Conn#2 and #3 mouthpieces

Post Reply
bigbandbone
Posts: 588
Joined: Thu Jan 17, 2019 7:45 am

Conn#2 and #3 mouthpieces

Post by bigbandbone »

Does anyone know the difference between a Conn 2 and a Conn 3 mouthpiece?
User avatar
BGuttman
Posts: 5952
Joined: Thu Mar 22, 2018 7:19 am
Location: Cow Hampshire

Re: Conn#2 and #3 mouthpieces

Post by BGuttman »

2 is a little bigger.

Don't have exact measurements, though.
Bruce Guttman
Merrimack Valley Philharmonic Orchestra
"Almost Professional"
bigbandbone
Posts: 588
Joined: Thu Jan 17, 2019 7:45 am

Re: Conn#2 and #3 mouthpieces

Post by bigbandbone »

6 1/2 AL equivalent range?
User avatar
heinzgries
Posts: 231
Joined: Tue Apr 24, 2018 4:52 pm
Location: Heidelberg/germany

Re: Conn#2 and #3 mouthpieces

Post by heinzgries »

the Conn 3 throat is 6,4 mm
Posaunus
Posts: 3468
Joined: Fri Mar 23, 2018 9:54 pm
Location: California

Re: Conn#2 and #3 mouthpieces

Post by Posaunus »

I think Bruce has it backwards.

My Conn 3: ~25.0 mm Cup I.D,; 6.35mm throat (measured)

Conn 2 (per spec): ~24.5mm Cup I.D.; 6.35mm throat

So:
Conn 3 is sort of like a Bach 6¾C but with a deeper, more V-shaped cup and a larger throat;
Conn 2 is sort of like a Bach 7 but with a deeper, more V-shaped cup and a larger throat.

Apparently the elusive Conn Remington small-shank is larger yet than the Conn 3.
(Similar to the large-shank Remington: 25.65mm Cup I.D; 6.15mm throat?)
I am told these were supplied with the Conn 79H and 78H trombones.
If anyone has a small-shank Remington for sale, I'd like to own it!
bigbandbone
Posts: 588
Joined: Thu Jan 17, 2019 7:45 am

Re: Conn#2 and #3 mouthpieces

Post by bigbandbone »

Thanks!
Doubler
Posts: 368
Joined: Mon Jan 07, 2019 8:56 pm

Re: Conn#2 and #3 mouthpieces

Post by Doubler »

Conn Loyalist has info on both Precision https://cderksen.home.xs4all.nl/ConnMpcPrecision.html and Improved Precision https://cderksen.home.xs4all.nl/ConnMpc ... ision.html mouthpieces. There does not appear to be a linear comparison among Conn mouthpieces; each number designation has a different character and purpose, rather than going from step to step to step, as we see (sometimes incorrectly) in other brands.
Current instruments:
Olds Studio trombone, 3 trumpets, 1 flugelhorn, 1 cornet, 1 shofar, 1 keyboard

Previous trombones:
Selmer Bundy, Marceau
Posaunus
Posts: 3468
Joined: Fri Mar 23, 2018 9:54 pm
Location: California

Re: Conn#2 and #3 mouthpieces

Post by Posaunus »

Conn Loyalist / Derksen's not much help, since it refers only to mouthpieces produced from ~1932 to ~1964. Conn was likely producing the Conn 3 more recently than that - I own one and have played another - probably from no earlier than the mid 70s (though I don't know for sure). At any rate, the information clearly shows that the larger Conn tenor trombone mouthpieces had higher numbers (i.e, that a Conn 3 is larger than a Conn 2). As previously noted, the Conn 3 has a cup I.D. of about 25.0 mm, a fairly deep v-shaped cup, and a 6.35mm throat (larger than Bach mouthpieces of similar size).

The more recent Conn tenor trombone mouthpieces seem to follow the Bach conventions - I have a Conn 12C and a Conn 7C that are similar to their Bach counterparts.
Post Reply

Return to “Mouthpieces”