Selmer Bolero counter weight removal?

Post Reply
Arvopart17
Posts: 249
Joined: Thu Jul 02, 2020 11:54 am
Location: New Hampshire

Selmer Bolero counter weight removal?

Post by Arvopart17 »

Anyone have experience taking these off? It looks like it’s a three piece screw on weight, but I can’t get it to budge. No sticker. Is this just something that needs some penetrating oil and muscle? It may not have moved since the 70’s :)
You do not have the required permissions to view the files attached to this post.
djkennedy
Posts: 360
Joined: Sun Apr 15, 2018 11:16 am

Re: Selmer Bolero counter weight removal?

Post by djkennedy »

Knurled edge is the ticket counter clockwise
Oil it up let sit
Gently tap s rawhide mallet
Ez like unscrew
Last resort
Vice grips
Arvopart17
Posts: 249
Joined: Thu Jul 02, 2020 11:54 am
Location: New Hampshire

Re: Selmer Bolero counter weight removal?

Post by Arvopart17 »

Thanks DJ, I’ll let you know how it goes
OneTon
Posts: 402
Joined: Tue Nov 02, 2021 11:44 am

Re: Selmer Bolero counter weight removal?

Post by OneTon »

I have used Marvel Mystery Oil to pickle slides. It never damaged any lacquer and it may have better penetration than household 3 in 1. Read the label before applying Liquid Wrench or other more exotic penetrating oils. Multiple applications over a week or two may be called for.

A repair technician may be able to apply some heat to help free it up.
Richard Smith
Wichita, Kansas
OneTon
Posts: 402
Joined: Tue Nov 02, 2021 11:44 am

Re: Selmer Bolero counter weight removal?

Post by OneTon »

The repair technician also has soft jawed pliers and a calibrated forearm to swing the mallet with. He or she may shore up the offending counterweight with a block of wood and perhaps thin felt to help reduce damage to the brace.
Richard Smith
Wichita, Kansas
User avatar
hyperbolica
Posts: 2792
Joined: Fri Mar 23, 2018 7:31 am

Re: Selmer Bolero counter weight removal?

Post by hyperbolica »

I have one of those rubber strap wrenches I use for situations like this. Lots of torque, no damage.
User avatar
Burgerbob
Posts: 4528
Joined: Mon Apr 23, 2018 8:10 pm
Location: LA
Contact:

Re: Selmer Bolero counter weight removal?

Post by Burgerbob »

Judging by the looks of the weight, it matters more than the horn, right? I'd just hacksaw the brace above and below, no damage to the weight this way. :pant:
Aidan Ritchie, LA area player and teacher
Arvopart17
Posts: 249
Joined: Thu Jul 02, 2020 11:54 am
Location: New Hampshire

Re: Selmer Bolero counter weight removal?

Post by Arvopart17 »

Actually, I quite like the horn, but it’s very back heavy. It’s a bolero with an F attachment - there’s no need for the weight. It has a super focused/projecting sound right now, I’m thinking taking the weight off may dial that back a little too.
Estraven
Posts: 79
Joined: Wed May 05, 2021 7:53 am
Location: Northwest Florida, USA

Re: Selmer Bolero counter weight removal?

Post by Estraven »

Having owned one of these (Largo, actually), DJ is correct, just unscrew the knurled part counterclockwise. If its stuck I’d use a small strap wrench.
Arvopart17
Posts: 249
Joined: Thu Jul 02, 2020 11:54 am
Location: New Hampshire

Re: Selmer Bolero counter weight removal?

Post by Arvopart17 »

Got it! WD40 and some patience - thank you everyone for the assist.
You do not have the required permissions to view the files attached to this post.
User avatar
Cotboneman
Posts: 199
Joined: Fri Jul 27, 2018 4:16 pm
Location: Tucson, AZ
Contact:

Re: Selmer Bolero counter weight removal?

Post by Cotboneman »

Glad you got it off. That WD40 is some kind of miracle elixir! :lol:

I owned a straight Bolero in the 1980's and had trouble with the counterweight as well. On that horn it was loose and rattled at certain partials, which was very annoying. I didn't think about oiling it back then but instead just took it to a shop, which remedied the problem. Now the thin lacquer coat on the horn which wore though very quickly and turned my neck and hands green, well that's a story for another day!
Arvopart17
Posts: 249
Joined: Thu Jul 02, 2020 11:54 am
Location: New Hampshire

Re: Selmer Bolero counter weight removal?

Post by Arvopart17 »

It’s funny how just 6 additional ounces can make your arm feel like it’s going to fall off after a while. The horn plays great without the weight now.
Stustang05
Posts: 9
Joined: Thu Mar 10, 2022 8:40 pm

Re: Selmer Bolero counter weight removal?

Post by Stustang05 »

Do you still have this counter weight and if so, are you interested in selling it?
User avatar
hyperbolica
Posts: 2792
Joined: Fri Mar 23, 2018 7:31 am

Re: Selmer Bolero counter weight removal?

Post by hyperbolica »

Just for future reference, strap wrench. Get a couple. Never use vice grips again. I use them on DE mouthpieces, valve caps, pickle jars... Very handy, and don't destroy stuff.
Arvopart17
Posts: 249
Joined: Thu Jul 02, 2020 11:54 am
Location: New Hampshire

Re: Selmer Bolero counter weight removal?

Post by Arvopart17 »

Sorry, it’s not with me anymore.
Stustang05
Posts: 9
Joined: Thu Mar 10, 2022 8:40 pm

Re: Selmer Bolero counter weight removal?

Post by Stustang05 »

Thanks for letting me know.
MBeal
Posts: 46
Joined: Mon Nov 30, 2020 8:06 am
Location: College Station, TX

Re: Selmer Bolero counter weight removal?

Post by MBeal »

hyperbolica wrote: Thu Jan 12, 2023 6:48 pm Just for future reference, strap wrench. Get a couple. Never use vice grips again. I use them on DE mouthpieces, valve caps, pickle jars... Very handy, and don't destroy stuff.
That's really handy advice. Thanks!
Post Reply

Return to “Instruments”