Trombone wall hanger

Post Reply
ttf_MikeBMiller
Posts: 0
Joined: Sat Mar 31, 2018 12:01 pm

Trombone wall hanger

Post by ttf_MikeBMiller » Mon Nov 13, 2017 7:52 am

Does anybody know where to get a trombone wall hanger like Chris Bill has in the background on this video? I was looking at the thing with the squirrel on top and a trombone hanging from each side.

https://www.youtube.com/watch?v=Rqldh4u ... qStYYxHmDj

Yeah, the video is pretty good too.


ttf_BillO
Posts: 0
Joined: Sat Mar 31, 2018 11:58 am

Trombone wall hanger

Post by ttf_BillO » Mon Nov 13, 2017 7:48 pm

I think you have to make them yourself.
ttf_robcat2075
Posts: 0
Joined: Sat Mar 31, 2018 11:58 am

Trombone wall hanger

Post by ttf_robcat2075 » Mon Nov 13, 2017 10:00 pm

Many possibilities for DIY...

rubber coated wall hanger


I presume you asked in the comments to that video and got no reply?




I'm curious about Carol Jarvis' recording space in that video.  It's built out of shipping pallets lined with vanity lights?  Image
ttf_BillO
Posts: 0
Joined: Sat Mar 31, 2018 11:58 am

Trombone wall hanger

Post by ttf_BillO » Tue Nov 14, 2017 6:15 am

Don't forget the slide rest.

I wanted to do something like this, but my wife won't let me. Image Image
ttf_Matt K
Posts: 0
Joined: Sat Mar 31, 2018 11:53 am

Trombone wall hanger

Post by ttf_Matt K » Tue Nov 14, 2017 7:04 am

I did something DIY that is similar:
https://drive.google.com/open?id=1M3Z-3 ... TNrJa1EtFS

I prefer to have something sticking out of the wall so that I don't smack the drywall on accident.  I have hooks that the slide rest on for my heavier horns such that it balances the weight between the bell and the slide.  Those ones actually rotate so I can make them higher or lower depending on what horn I have on them.

I basically got a few dowels and drilled into two flat pieces of wood and then screwed/glued the dowel in place. Then topped it off with a drilled out plunger and rubber stool tip.  You can't see it in these pictures, but I put a piece of cloth over the plungers to prevent them from wearing the bell down when I would remove and place them on it.
ttf_Pre59
Posts: 0
Joined: Sat Mar 31, 2018 12:01 pm

Trombone wall hanger

Post by ttf_Pre59 » Tue Nov 14, 2017 7:12 am

I Googled "trombone wall hanger" and got this. https://www.amazon.com/String-Swing-HH1 ... B00ICR2Y4I

I don't know if the construction limits the bell size .
ttf_Geezerhorn
Posts: 0
Joined: Sat Mar 31, 2018 11:59 am

Trombone wall hanger

Post by ttf_Geezerhorn » Tue Nov 14, 2017 7:16 am

Quote from: BillO on Nov 14, 2017, 06:15AMDon't forget the slide rest.

I wanted to do something like this, but my wife won't let me. Image Image

I would interpret that as she wants to hear you play, not see your trombone displayed. Play on, dude!

...Geezer
ttf_MikeBMiller
Posts: 0
Joined: Sat Mar 31, 2018 12:01 pm

Trombone wall hanger

Post by ttf_MikeBMiller » Fri Nov 17, 2017 9:14 am

Quote from: Pre59 on Nov 14, 2017, 07:12AMI Googled "trombone wall hanger" and got this. https://www.amazon.com/String-Swing-HH1 ... B00ICR2Y4I

I don't know if the construction limits the bell size .

I saw that, but you have to have that slat wall for it to work.
ttf_Pre59
Posts: 0
Joined: Sat Mar 31, 2018 12:01 pm

Trombone wall hanger

Post by ttf_Pre59 » Sat Nov 18, 2017 3:30 am

Quote from: MikeBMiller on Nov 17, 2017, 09:14AMI saw that, but you have to have that slat wall for it to work.

There are some that require slat fixings but this one has 2 holes for screws.
ttf_MikeBMiller
Posts: 0
Joined: Sat Mar 31, 2018 12:01 pm

Trombone wall hanger

Post by ttf_MikeBMiller » Mon Nov 20, 2017 4:23 pm

Quote from: Pre59 on Nov 18, 2017, 03:30AMThere are some that require slat fixings but this one has 2 holes for screws.

I just noticed that. Thanks.
ttf_Matt K
Posts: 0
Joined: Sat Mar 31, 2018 11:53 am

Trombone wall hanger

Post by ttf_Matt K » Mon Nov 20, 2017 4:35 pm

The ones that I used were able to be drilled to the studs, fwiw. Very stable!
ttf_Don Draper
Posts: 0
Joined: Sat Mar 31, 2018 11:59 am

Trombone wall hanger

Post by ttf_Don Draper » Thu Nov 23, 2017 9:52 am

Quote from: Pre59 on Nov 14, 2017, 07:12AMI Googled "trombone wall hanger" and got this. https://www.amazon.com/String-Swing-HH1 ... B00ICR2Y4I

I don't know if the construction limits the bell size .

I have several of these, they are great.  I mounted them to a beautiful piece of cherry that I had lacquered and mounted to the studs in the wall.  My wife likes the look and they free up a lot of floor space.

DD
ttf_Don Draper
Posts: 0
Joined: Sat Mar 31, 2018 11:59 am

Trombone wall hanger

Post by ttf_Don Draper » Thu Nov 23, 2017 9:52 am

Quote from: Pre59 on Nov 14, 2017, 07:12AMI Googled "trombone wall hanger" and got this. https://www.amazon.com/String-Swing-HH1 ... B00ICR2Y4I

I don't know if the construction limits the bell size .

I have several of these, they are great.  I mounted them to a beautiful piece of cherry that I had lacquered and mounted to the studs in the wall.  My wife likes the look and they free up a lot of floor space.

DD
Post Reply

Return to “Accessories”