casual estimate...extremely ballpark...said MAYBE $400-500...I'll be watching this topic.
________________________________________________________
Get the word out! Make www.trombonechat.com our community!
User avatar
Matt K
Posts: 890
Joined: Tue Mar 20, 2018 10:34 pm

Re: Screwbell Pricing

Post by Matt K » Sat May 12, 2018 6:00 pm

That sounds pretty close to what I was expecting. Although that also seems to be in line with french horn screwbell pricing, but trombone should be at least a little cheaper because you don't have to disassemble it to do it right from what I understand.
User avatar
PhilipEdCarlson
Posts: 99
Joined: Thu Mar 22, 2018 10:59 pm

Re: Screwbell Pricing

Post by PhilipEdCarlson » Sat May 12, 2018 6:18 pm

the conversion must alter the playing character dramatically
Philip Carlson
TR-181, 72H, 88HCL, 32H, 30H, 4H, 50's Super, 40's Super, Buescher True-Tone 410 & The Buescher, Constellation Euph, Getzen Severenson
User avatar
Matt K
Posts: 890
Joined: Tue Mar 20, 2018 10:34 pm

Re: Screwbell Pricing

Post by Matt K » Sat May 12, 2018 7:27 pm

PhilipEdCarlson wrote:
Sat May 12, 2018 6:18 pm
the conversion must alter the playing character dramatically
Maybe! Generally it is recommended to do it to an already lighter horn to 'balance' it out so to speak. I don't have a specific horn in mind for this, or even a bell, but I really like some of these spiffy screwbell cases coming out would love the portability.

One of these days I will have a Ralph Sauer bell! Love that thing to death although the amount of classical gigs I get is pretty miniscule compared to the commercial stuff so I'm trying to focus a little in that arena first.
Jimkinkella
Posts: 32
Joined: Fri Mar 23, 2018 11:43 am
Location: Los Angeles

Re: Screwbell Pricing

Post by Jimkinkella » Sun May 13, 2018 12:45 pm

$400 to $500 is accurate.
I've had John Sandhagen do 2 for me, one ring from Shires and one from Instrument Innovations.
The Shires is lighter, and the screw is tighter / a little tougher to get lined up.
The Instrument Innovations is a lot closer to the old Holton screw feel, but it is a bit heavier.
Neither changed the sound or feel of the attack much, the heavier ring did change how much energy comes off the back of the bell a little, kinda threw me off a bit, but didn't really change the sound.
As far as weight of the horn, adding a ring to a heavier horn made less of a difference, none really, adding a ring to a light horn was more of a difference.
Since you're thinking about doing this to an alto, there have been some Pfretzschners hanging around already with a ring.
Or you could start off with a Yamaha 350C, or make your own if you wanted it to sound like a tenor.
Attached is a 350C with a holton bell in a 3/4 viola case, still working on the case.
Attachments
IMG_1217.JPG
IMG_1217.JPG (2.44 MiB) Viewed 2919 times
User avatar
Matt K
Posts: 890
Joined: Tue Mar 20, 2018 10:34 pm

Re: Screwbell Pricing

Post by Matt K » Sun May 13, 2018 2:00 pm

That's really cool. Yeah the Wessex is one horn I'm considering; also thinking about a 356 I just picked up. Too many cool options these days. What a problem to have!
boneagain
Posts: 70
Joined: Sat Mar 24, 2018 4:52 pm

Re: Screwbell Pricing

Post by boneagain » Mon May 14, 2018 10:30 am

Matt K wrote:
Sat May 12, 2018 6:00 pm
That sounds pretty close to what I was expecting. Although that also seems to be in line with french horn screwbell pricing, but trombone should be at least a little cheaper because you don't have to disassemble it to do it right from what I understand.
I'd love to know how to add a ring to a trombone without disassembling! The stem end of the ring must go on over the stem. So the bell has to come off.

Also, a LOT more horns have screw bells than trombones. To get the ring right where it needed to be on my Benge 190F, McCracken has to machine one from scratch. Same deal for one he's mounting on a Shires bell for another former apprentice.

Even with horns, McCracken finds it necessary to go to great lengths to get exactly the right angles to match at the cut line.

To me, seems like a bargain at $400 :)
User avatar
Matt K
Posts: 890
Joined: Tue Mar 20, 2018 10:34 pm

Re: Screwbell Pricing

Post by Matt K » Mon May 14, 2018 10:36 am

I'd love to know how to add a ring to a trombone without disassembling! The stem end of the ring must go on over the stem. So the bell has to come off.
By only adding screwbells to horns you've made or intend to make modular :biggrin:

That's good information. I also have been told by horn players that a non-trivial factor is the saw one uses, but I'm less privy on why that is important!
JustinCooper
Posts: 1
Joined: Mon May 14, 2018 3:41 pm

Re: Screwbell Pricing

Post by JustinCooper » Mon May 14, 2018 4:02 pm

I've done a few of these for trombone and horn and usually charge around $400 for both. The reason for keeping the price the same is that even though horn bells require a lot more solder joints to undo/redo, the rings are usually easily sourced, whereas finding a ring for a trombone means taking some measurements and doing some trig. If it's a make/model of trombone that I've done before and already know where to get the ring from, then I'll do it for $350.

I also play on a screwbell tenor and absolutely love it! I bought my Shire a little over 2 years ago (Chicago model, but with a 2RVE bell), but had to send it back after a few months for some warranty issues. Yes, as a repairman I could have fixed them myself, but there's also the principle of spending a lot of money on something and wanting it to be right! While it was back at the factory I also had them do the screwbell conversion, as I had been contemplating doing it myself and figured why not have them do it and factory finish it while it was there. And they gave me a great deal, seeing as the horn was back with them for manufacturing issues.

Having played the bell both uncut and cut, I can definitely say I prefer the cut version. The extra weight of the ring on the light bell improved the response and slightly darkened the sound, all while maintaining the original character/sound of the horn. Overall improvement was maybe 2-3% better, but when a horn is already so close to perfect, that's a pretty good! I'd definitely recommend it!
User avatar
Neo Bri
Posts: 694
Joined: Wed Mar 21, 2018 10:30 am
Location: Netherwhere
Contact:

Re: Screwbell Pricing

Post by Neo Bri » Mon May 14, 2018 4:11 pm

Jimkinkella wrote:
Sun May 13, 2018 12:45 pm
$400 to $500 is accurate.
I've had John Sandhagen do 2 for me, one ring from Shires and one from Instrument Innovations.
The Shires is lighter, and the screw is tighter / a little tougher to get lined up.
The Instrument Innovations is a lot closer to the old Holton screw feel, but it is a bit heavier.
Neither changed the sound or feel of the attack much, the heavier ring did change how much energy comes off the back of the bell a little, kinda threw me off a bit, but didn't really change the sound.
As far as weight of the horn, adding a ring to a heavier horn made less of a difference, none really, adding a ring to a light horn was more of a difference.
Since you're thinking about doing this to an alto, there have been some Pfretzschners hanging around already with a ring.
Or you could start off with a Yamaha 350C, or make your own if you wanted it to sound like a tenor.
Attached is a 350C with a holton bell in a 3/4 viola case, still working on the case.
Jim! Great to see you here, and it's been too long, my friend. Love the Bobelock case. Reminds me of my string-playing days.

Though I'm having a difficult time imagining what you're going to do with the slide.
________________________________________________________
Get the word out! Make www.trombonechat.com our community!
boneagain
Posts: 70
Joined: Sat Mar 24, 2018 4:52 pm

Re: Screwbell Pricing

Post by boneagain » Mon May 14, 2018 6:03 pm

Matt K wrote:
Mon May 14, 2018 10:36 am
I'd love to know how to add a ring to a trombone without disassembling! The stem end of the ring must go on over the stem. So the bell has to come off.
By only adding screwbells to horns you've made or intend to make modular :biggrin:

That's good information. I also have been told by horn players that a non-trivial factor is the saw one uses, but I'm less privy on why that is important!
There are jewelers' saws, razor saws, fine dovetail saws, less fine backsaws, and all kinds of hacksaws. Two big differences: finish on the cut, and width of kerf. To take it to an extreme, would you want a 1/8" table saw blade-worth of kerf taken out of your bell? The bell tapers enough near the typical ring location that less is non-linearly better. Think, for instance, of how much the flare changes in the last inch of length. It's not THAT much at the ring location, but still usually past the much more gradual tail taper.

I wish I had added a ring to my tenor back when I had chops. An addition to the nice things mentioned by others in this thread, I find that I can NOT push the horn far enough for it to break up. My chops give up first. And since the horn is not breaking up, the "ripping sheet metal" effect is considerably less.
User avatar
Neo Bri
Posts: 694
Joined: Wed Mar 21, 2018 10:30 am
Location: Netherwhere
Contact:

Re: Screwbell Pricing

Post by Neo Bri » Mon May 14, 2018 6:48 pm

boneagain wrote:
Mon May 14, 2018 6:03 pm
And since the horn is not breaking up, the "ripping sheet metal" effect is considerably less.
Bummer. That's the effect I LOVE.
________________________________________________________
Get the word out! Make www.trombonechat.com our community!
User avatar
Matt K
Posts: 890
Joined: Tue Mar 20, 2018 10:34 pm

Re: Screwbell Pricing

Post by Matt K » Mon May 14, 2018 7:50 pm

I see! Yes, that does make sense.

And Justin, thanks for your recommendation about the Shires bell. My large bore is a 2RVET7 bell and I've thought about doing it myself... I actually really dig the RS bell too. I'm torn between ultimately buying an RS bell or converting my current one. I don't get enough large bore work to justify either at the moment but man do they play great.
boneagain
Posts: 70
Joined: Sat Mar 24, 2018 4:52 pm

Re: Screwbell Pricing

Post by boneagain » Tue May 15, 2018 12:45 am

Neo Bri wrote:
Mon May 14, 2018 6:48 pm

Bummer. That's the effect I LOVE.
ROFL
User avatar
Mv2541
Posts: 72
Joined: Thu Mar 29, 2018 10:07 am
Location: New Jersey

Re: Screwbell Pricing

Post by Mv2541 » Tue May 15, 2018 10:58 am

I don't know if it's cool to drop names so I won't, but a very popular NYC tech quoted me at $400. I would have gone for it except you can't really reap the benefits without buying a new case.
Some food for thought: the new Weston Sprott mode Courtois does not have that many changes but I think it plays a lot darker and with more core than the regular 420. I can't say the screw bell is THE reason but it must be part of it.
Bard College Conservatory 2020
Shires- Brad Close Seamed Copper MV42 Pipe, TW47, Axial, TY, 7YLW- Greg Black 4G-5GL w/N106 rim
Rath R100- Lexan N105.C+.C+2
Shires- Bollinger Slide w/ Nickel Crook, Bollinger Axials, BG, Bollinger Bell- Rath 1 1/4
User avatar
jacobgarchik
Posts: 13
Joined: Sat Oct 27, 2018 6:07 pm

Re: Screwbell Pricing

Post by jacobgarchik » Tue Oct 30, 2018 10:26 am

My guy used a stock French Horn ring. Had 2 conversions done, a Bach 36 and a 42. They play the same to me. Tiny bit heavier to hold.
JonTheCadet
Posts: 16
Joined: Mon May 28, 2018 4:21 am

Re: Screwbell Pricing

Post by JonTheCadet » Tue Oct 30, 2018 1:17 pm

Speaking of screwbell, Sierman, a Chinese knockoff, just patented screwbells on trombones. Clearly not their invention. Patented a leather strap similar to Get-a-grip and a bridge with female threads similar to Edwards.

Best regards,

Jon
User avatar
Burgerbob
Posts: 214
Joined: Mon Apr 23, 2018 8:10 pm
Location: LA
Contact:

Re: Screwbell Pricing

Post by Burgerbob » Tue Oct 30, 2018 2:18 pm

I'd say you're about $1k total with a case.
Bass Trombone
DL Band
SLO Symphony
User avatar
jacobgarchik
Posts: 13
Joined: Sat Oct 27, 2018 6:07 pm

Re: Screwbell Pricing

Post by jacobgarchik » Wed Oct 31, 2018 8:01 am

I bought my 70s Holton flat case on eBay for $50. Some guy had a bunch of dead stock. It was brand new.
You can also go with a gun case for a lot less than the $550 Marcus Bonna cases.
As I said in another thread, the whole flat case scene is in its infancy. Really flat trombone cases should be cheaper than standard cases because they are simpler to manufacture!
Sid
Posts: 22
Joined: Fri Mar 23, 2018 8:44 am

Re: Screwbell Pricing

Post by Sid » Tue Nov 13, 2018 3:57 pm

I had my Holton TR180 converted to a screwbell done locally here in STL. I believe the total on the conversion was $225. The MB case was $550 from Hornguys. The conversion and case has made traveling with that horn much easier with much less stress on my end from being checked on a plane or even taking up room on an out of town gig.
MalecHeermans
Posts: 18
Joined: Mon Apr 23, 2018 6:40 pm

Re: Screwbell Pricing

Post by MalecHeermans » Wed Nov 14, 2018 2:03 pm

Neo Bri wrote:
Mon May 14, 2018 4:11 pm
Jimkinkella wrote:
Sun May 13, 2018 12:45 pm
$400 to $500 is accurate.
I've had John Sandhagen do 2 for me, one ring from Shires and one from Instrument Innovations.
The Shires is lighter, and the screw is tighter / a little tougher to get lined up.
The Instrument Innovations is a lot closer to the old Holton screw feel, but it is a bit heavier.
Neither changed the sound or feel of the attack much, the heavier ring did change how much energy comes off the back of the bell a little, kinda threw me off a bit, but didn't really change the sound.
As far as weight of the horn, adding a ring to a heavier horn made less of a difference, none really, adding a ring to a light horn was more of a difference.
Since you're thinking about doing this to an alto, there have been some Pfretzschners hanging around already with a ring.
Or you could start off with a Yamaha 350C, or make your own if you wanted it to sound like a tenor.
Attached is a 350C with a holton bell in a 3/4 viola case, still working on the case.
Jim! Great to see you here, and it's been too long, my friend. Love the Bobelock case. Reminds me of my string-playing days.

Though I'm having a difficult time imagining what you're going to do with the slide.
Isn't the slide on the 350C shorter than standard?

If it all fits in that viola case I think converting a 350C might be one of the most brilliant applications yet!
Jimkinkella
Posts: 32
Joined: Fri Mar 23, 2018 11:43 am
Location: Los Angeles

Re: Screwbell Pricing

Post by Jimkinkella » Wed Nov 14, 2018 2:26 pm

3/4 viola case, to be exact. The slide is just the right size, the bell is kind of tight, and it is ridiculously convenient.
hornbuilder
Posts: 28
Joined: Wed May 02, 2018 9:20 pm

Re: Screwbell Pricing

Post by hornbuilder » Wed Nov 14, 2018 5:10 pm

JonTheCadet wrote:
Tue Oct 30, 2018 1:17 pm
Speaking of screwbell, Sierman, a Chinese knockoff, just patented screwbells on trombones. Clearly not their invention. Patented a leather strap similar to Get-a-grip and a bridge with female threads similar to Edwards.

Best regards,

Jon
What? Any evidence of this? They really have a nerve, if this is true, considering that all they have done is directly steal ideas from other makers!

M
User avatar
Matt K
Posts: 890
Joined: Tue Mar 20, 2018 10:34 pm

Re: Screwbell Pricing

Post by Matt K » Wed Nov 14, 2018 5:18 pm

hornbuilder wrote:
Wed Nov 14, 2018 5:10 pm
JonTheCadet wrote:
Tue Oct 30, 2018 1:17 pm
Speaking of screwbell, Sierman, a Chinese knockoff, just patented screwbells on trombones. Clearly not their invention. Patented a leather strap similar to Get-a-grip and a bridge with female threads similar to Edwards.

Best regards,

Jon
What? Any evidence of this? They really have a nerve, if this is true, considering that all they have done is directly steal ideas from other makers!

M
There's a thread on it on Facebook. I can't remember which trombone group it is though. A few people familiar with patent law in China indicated that the paperwork all looks legit. I can't speak to their voracity though.
Jgittleson
Posts: 239
Joined: Wed Jun 13, 2018 2:41 am

Re: Screwbell Pricing

Post by Jgittleson » Wed Nov 14, 2018 5:47 pm

Yeah that happened. Should get interesting!
mbarbier
Posts: 4
Joined: Thu May 17, 2018 9:58 pm

Re: Screwbell Pricing

Post by mbarbier » Wed Nov 14, 2018 10:08 pm

Just had John do my tenor maybe 2-3 months ago, shires ring. $200 for parts, $500 total. Bell comes off so that probably helped the cost. Case was more...watched him do it- $500 felt like a bargin given the "only one shot" nature of the job.

Been my daily work horn for a while so I know it well and it feels like it basically plays the same. It felt exactly the same for the first hour, maybe a touch sluggish the second, and totally normal the third. The only difference I think i feel is that it's a little more solid on the 2nd partial than it was precut.

A student of mine has the Sauer/Shires one. Really nice horn, but don't much care for the case (though it does look classy). Really flat, but has no taper so it just feels like it has dead space (it would be nice if the extra space could be used to put things). Has no backpack straps so it doesn't seem so comfortable if you're carrying a lot and makes it harder to hang over the shoulder to discreetly bring on a plane if needs be.
trombone faculty at CalArts
1/2 of RAGE Thormbones
https://soundcloud.com/mattbarbier-1
http://www.mattbarbier.com/
jchiang9
Posts: 30
Joined: Fri Apr 06, 2018 10:16 pm

Re: Screwbell Pricing

Post by jchiang9 » Thu Nov 15, 2018 1:32 am

mbarbier wrote:
Wed Nov 14, 2018 10:08 pm
Just had John do my tenor maybe 2-3 months ago, shires ring. $200 for parts, $500 total. Bell comes off so that probably helped the cost. Case was more...watched him do it- $500 felt like a bargin given the "only one shot" nature of the job.

Been my daily work horn for a while so I know it well and it feels like it basically plays the same. It felt exactly the same for the first hour, maybe a touch sluggish the second, and totally normal the third. The only difference I think i feel is that it's a little more solid on the 2nd partial than it was precut.

A student of mine has the Sauer/Shires one. Really nice horn, but don't much care for the case (though it does look classy). Really flat, but has no taper so it just feels like it has dead space (it would be nice if the extra space could be used to put things). Has no backpack straps so it doesn't seem so comfortable if you're carrying a lot and makes it harder to hang over the shoulder to discreetly bring on a plane if needs be.
Just out of curiosity, what bell did you have cut? Just wondering if it not changing much has anything to do with the weight or style of your bell
mbarbier
Posts: 4
Joined: Thu May 17, 2018 9:58 pm

Re: Screwbell Pricing

Post by mbarbier » Thu Nov 15, 2018 8:23 am

[/quote]
Just out of curiosity, what bell did you have cut? Just wondering if it not changing much has anything to do with the weight or style of your bell
[/quote]

It's a funny one and that I'm not totally sure about itxs details. It's an unstampted prototype that's a Benge bell, but quite thin and maybe a different alloy than normal. Going to have it done to my 88 soon, so will have a more traditional comparison.
trombone faculty at CalArts
1/2 of RAGE Thormbones
https://soundcloud.com/mattbarbier-1
http://www.mattbarbier.com/
User avatar
jacobgarchik
Posts: 13
Joined: Sat Oct 27, 2018 6:07 pm

Re: Screwbell Pricing

Post by jacobgarchik » Sun Nov 18, 2018 3:03 pm

If you're put off by the price, just get a factory cut Holton with a case. They are a great deal.
Jimkinkella
Posts: 32
Joined: Fri Mar 23, 2018 11:43 am
Location: Los Angeles

Re: Screwbell Pricing

Post by Jimkinkella » Sun Nov 18, 2018 5:30 pm

The factory screw-bell Holton's are very nice. I've owned both the straight and valved dual bores.
Super comfortable, very consistent, a little dark for the way I play, but very nice.
Not a bad case, but I threw a belt around mine when on a plane just in case.

I'd still be comfortable cutting almost any bell, I've done it to a couple.
Post Reply

Return to “Modification & Repair”