Minimizing noise from rotary valve linkage

Post Reply
AndrewMeronek
Posts: 972
Joined: Fri Mar 30, 2018 6:09 pm
Location: Detroit area
Contact:

Minimizing noise from rotary valve linkage

Post by AndrewMeronek »

By "linkage", I'm talking about the adjustable part in-between the thumb/finger rest and the rotary valve itself. This makes a separate "click" noise from the valve hitting bumpers. What are some ways to deal with that noise, or are some manufacturers better about their linkage designs and minimizing noise from them?
“All musicians are subconsciously mathematicians.”

- Thelonious Monk
User avatar
Burgerbob
Posts: 4526
Joined: Mon Apr 23, 2018 8:10 pm
Location: LA
Contact:

Re: Minimizing noise from rotary valve linkage

Post by Burgerbob »

Tight tolerances with well made parts.

Usually things are making noise because they have worn out to some degree and play has been introduced- sometimes from bad design, sometimes because the user hasn't kept them lubricated.
Aidan Ritchie, LA area player and teacher
User avatar
spencercarran
Posts: 626
Joined: Sat Oct 17, 2020 1:02 pm
Location: Chicago

Re: Minimizing noise from rotary valve linkage

Post by spencercarran »

Some manufacturers are indeed better (or worse). Heavy oil like Hetman 15 can help the Bach style linkages with frequent application. For my very worn Holton ball joint linkages I use tuning slide grease as a space filler and then top off with Hetman 15 as needed.
User avatar
hyperbolica
Posts: 2792
Joined: Fri Mar 23, 2018 7:31 am

Re: Minimizing noise from rotary valve linkage

Post by hyperbolica »

Replace it with a string linkage. Quieter, adjustable, more reliable.
AndrewMeronek
Posts: 972
Joined: Fri Mar 30, 2018 6:09 pm
Location: Detroit area
Contact:

Re: Minimizing noise from rotary valve linkage

Post by AndrewMeronek »

hyperbolica wrote: Wed Dec 23, 2020 2:11 pm Replace it with a string linkage. Quieter, adjustable, more reliable.
This depends on where the spring is.
“All musicians are subconsciously mathematicians.”

- Thelonious Monk
User avatar
harrisonreed
Posts: 4489
Joined: Fri Aug 17, 2018 12:18 pm
Location: Fort Riley, Kansas
Contact:

Re: Minimizing noise from rotary valve linkage

Post by harrisonreed »

O-rings up between the ball joints and the arms itself
hornbuilder
Posts: 854
Joined: Wed May 02, 2018 9:20 pm

Re: Minimizing noise from rotary valve linkage

Post by hornbuilder »

What brand is the instrument?
Matthew Walker
Owner/Craftsman, M&W Custom Trombones, LLC, Jackson, Wisconsin.
Former Bass Trombonist, Opera Australia, 1991-2006
AndrewMeronek
Posts: 972
Joined: Fri Mar 30, 2018 6:09 pm
Location: Detroit area
Contact:

Re: Minimizing noise from rotary valve linkage

Post by AndrewMeronek »

hornbuilder wrote: Wed Dec 23, 2020 5:32 pm What brand is the instrument?
For me, a Getzen and a Shires. I know it's the linkage because putting my finger on it while activating the valve dampens the sound.
“All musicians are subconsciously mathematicians.”

- Thelonious Monk
hornbuilder
Posts: 854
Joined: Wed May 02, 2018 9:20 pm

Re: Minimizing noise from rotary valve linkage

Post by hornbuilder »

Okay. So the issue could be worn/loose ball joints. How old are the horns?

For the Getzen, you could replace the ball joints with authentic MINIBAL ball joints from Germany (assuming it doesn't have them, they aren't OEM) Make sure the little "Jam Nuts" are tight, too. If they're missing, then they should be replaced.

For the Shires, have you tried a heavy oil on the ball joints? They do need lubrication to keep them quiet and long lasting.
Matthew Walker
Owner/Craftsman, M&W Custom Trombones, LLC, Jackson, Wisconsin.
Former Bass Trombonist, Opera Australia, 1991-2006
User avatar
greenbean
Posts: 1784
Joined: Fri Mar 23, 2018 6:14 pm
Location: San Francisco

Re: Minimizing noise from rotary valve linkage

Post by greenbean »

Use generous amounts of lube at every point of motion. Then do it again. And a third time. Seriously, lots of oil - of the right type!
Tom in San Francisco
Currently playing...
Bach Corp 16M
Many French horns
User avatar
TriJim
Posts: 63
Joined: Sun Mar 25, 2018 3:42 pm
Location: SouthCentral Pennsylvania

Re: Minimizing noise from rotary valve linkage

Post by TriJim »

My Bach A47 MLR makes noise when the valve is released and the stop hits the rubber bumper. I'm using the Bach specified bumper (provided by Hickey's), but the rubber becomes firm soon after they are placed on the horn (which contributes to the noise). Any suggestion on replacement bumpers that are softer/quieter and maintain their 'softness?'
Elow
Posts: 1791
Joined: Mon Mar 02, 2020 6:18 am

Re: Minimizing noise from rotary valve linkage

Post by Elow »

I have the same problem with both my shires, sounds like tapping mouthpieces together every time i use either of my valves
bassboy
Posts: 76
Joined: Wed Jan 02, 2019 1:38 pm

Re: Minimizing noise from rotary valve linkage

Post by bassboy »

Elow wrote: Thu Dec 24, 2020 3:26 pm I have the same problem with both my shires, sounds like tapping mouthpieces together every time i use either of my valves
I've had success taking apart the linkage, cleaning it with alcohol and soapy water, then drying it all out. Then put it back together, tighten everything down as much as you can. Then oil. If the sounds don't stop after that, take it to a good tech and have them cut some new bumpers out of softer rubber.
Lastbone
Posts: 46
Joined: Wed May 15, 2019 4:56 pm
Location: Galena IL

Re: Minimizing noise from rotary valve linkage

Post by Lastbone »

I had a noisy linkage on by 42B. I took it apart and packed the miniball fittings with white lithium grease including coating the screws (which were a bit loose in the holes) and then backed the fittings with little white nylon washers from Lowe's (about 3 cents each). The fix has been perfect for two years.
Elow
Posts: 1791
Joined: Mon Mar 02, 2020 6:18 am

Re: Minimizing noise from rotary valve linkage

Post by Elow »

For older 42s i always just replace the screw part with rubber, it’s silent and works so much better than the metal part
pmeiden
Posts: 26
Joined: Mon Jul 30, 2018 12:23 pm
Location: White Plains, NY

Re: Minimizing noise from rotary valve linkage

Post by pmeiden »

hornbuilder wrote: Wed Dec 23, 2020 6:44 pm For the Getzen, you could replace the ball joints with authentic MINIBAL ball joints from Germany (assuming it doesn't have them, they aren't OEM) Make sure the little "Jam Nuts" are tight, too. If they're missing, then they should be replaced.
Hi Matthew — regarding the authentic MINIBALs — do you have a recommendation on where a non-tech can purchase them?

Thanks
User avatar
paulyg
Posts: 684
Joined: Thu May 17, 2018 12:30 pm

Re: Minimizing noise from rotary valve linkage

Post by paulyg »

The minibal linkages have little nylon washers/bushings that eliminate noise and the binding you get with metal-on-metal contact.

IMO that's the only way to go with a mechanical linkage- otherwise a string linkage is superior in every way.
Paul Gilles
Aerospace Engineer & Trombone Player
Bonearzt
Posts: 715
Joined: Thu Mar 22, 2018 7:40 am
Location: My Dungeon of Hell....Actually Texas
Contact:

Re: Minimizing noise from rotary valve linkage

Post by Bonearzt »

One area not mentioned for noise is the stop arm!!

If it's loose on the rotor spindle, it will clank even with the retaining screw secure!!
A quick, GENTLE squeeze in a vise will secure it nicely.
Eric Edwards
Professional Instrument Repair
972.795.5784

"If you must choose between two evils, choose the one you haven't tried yet."
"Rather fail with honor than succeed by fraud." -Sophocles
Posaunus
Posts: 3424
Joined: Fri Mar 23, 2018 9:54 pm
Location: California

Re: Minimizing noise from rotary valve linkage

Post by Posaunus »

paulyg wrote: Fri Feb 05, 2021 1:40 pm The minibal linkages have little nylon washers/bushings that eliminate noise and the binding you get with metal-on-metal contact.

IMO that's the only way to go with a mechanical linkage - otherwise a string linkage is superior in every way.
:good:
Amconk
Posts: 233
Joined: Thu Jun 14, 2018 11:30 am
Location: 97524

Re: Minimizing noise from rotary valve linkage

Post by Amconk »

I had a shires that was clanky from day one I went and got a big fat rubber o-ring from the hardware store and custom cut some new bumpers. Quieted it right down.
Michael Conkey
Southern Oregon Trombonist

-Besson Be944 Sovereign with Hagmann
-Holton TR-140 “monster” valve
-Modified Schiller 7B clone
-King 4B with custom bell
-Jin Bao Alto
Fridge
Posts: 118
Joined: Wed Apr 04, 2018 9:33 am

Re: Minimizing noise from rotary valve linkage

Post by Fridge »

I replaced my rubber bumpers on my Shires with cork. No more noise.

Fridge
Blenky
Posts: 39
Joined: Thu Oct 24, 2019 5:11 pm
Location: UK

Re: Minimizing noise from rotary valve linkage

Post by Blenky »

harrisonreed wrote: Wed Dec 23, 2020 4:40 pm O-rings up between the ball joints and the arms itself
My Conn 88HT has a terribly noisy linkage, as Harrison offers, I created some small neoprene washers which fit either side of each ball joint and slathered them in old slide grease and they're now as good as gold!

But still not as quiet as the linkage on my much cheaper Rath R900.
Conn 88HTCL
Yamaha YSL-640
Rath R900

Doug Elliot XT Silver103, Lexan103, G, G8, G4, EUPH Lexan103, I, I8
Kbiggs
Posts: 1125
Joined: Sat Mar 24, 2018 11:46 am
Location: Vancouver WA

Re: Minimizing noise from rotary valve linkage

Post by Kbiggs »

hyperbolica wrote: Wed Dec 23, 2020 2:11 pm Replace it with a string linkage. Quieter, adjustable, more reliable.
I will have my tech Graham Middleton do this to my 50B soon. He’s also going to replace the Kanstul CR valves with Instrument Innovations rotary valves. I’m looking forward to quiet, smooth, dependable action with a short throw. I still remember the old school Conn 71H and my old King 4B I used to play.
Kenneth Biggs
I have known a great many troubles, but most of them have never happened.
—Mark Twain (attributed)
Elow
Posts: 1791
Joined: Mon Mar 02, 2020 6:18 am

Re: Minimizing noise from rotary valve linkage

Post by Elow »

Kbiggs wrote: Mon Feb 08, 2021 9:55 am
hyperbolica wrote: Wed Dec 23, 2020 2:11 pm Replace it with a string linkage. Quieter, adjustable, more reliable.
I will have my tech Graham Middleton do this to my 50B soon. He’s also going to replace the Kanstul CR valves with Instrument Innovations rotary valves. I’m looking forward to quiet, smooth, dependable action with a short throw. I still remember the old school Conn 71H and my old King 4B I used to play.
I’ll buy those cr valves (:
User avatar
Bassclefstef
Posts: 16
Joined: Sun Aug 16, 2020 3:14 pm
Location: Mid-Michigan

Re: Minimizing noise from rotary valve linkage

Post by Bassclefstef »

I've had really good luck with Hetmann Ball Joint - I think it's lubricant No. 15. I'm pretty diligent with keeping everything clean too, I give the valves on both modular horns a bath probably every couple weeks.

KBiggs- unrelated, but- I played in a quartet in Graham in school! We did the Bourgeois quartet together, he played alto. I think he made my Shires slide, too, before I met him.
-Stefan Stolarchuk
Post Reply

Return to “Maintenance”