Curved hand grip for 3b

Post Reply
Mikebmiller
Posts: 88
Joined: Tue Mar 27, 2018 9:13 am

Curved hand grip for 3b

Post by Mikebmiller » Fri Jun 29, 2018 9:43 am

I like the curved hand grip on my Lawler so much that I was wondering if if was possible to purchase an aftermarket grip that would fit a 3 b slide. It seems that if would be an easy thing to get, but I'm not sure where to start.
keybone
Posts: 8
Joined: Fri Apr 06, 2018 9:29 am

Re: Curved hand grip for 3b

Post by keybone » Fri Jun 29, 2018 9:27 pm

I know Roy is busy (building a horn for me!). Does he do smaller jobs like this?
doctortrombone
Posts: 63
Joined: Sat Apr 21, 2018 4:50 pm
Location: Washington

Re: Curved hand grip for 3b

Post by doctortrombone » Sat Jun 30, 2018 4:07 am

It used to be fairly common to solder curved pieces to the existing braces. Any capable tech should be able to do that.
whitbey
Posts: 69
Joined: Fri Mar 23, 2018 9:44 am
Location: Rochester Michigan North of Detroit.
Contact:

Re: Curved hand grip for 3b

Post by whitbey » Wed Jul 04, 2018 1:54 pm

I have curved hand grips on my horns. There are photos in my profile. Kevin Powers from Michigan Musical made them. The heat of installing it requires realigning the slide. He is tops at that.
Also the stuff they use for auto wire loom covers makes a nice pad.
Bonearzt
Posts: 107
Joined: Thu Mar 22, 2018 7:40 am
Location: My Dungeon of Hell....Actually Texas
Contact:

Re: Curved hand grip for 3b

Post by Bonearzt » Wed Jul 04, 2018 2:24 pm

Kanstul sells a curved brace assembly that could easily be adapted with a little work.
Also some stuff called plastimorph/instamorph that is easily formed & attached to a hand slide.

Jupiter has a plastic grip on their student horns that could probably be adapted to a small bore horn.


Eric
Eric Edwards
Professional Instrument Repair
972.795.5784

"If you must choose between two evils, choose the one you haven't tried yet."
"Rather fail with honor than succeed by fraud." -Sophocles
MalecHeermans
Posts: 13
Joined: Mon Apr 23, 2018 6:40 pm

Re: Curved hand grip for 3b

Post by MalecHeermans » Wed Jul 11, 2018 12:53 pm

This doesn't address the OP because it's currently limited to large bore horns and basses, but I thought it was really interesting.

http://wisegrip.com/about-section/

Anyone get to try one of these yet?
Post Reply

Return to “Modification & Repair”