Kleinhammer (Slot-In) Valve Fabrication?

[d00n]

Hi everyone,

I'm wondering if anyone out there knows a tech who could build a Kleinhammer/Slot-in valve section for me (Preferably continental U.S.). The linkage and mounting mechanism won't be an issue, as I have a tech who can take care of all that near to me. All I'm looking for is someone to build the valve and the loop.

Also, if anyone has an extra Marston valve burning a hole in their pocket, I'd be happy to take it off your hands I'm getting a nice Mt. Vernon horn, and would like to maintain the originality of the horn as much as possible while making it viable to play modern bass trombone rep.

Thanks in advance for the help!

[eatanick]

I had the same question a number of years ago. I ended up finding an original Holton valve, but I believe Terry Pierce in NY has fabricated a number of them.

[Edit] I was too quick reading your post and now realise you're likely talking about a slot in second valve for your Mount Vernon 50 rather than a Holton 169/185. I'm sure Terry Pierce could do the work for you, as could many other great techs. If it's not for a Holton, it should be a simpler task as the bore of the valve tubing is a more standard size on Bachs and most other brands. I've seen some of Benn Hansson's work on a 50 he converted to Instrument Innovations valves in a slot-in dependant configuration, so he might be a good place to start.

[BGuttman]

For what it's worth, Benn is on the board as octavposaune. You might also look for Eric Edwards and John Sandhagen. Benn is near Seattle WA, Eric is near Dallas TX, and John is near Los Angeles CA.

You could also contact Bob Osmun at Osmun Brass (Acton MA, near Boston). Bob has done a lot of custom work in the past.

[hornbuilder]

One I did recently on a Reynolds And a Bach 50.
Have made several others.

Note that you need to modify the F wrap on a factory Bach, as there needs to be clearance for the rotor and the tuning slide. I had to modify the Reynolds to allow it to all fit.

[hornbuilder]

And the complete horn made for Max Seigle.

[CheeseTray]

Very impressive work!

[greenbean]

Yeah, beautiful work, Matthew!

And I would use ANY of the techs mentioned so far above without hesitation.

[BigBadandBass]

I can’t speak to Terry’s custom work but I had him do some maintenance on my bell, dents and some polish. He did some amazing work, heavily recommend him

[LIBrassCo]

One I did recently on a Reynolds And a Bach 50.
Have made several others.

Note that you need to modify the F wrap on a factory Bach, as there needs to be clearance for the rotor and the tuning slide. I had to modify the Reynolds to allow it to all fit.

That Reynolds has to be the sweetest plug in I've ever seen!

[Crazy4Tbone86]

Indeed, we must give credit where it is certainly due. Matthew, those are some very nice plug-in set ups!

[elmsandr]

One I did recently on a Reynolds And a Bach 50.
Have made several others.

Note that you need to modify the F wrap on a factory Bach, as there needs to be clearance for the rotor and the tuning slide. I had to modify the Reynolds to allow it to all fit.

That Reynolds has to be the sweetest plug in I've ever seen!

That is so very pretty... That or the one for Max are the perfect configurations for a Bach 50.

To the OP... I am in process (couple of years now, sadly) of doing the same thing. The having to modify the existing horn as Matt noticed is giving me pause. After a bit of searching I did find a used vintage valve section from BrassArk, that's probably a good place to go sniffing if you want to match the vintage. Check the horn you have, the valve section tubing size changed at some point for Bach. It is different bore and OD on my NY than on current production parts. I don't know exactly when it changed, my early Elkhart (96XX) Marston looking valves has essentially contemporary wrap parts. The old stuff is close enough that it could be made to fit... except the tuning slide inners, which would need an appropriate size or replacement. I got a matching vintage so that I could still use the current single configuration as well and the slot-in valve.

Cheers,
Andy

[Finetales]

Yeah, that Reynolds is absolutely gorgeous. They're all beautiful work, of course, but that Reynolds...wow. Makes me want to get one done that way for my stock 72H.

[Burgerbob]

Makes me want to get one done that way for my stock 72H.

DO IITTTT

[Finetales]

72H birdcage or 2-valve 3B...decisions...

[Matt K]

Double valve 3B, so I can copy the end result when I do mine

[WGWTR180]

Hi everyone,

I'm wondering if anyone out there knows a tech who could build a Kleinhammer/Slot-in valve section for me (Preferably continental U.S.). The linkage and mounting mechanism won't be an issue, as I have a tech who can take care of all that near to me. All I'm looking for is someone to build the valve and the loop.

Also, if anyone has an extra Marston valve burning a hole in their pocket, I'd be happy to take it off your hands I'm getting a nice Mt. Vernon horn, and would like to maintain the originality of the horn as much as possible while making it viable to play modern bass trombone rep.

Thanks in advance for the help!

Where do you live? Choosing a tech might determine who you choose depending on whether you need to ship the horn or can drive it and drop it off for the work. Terry Pierce in New York has done multiple slot-in-valve sections for various New York players. But if you live waaaaaaay away from New York you might seek someone closer.

[LIBrassCo]

Hi everyone,

I'm wondering if anyone out there knows a tech who could build a Kleinhammer/Slot-in valve section for me (Preferably continental U.S.). The linkage and mounting mechanism won't be an issue, as I have a tech who can take care of all that near to me. All I'm looking for is someone to build the valve and the loop.

Also, if anyone has an extra Marston valve burning a hole in their pocket, I'd be happy to take it off your hands I'm getting a nice Mt. Vernon horn, and would like to maintain the originality of the horn as much as possible while making it viable to play modern bass trombone rep.

Thanks in advance for the help!

Where do you live? Choosing a tech might determine who you choose depending on whether you need to ship the horn or can drive it and drop it off for the work. Terry Pierce in New York has done multiple slot-in-valve sections for various New York players. But if you live waaaaaaay away from New York you might seek someone closer.

Terry's work is among the best out there, but I'm under the impression he isn't taking a ton of jobs these days. A good friend of mine has one of his plug ins, and its perhaps the best ive played in this design. The only thing i dont love is the way he does his linkage on some horns, particularly his f lever. They work fine and all, but egonomically speaking out of the half dozen or so I've played its just not a good fit for my hand.