Dating a Shires Horn
-
- Posts: 342
- Joined: Thu Mar 29, 2018 7:51 pm
- Location: Maryland
Dating a Shires Horn
Looking for a little help........
I purchased a used Shires horn. (Terrific horn). I would like to learn the date of manufacture. The serial number is 37XX. If this information is on the Net, I was unable to find it. I also tried twice to contact Shires with this question, but I got no response.
I purchased a used Shires horn. (Terrific horn). I would like to learn the date of manufacture. The serial number is 37XX. If this information is on the Net, I was unable to find it. I also tried twice to contact Shires with this question, but I got no response.
- Altposaune
- Posts: 10
- Joined: Mon Nov 05, 2018 5:07 pm
- Location: The Intermountain West
Re: Dating a Shires Horn
Is your "serial number" on the valve section? For what it's worth I have two Shires valve sections: one bought from the factory Sept. 2003 numbered 12xx and one bought new from a dealer June, 2011 numbered 62xx. I looked into the mystery of Shires serial numbers a few years ago and got about as far as you have. Good luck.
-J
-J
-
- Posts: 342
- Joined: Thu Mar 29, 2018 7:51 pm
- Location: Maryland
Re: Dating a Shires Horn
Thanks for replying, Josh.
Still no response from Shires. Very disappointing.
My horn is a small tenor .500 bore.
Based on your information, if all Shires trombones are in the same serial number sequence (?) I can estimate about 2005 - 2006 for my horn. That's a big help. Thanks again.
Still no response from Shires. Very disappointing.
My horn is a small tenor .500 bore.
Based on your information, if all Shires trombones are in the same serial number sequence (?) I can estimate about 2005 - 2006 for my horn. That's a big help. Thanks again.
-
- Posts: 342
- Joined: Thu Mar 29, 2018 7:51 pm
- Location: Maryland
Re: Dating a Shires Horn
Update here.
Finally heard from Shires. Email from somebody "in sales." No name.
The info is that ten years ago Shires adopted a new serial numbering system, and there are no remaining records of serial numbers for horns prior to that time. My horn's serial number format does not conform with the new format, so Shires can only confirm that it was made prior to the change, or at least ten years ago. Of course, that doesn't explain why Altposaune (above post) bought a new Shires horn with an "old" serial number in June of 2011, unless maybe it sat unsold on a dealer's shelf for a long time. I'm very happy that my horn has the beautiful Sherry Huntley hand engraved bell instead of the newer laser engraving. I wonder when Sherry stopped engraving the Shires horns?
Finally heard from Shires. Email from somebody "in sales." No name.
The info is that ten years ago Shires adopted a new serial numbering system, and there are no remaining records of serial numbers for horns prior to that time. My horn's serial number format does not conform with the new format, so Shires can only confirm that it was made prior to the change, or at least ten years ago. Of course, that doesn't explain why Altposaune (above post) bought a new Shires horn with an "old" serial number in June of 2011, unless maybe it sat unsold on a dealer's shelf for a long time. I'm very happy that my horn has the beautiful Sherry Huntley hand engraved bell instead of the newer laser engraving. I wonder when Sherry stopped engraving the Shires horns?
- MalecHeermans
- Posts: 126
- Joined: Mon Apr 23, 2018 6:40 pm
- Location: Brooklyn
- Contact:
Re: Dating a Shires Horn
I just purchased an earlier Shires small bore. It's a regular weight brass .508 slide and a 7.75" 2RLW bell. I purchased it from the original owner who got it from Shires in 2003 - it was in the classifieds here.
Serial number is 26xx, but it has the laser engraving with the "S.E. Shires USA" mark.
I'm surprised about the answer to the serial number question. Shires just posted on facebook about building their 10,000th trombone and talked about the serial number:
I'm interested to know how that jibes with the two different serial number systems.
Serial number is 26xx, but it has the laser engraving with the "S.E. Shires USA" mark.
I'm surprised about the answer to the serial number question. Shires just posted on facebook about building their 10,000th trombone and talked about the serial number:
I'm interested to know how that jibes with the two different serial number systems.
-
- Posts: 61
- Joined: Fri Mar 23, 2018 4:22 am
- Location: Edinburgh
Re: Dating a Shires Horn
Resurrecting an old thread here but I've just bought a Shires Tru-Bore bass with the serial number 35XX. Shires replied very quickly to an email saying it was an 'early' model for which they had no records but the person who answered had a trombone from 2012 that was in the 69XX range.
So with the info here it looks like mine might be around 2005.
Ronnie
So with the info here it looks like mine might be around 2005.
Ronnie
Shires Tru-Bore (Bb/F/Gb/D)
Bach Stradivarius 42 (unlacquered bell)
Excel Bb/F/Gb/D (Chinese made Yamaha YBL-613G clone)
Bach Stradivarius 42 (unlacquered bell)
Excel Bb/F/Gb/D (Chinese made Yamaha YBL-613G clone)
- paulyg
- Posts: 684
- Joined: Thu May 17, 2018 12:30 pm
Re: Dating a Shires Horn
I went on a few dates with a nice tenor, but she and I didn't get along and parted ways. Still friends and talk time to time, though.
Paul Gilles
Aerospace Engineer & Trombone Player
Aerospace Engineer & Trombone Player
- tombone21
- Posts: 206
- Joined: Tue Nov 13, 2018 11:19 pm
Re: Dating a Shires Horn
My advice is just to take it slow, listen twice as much as you speak, and don't believe what your friends say, they weren't there man.
-
- Posts: 1
- Joined: Mon Oct 16, 2023 12:40 pm
Re: Dating a Shires Horn
Bought mine in 2007. 46xx
-
- Posts: 53
- Joined: Tue Jul 26, 2022 7:48 am
- Location: Providence, RI
- Contact:
Re: Dating a Shires Horn
Hi Everyone,
This topic has come up on more than one occasion and I hope to be able to help. We do have a chunk of records that are missing, but we should be able to ball park approximately what serial numbers were stamped in that time period. What records we do have are from a few different databases we have used over the years, including a few thousand logged in some notebooks. In the upcoming new year I hope to build a more comprehensive list and hopefully an online location where this info can be accessed.
2/22/2006 -- Serial #3700 built
4/21/2006 -- Serial #3799 built
This topic has come up on more than one occasion and I hope to be able to help. We do have a chunk of records that are missing, but we should be able to ball park approximately what serial numbers were stamped in that time period. What records we do have are from a few different databases we have used over the years, including a few thousand logged in some notebooks. In the upcoming new year I hope to build a more comprehensive list and hopefully an online location where this info can be accessed.
2/22/2006 -- Serial #3700 built
4/21/2006 -- Serial #3799 built
Last edited by JKBone85 on Wed Oct 18, 2023 12:00 pm, edited 2 times in total.
- tjonz
- Posts: 48
- Joined: Sun Apr 01, 2018 7:02 am
Re: Dating a Shires Horn
My Shires horn, serial number 24xx, was purchased from Steve at the factory in 2003.
-
- Posts: 429
- Joined: Wed Jul 11, 2018 1:51 pm
- Location: New Albany, Ohio
Re: Dating a Shires Horn
Unfortunate how records end up lost. I bought my Shires Q in 22 for an unbelievable low price. Would have been looking for cops if I bought it on the street but was at a major university's trombone day. I was curious about the build date and the answer was before 2014. Serial is 603x.
Guess it was a demo hanging at the store for eight years.
Guess it was a demo hanging at the store for eight years.
Dave
2020ish? Shires Q30GR with 2CL
1982 King 607F with 13CL
Yamaha 421G Bass with Christian Lindberg 2CL / Bach 1 1/2G
Bach Soloist with 13CL
1967 Olds Ambassador with 10CL
1957 Besson 10-10
Jean Baptiste EUPCOMS with Stork 4
2020ish? Shires Q30GR with 2CL
1982 King 607F with 13CL
Yamaha 421G Bass with Christian Lindberg 2CL / Bach 1 1/2G
Bach Soloist with 13CL
1967 Olds Ambassador with 10CL
1957 Besson 10-10
Jean Baptiste EUPCOMS with Stork 4
-
- Posts: 42
- Joined: Tue Jan 11, 2022 8:35 pm
- Location: Joisey
Re: Dating a Shires Horn
I heard she wasn't wrapped that tight.
![Surprised :o](./images/smilies/icon_e_surprised.gif)
Bach two 42BO's (silver & lacquer)
Bach LT16M (inspired by Bill Watrous)
Holton TR-181 Bass
King 3B
Yamaha 354 Tenor (early production)
Yamaha 321 Euphonium
Conn Baritone (really friggin' old)![Laughing :lol:](./images/smilies/icon_lol.gif)
Bach LT16M (inspired by Bill Watrous)
Holton TR-181 Bass
King 3B
Yamaha 354 Tenor (early production)
Yamaha 321 Euphonium
Conn Baritone (really friggin' old)
![Laughing :lol:](./images/smilies/icon_lol.gif)
-
- Posts: 53
- Joined: Tue Jul 26, 2022 7:48 am
- Location: Providence, RI
- Contact:
Re: Dating a Shires Horn
I did some digging through my files, and we received Q's 6000-6100 towards the end of 2020. Keep in mind with the Q's, the serial numbers account for the entirety of the Q line. For example, Q6034 is not a 30GR. Also, the Q line didn't come into existence until Eastman purchased Shires in 2014. There are some Eastman/Shires joint venture horns from pre Eastman ownership, but the Q's really didn't become a line until 2016, and we definitely hadn't built 6000 Q instruments by 2014. My educated estimate as to the age of your horn is it was probably built in the summer of 2020.walldaja wrote: ↑Thu Oct 19, 2023 7:17 am Unfortunate how records end up lost. I bought my Shires Q in 22 for an unbelievable low price. Would have been looking for cops if I bought it on the street but was at a major university's trombone day. I was curious about the build date and the answer was before 2014. Serial is 603x.
Guess it was a demo hanging at the store for eight years.
-
- Posts: 429
- Joined: Wed Jul 11, 2018 1:51 pm
- Location: New Albany, Ohio
Re: Dating a Shires Horn
Apparently the response I got from Shires wasn't based on any facts. Your estimate is probably much more accurate. Thanks.JKBone85 wrote: ↑Mon Apr 01, 2024 2:10 pmI did some digging through my files, and we received Q's 6000-6100 towards the end of 2020. Keep in mind with the Q's, the serial numbers account for the entirety of the Q line. For example, Q6034 is not a 30GR. Also, the Q line didn't come into existence until Eastman purchased Shires in 2014. There are some Eastman/Shires joint venture horns from pre Eastman ownership, but the Q's really didn't become a line until 2016, and we definitely hadn't built 6000 Q instruments by 2014. My educated estimate as to the age of your horn is it was probably built in the summer of 2020.walldaja wrote: ↑Thu Oct 19, 2023 7:17 am Unfortunate how records end up lost. I bought my Shires Q in 22 for an unbelievable low price. Would have been looking for cops if I bought it on the street but was at a major university's trombone day. I was curious about the build date and the answer was before 2014. Serial is 603x.
Guess it was a demo hanging at the store for eight years.
Dave
2020ish? Shires Q30GR with 2CL
1982 King 607F with 13CL
Yamaha 421G Bass with Christian Lindberg 2CL / Bach 1 1/2G
Bach Soloist with 13CL
1967 Olds Ambassador with 10CL
1957 Besson 10-10
Jean Baptiste EUPCOMS with Stork 4
2020ish? Shires Q30GR with 2CL
1982 King 607F with 13CL
Yamaha 421G Bass with Christian Lindberg 2CL / Bach 1 1/2G
Bach Soloist with 13CL
1967 Olds Ambassador with 10CL
1957 Besson 10-10
Jean Baptiste EUPCOMS with Stork 4
-
- Posts: 53
- Joined: Tue Jul 26, 2022 7:48 am
- Location: Providence, RI
- Contact:
Re: Dating a Shires Horn
If you are going by Custom serial numbers, 2014 is about when the early 6000’s came out, so the approximation is correct there, someone was just not looking in the right place. An understandable mistake.
- harrisonreed
- Posts: 4705
- Joined: Fri Aug 17, 2018 12:18 pm
- Location: Fort Riley, Kansas
- Contact:
Re: Dating a Shires Horn
With the custom horns, even if you go to the shop and piece it together there, the only thing you will have a distinct date for is the valve section, right? I wouldn't be surprised if there is a bell or slide deep in storage there from the early days, maybe some weird spec that never was paid in full, that might still wind up on a much newer valve once someone else orders the weird spec part again.
Seems kind of impossible to know for sure, especially when the date/serial is on the part potentially most likely to be replaced. How many valve conversions have been discussed here, where people replace the valve on their vintage horns? With this logic, boom, those Mt. Vernon's are now built in the year 2024 (obvs not, but maybe that was the only place with a serial number). "I upgraded my Trubore to a more conventional Shires rotor. Such an improvement!" Boom, your original bell spun by Steve is now built in the year 2024.
Do the bells, etc, have any distinguishing factors to help ID the date they were made?
Seems kind of impossible to know for sure, especially when the date/serial is on the part potentially most likely to be replaced. How many valve conversions have been discussed here, where people replace the valve on their vintage horns? With this logic, boom, those Mt. Vernon's are now built in the year 2024 (obvs not, but maybe that was the only place with a serial number). "I upgraded my Trubore to a more conventional Shires rotor. Such an improvement!" Boom, your original bell spun by Steve is now built in the year 2024.
Do the bells, etc, have any distinguishing factors to help ID the date they were made?
-
- Posts: 53
- Joined: Tue Jul 26, 2022 7:48 am
- Location: Providence, RI
- Contact:
Re: Dating a Shires Horn
Unless you are buying showroom stock, all of your components are made to order. The instances in which someone abandons an order in one way or another and we end up with an A-stock component without a home is very, very rare. There are a couple instances of prototype things that are hanging around, but those never became retail offerings. It is safe to assume if you bought a horn new from us, at least in the last 10 years, the non serialized components are very close to the same age as the valve section.harrisonreed wrote: ↑Tue Apr 02, 2024 6:42 am With the custom horns, even if you go to the shop and piece it together there, the only thing you will have a distinct date for is the valve section, right? I wouldn't be surprised if there is a bell or slide deep in storage there from the early days, maybe some weird spec that never was paid in full, that might still wind up on a much newer valve once someone else orders the weird spec part again.
Seems kind of impossible to know for sure, especially when the date/serial is on the part potentially most likely to be replaced. How many valve conversions have been discussed here, where people replace the valve on their vintage horns? With this logic, boom, those Mt. Vernon's are now built in the year 2024 (obvs not, but maybe that was the only place with a serial number). "I upgraded my Trubore to a more conventional Shires rotor. Such an improvement!" Boom, your original bell spun by Steve is now built in the year 2024.
Do the bells, etc, have any distinguishing factors to help ID the date they were made?
We do stamp the last 2 numbers of the production number for the handslide on the handslide to keep track of corresponding inners and outers, but the only serialized part we produce is the valve section. We can fairly accurately date most of the Shires valves built. The first few thousand were keep in hand written journals in a garage in the mid 90's, before moving to the tiny airport space in Hopedale. Since becoming part of Eastman, record keeping is much more detailed and technology based, and therefore accurate.
As for how to ID the age of a bell; I'm working on this. You can ball park based on engraving, and I'm working on putting a timeline of these engraving style changes together.
-
- Posts: 220
- Joined: Sat Mar 24, 2018 6:23 pm
- Location: Cincinnati, Ohio, USA
Re: Dating a Shires Horn
At least, they don't become retail offerings until they're sold.JKBone85 wrote: ↑Tue Apr 02, 2024 7:36 am
There are a couple instances of prototype things that are hanging around, but those never became retail offerings.
As for how to ID the age of a bell; I'm working on this. You can ball park based on engraving, and I'm working on putting a timeline of these engraving style changes together.
-
- Posts: 53
- Joined: Tue Jul 26, 2022 7:48 am
- Location: Providence, RI
- Contact:
Re: Dating a Shires Horn
True. I guess prototype is not the best description of the things hanging around. It's really better described as R&D results.Dennis wrote: ↑Tue Apr 02, 2024 8:40 pmAt least, they don't become retail offerings until they're sold.JKBone85 wrote: ↑Tue Apr 02, 2024 7:36 am
There are a couple instances of prototype things that are hanging around, but those never became retail offerings.
As for how to ID the age of a bell; I'm working on this. You can ball park based on engraving, and I'm working on putting a timeline of these engraving style changes together.
-
- Posts: 220
- Joined: Sat Mar 24, 2018 6:23 pm
- Location: Cincinnati, Ohio, USA
Re: Dating a Shires Horn
And you probably don't intend to make any additional versions of these things.
I own two of those prototypes/R&D results or whatever you want to call them. My tenor bell is a lightweight Type 5 bell spun on the TI mandrel. For me, it's magic--combining the best features of a Bach bell and a Conn bell. This bell caused me to question why I'd been a Bach guy all my adult life. My new bass bell is the BI Type 7 lightweight with a red brass tail and a gold brass flare. It's also an amazing bell that I'm still getting to know.
So thanks for making the results of your R&D available to us.
-
- Posts: 53
- Joined: Tue Jul 26, 2022 7:48 am
- Location: Providence, RI
- Contact:
Re: Dating a Shires Horn
Speaking of making things available, this post partially inspired us to do some spring cleaning recently and there will be a sale coming up with some truly blow out pricing on old stock mouthpieces, cases and other goodies. Just an early heads up for you all here on TC.Dennis wrote: ↑Wed Apr 03, 2024 7:43 amAnd you probably don't intend to make any additional versions of these things.
I own two of those prototypes/R&D results or whatever you want to call them. My tenor bell is a lightweight Type 5 bell spun on the TI mandrel. For me, it's magic--combining the best features of a Bach bell and a Conn bell. This bell caused me to question why I'd been a Bach guy all my adult life. My new bass bell is the BI Type 7 lightweight with a red brass tail and a gold brass flare. It's also an amazing bell that I'm still getting to know.
So thanks for making the results of your R&D available to us.
-
- Posts: 87
- Joined: Mon Apr 25, 2022 2:45 pm
- Location: Harrisburg, PA
Re: Dating a Shires Horn
Mine is 1757. Purchased from Steve in summer of 2003.
- meine
- Posts: 279
- Joined: Thu Feb 25, 2021 2:28 pm
Re: Dating a Shires Horn
I‘ve got a Shires tenor with serial number 4289. When was it produced exactly?