Page 1 of 1

Plumbers...

Posted: Tue Mar 28, 2017 12:31 pm
by ttf_anonymous
We've talked plumbing before.... anyhow, I tore out my bathroom.

Took out floor & joist (was standing on dirt).
Took out ceiling (blown in insulation and all).
Stripped walls to studs...
Tore it ALL out.

Put in new joist, subfloor, backerboard, framed in ceiling, added new light/fan and duct work, new insulation.
put in new 4 pc tub, new faucet, new drain line.
New electrical, plugs, switches.
New sheet rock on walls & ceiling (2 vapor barriers in ceiling).
Putty, sanded, painted....

Done it all myself, with a little help from my 3 sons, as they could spare a moment (which wasn't much, since they have their own families)...

Still have the other side of the batroom to finish - but 3/4ths is done now.
So far, about $3,500 invested vs $10-15K to a contractor (or more).
Still more to do, but it's taking shape.

Image

Image


T.

Plumbers...

Posted: Tue Mar 28, 2017 12:59 pm
by ttf_timothy42b
Nice.

How long did it take you?

Plumbers...

Posted: Tue Mar 28, 2017 1:28 pm
by ttf_robcat2075
Looks great. 

I presume the torchiere light is just for while you are working and not part of the finished plan.

Plumbers...

Posted: Tue Mar 28, 2017 11:30 pm
by ttf_Doug Elliott
Nice, it sounds like you did a LOT of work.

After all of my construction a few years ago I still have an unopened outside mount Fantech exhaust fan that I intended to install under my porch to ventilate the basement bathroom.  I ended up using a Fantech inline fan instead.  The whole idea of the Fantech line is that they're very quiet and remotely mounted instead of noisy and in the bathroom ceiling.

In case anybody's interested in it, it's a PBW 110 which mounts outside on the wall and you run a duct to it.

Plumbers...

Posted: Wed Mar 29, 2017 5:35 am
by ttf_anonymous
Quote from: timothy42b on Mar 28, 2017, 12:59PMNice.

How long did it take you?
Thanks.
Been "piddling" at it, for a about 6 weeks (on Sat's and afternoons a few hours a day).
Main objective took 3 days - tear out everything, and get it dried back in (I was standing on dirt, after we took out the flooring and joist). From there, the main rush was getting the tub in (another 2 days), and after that I just piddled (electrical, framing, insulation, sheet rock, bunch of little stuff). I hate sheetrock & painting.

Quote from: robcat2075 on Mar 28, 2017, 01:28PMLooks great. 
I presume the torchiere light is just for while you are working and not part of the finished plan.
Thanks.
And that would be correct!  Image Image
It was replace by a new sink light (installed last night):

Image

I'll be adding a new adjustable (double) Shower curtain rod a little later on:
https://www.lowes.com/pd/Moen-60-in-Brushed-Nickel-Curved-Adjustable-Double-Shower-Curtain-Rod/50171027
I had considered putting a shower door on, but they cost as much as the whole tub did (and I don't like to looks of a door)

Plumbers...

Posted: Wed Mar 29, 2017 5:52 am
by ttf_anonymous
Quote from: Doug Elliott on Mar 28, 2017, 11:30PMNice, it sounds like you did a LOT of work.

After all of my construction a few years ago I still have an unopened outside mount Fantech exhaust fan that I intended to install under my porch to ventilate the basement bathroom.  I ended up using a Fantech inline fan instead.  The whole idea of the Fantech line is that they're very quiet and remotely mounted instead of noisy and in the bathroom ceiling.

In case anybody's interested in it, it's a PBW 110 which mounts outside on the wall and you run a duct to it.
It was a lot of work, for sure.

The fan/light I went with, was similar to this one:
https://www.lowes.com/pd/Broan-0-3-Sone-110-CFM-White-Bathroom-Fan-with-Light-ENERGY-STAR/4311820
and it's pretty quiet.

The original fan did not work well, and I found out why.
The previous owner of the house, didn't run any duct work. It was vented into the attic space.
Then apparently later, they had insulation blew in on top of it.... duhhh, real smart.
So of course when I took the ceiling out, we had a floor full of blown in insulation to dispose of, then I had to totally reframe the ceiling. I put up 2 vapor barriers in the ceiling (1 on top before I framed it up, and one on bottom after I framed it up and then covered with sheet rock - a little over kill maybe).
To run the duct work, was a little challenging. To get outside with the venting, I would have to go out the metal roof, or bring the duct down inside the framing of the back wall to exit out the side of the house.
I had to think outside the box, so.... I ran the duct from the light/fan to the back/exterior wall, then came inside the wall with a diverter box (for a dryer!) - and it worked like a charm, and I went out the back wall with the vent. Check this out:
https://www.lowes.com/pd/IMPERIAL-24-in-to-45-in-Adjustable-Periscope-Dryer-Vent/4753386
The one I used was actually a little thinker.
Then I exited with this louvered vent: https://www.lowes.com/pd/Builders-Edge-4-in-Plastic-Louvered-Dryer-Vent-Cap/3819157
And capped it with this guard: https://www.lowes.com/pd/Lambro-4-in-Plastic-Pest-Guard-Dryer-Vent-Cap/4566308
Kinda funny how dryer venting parts, works so well as exhaust fan venting parts.

Then I covered all that up, with 3 layers of insulation overhead, and new insulation inside the exterior wall.

Yea, it's been a VERY involved project... Image
T.

Plumbers...

Posted: Wed Mar 29, 2017 6:04 am
by ttf_crazytrombonist505
Very nicely done! Sometimes it's nice to be a "do-it-yourselfer" to save yourself some money, provided you know what you are doing, which you do.  Image

Plumbers...

Posted: Wed Mar 29, 2017 6:28 am
by ttf_anonymous
Quote from: crazytrombonist505 on Mar 29, 2017, 06:04AMVery nicely done! Sometimes it's nice to be a "do-it-yourselfer" to save yourself some money, provided you know what you are doing, which you do.  Image
Thanks.  Image
I'm just too particular, so it takes me a while (that's the downside), but I know its done right. Image

One thing about it - electrical, I did it the way I wanted it. I moved my light switches and plugs up higher on the walls. With 2 grandsons, It helps keep them a little safer (and I don't have to bend over so far to plug something in Image )

The subfloor... I used Advan Tech. My nephew had a short pc left over from a build, that had been laying outside for 2 years in the weather. It still looks new! So I bought some, then put backer board on top of it. I sealed the bottom of the wall where it meets the backer board - and then painted 3 coats of water proof sealant over it. I'll be using Vinyl Plank flooring, with a waterproof membrane under it as well (over kill, yea), and it'll be water tight. The Vinyl Plank Flooring looks, and feels like hardwood, and is easy clean up and very tough/scratch resistant. 

The drywall, is the purple stuff - mold and water resistant. Only problem, it took 4 coats of paint to get it covered!
 
 
T.

Plumbers...

Posted: Wed Mar 29, 2017 7:19 am
by ttf_timothy42b
Six weeks?  That's not long for a home project.  I've seen people take a year at something like this, and not do as well as you did. 

Plumbers...

Posted: Wed Mar 29, 2017 8:14 am
by ttf_harrison.t.reed
It looks great!

Plumbers...

Posted: Wed Mar 29, 2017 8:35 am
by ttf_anonymous
Quote from: timothy42b on Mar 29, 2017, 07:19AMSix weeks?  That's not long for a home project.  I've seen people take a year at something like this, and not do as well as you did. 

My wife seems to think I should have been done 2 weeks ago.  Image   Image
I still have the other side to do (toilet area), then put flooring down, and set sink.
And add trim, towel rack, shelf...

Quote from: harrison.t.reed on Mar 29, 2017, 08:14AMIt looks great!
Thanks!

Plumbers...

Posted: Wed Mar 29, 2017 9:32 am
by ttf_Orffbone
That looks good, Troy; real nice job.  Not bad for a bone playin' duck hunter   Image

Plumbers...

Posted: Wed Mar 29, 2017 9:56 am
by ttf_anonymous
Quote from: Orffbone on Mar 29, 2017, 09:32AMThat looks good, Troy; real nice job.  Not bad for a bone playin' duck hunter   Image
Thanks David.
It used to be my day time job, years ago.
Now I'm a professional jack of all trades, and master of none.  Image

T.


Plumbers...

Posted: Wed Mar 29, 2017 9:56 am
by ttf_anonymous
Quote from: Orffbone on Mar 29, 2017, 09:32AMThat looks good, Troy; real nice job.  Not bad for a bone playin' duck hunter   Image
Thanks David.
It used to be my day time job, years ago.
Now I'm a professional jack of all trades, and master of none.  Image

T.