Page 1 of 1

Going digital: stands and holders?

Posted: Sun Dec 01, 2019 9:15 am
by Kbiggs
I’ve decided to convert to digital music as much as possible. I have a new iPad, ForScore, and the AirTurn Pro pedal. I play 95% classical and chamber music, if that makes a difference.

What kind of stand do most people use? A regular music stand? If so, how do you keep the iPad on the stand?

If you use a different stand, do you use a mic stand with an arm to hold the tablet? A dedicated straight stand like the goStand: https://store.airturn.com/collections/t ... blet-stand? Something else?

What kind of tablet holder? There are diagonal holders, large clip holders, and adjustable ones like Hercules and KMI.

Re: Going digital: stands and holders?

Posted: Wed Dec 04, 2019 5:33 am
by afugate
I use a collapsible boom mic stand. Lightweight, and I can adjust the boom to keep the stand out of the way when necessary to fit into cramped quarters.

I'm not especially satisfied with my current tablet holder, so I'll defer on that.

Oh, I found an old Prince tennis racket bag that I picked up for a buck. Works great to carry my large iPad and stand/holder. Also can fit either my tenor or bass stand. Slings over my shoulder. It's very handy, and has made for some fun comments when I show up to the gig. :lol:

--Andy in OKC

Re: Going digital: stands and holders?

Posted: Wed Dec 04, 2019 1:22 pm
by kingsk1117
I use a collapsible mic stand without the boom (looks similar to the goStand you mentioned) and screw-on a MANOS tablet holder purchased through AirTurn. It clamps my iPad Pro securely and still swivels easily to change from portrait to landscape if you need to do that due to size of the music. The only problem I have experienced with the MANOS is that if you rotate it too many times, the nut and bolt in the center loosens up and you have to disassemble it to get access to the nut to tighten things back up. But not that much of a big deal, now that I know what to look for and control. I use a hockey duffle bag from a sporting goods store to carry my stands and gear (I travel with a bass and tenor together).

Re: Going digital: stands and holders?

Posted: Fri Dec 06, 2019 12:02 pm
by timothy42b
I'm considering this too. I have a work issued iPad and like it but of course can't use that for the playing I do.

Do you like the iPad based tablets, or the Android? And the prices range all over the place, I'm wondering what options I need.

Re: Going digital: stands and holders?

Posted: Thu Feb 27, 2020 6:57 am
by ssking2b
I have a MANOS iPad holder, and goStand from airTurn. All works great and I can keep the case on my iPad.

Re: Going digital: stands and holders?

Posted: Thu Feb 27, 2020 10:43 am
by sacfxdx
goStand from AirTurn. https://caddiebuddy.com/ipad-holder-for-mic-stand/ - holder. holds each corner. comes with adapter for mic stand AND the extension arm.

I use a BlueBoard (https://www.ikmultimedia.com/products/i ... -blueboard) only because I already had it. A BlueTurn (https://www.ikmultimedia.com/products/i ... g-blueturn) would be better for a dedicated page turner as it is smaller.

Re: Going digital: stands and holders?

Posted: Thu Feb 27, 2020 7:29 pm
by Matt K
I have a K&M iPad stand and found that to be the best of the options when I was using Apple products for music.
timothy42b wrote: Fri Dec 06, 2019 12:02 pm I'm considering this too. I have a work issued iPad and like it but of course can't use that for the playing I do.

Do you like the iPad based tablets, or the Android? And the prices range all over the place, I'm wondering what options I need.

Don't neglect Windows tablets in this. MobileSheets is pretty good on both Android and Windows; the Surface tablets are great for this use and you can get used ones for a pretty reasonable price that are a few years old and, unlike Apple stuff, will let you install the most recent version of their OS on them. (e.g. if you were to buy an iPad 2 right now, unless you bought forScore a few years ago, you wouldn't be able to install it because it "requires" iOS 10+ and the max version for the iPad 2 is 9.x.x).

Re: Going digital: stands and holders?

Posted: Fri Feb 28, 2020 11:03 am
by bkessler
I actually just use a regular peak stand, as do most of the folks in my big band (mix of iPads, Microsoft surfaces, Boox, plus several on paper). I do this because I have a smaller iPad, and wasn’t sure how well in-stand stuff would work (wouldn’t be such a problem for classical), and it gives me a place to set paper music if I need it from time-to-time. That said, I mostly haven’t bought anything else because I didn’t want to spend more money.

But now I’m intrigued. People with Manos/Go-stand setups- a few questions:
Does in-stand playing work alright? Are you still able to read while playing in-stand?
How easy is it to raise and lower the setup for solos and such?
What happens if you get paper to read? Just quick scan it in?

Re: Going digital: stands and holders?

Posted: Fri Sep 02, 2022 2:52 pm
by kingsk1117
I normally use the regular low band fronts for playing in the big band, but the Manos/GoStand for everything else. When playing in the community band and the director passes out new paper music to read, I just rotate it sideways and then use the top spring-operated tablet holder to also grab the paper music. The problem comes when the part is 3 or more pages long.

Re: Going digital: stands and holders?

Posted: Sat Sep 03, 2022 7:14 am
by afugate
kingsk1117 wrote: Fri Sep 02, 2022 2:52 pm I normally use the regular low band fronts for playing in the big band, but the Manos/GoStand for everything else. When playing in the community band and the director passes out new paper music to read, I just rotate it sideways and then use the top spring-operated tablet holder to also grab the paper music. The problem comes when the part is 3 or more pages long.
Use the camera on your tablet to take pictures of the pages. I do this with ForScore and it works very well in a pinch for stuff that was just handed out. I use a dedicated scanner app but ForScore includes some built in scanning capability.

--Andy in OKC

Re: Going digital: stands and holders?

Posted: Sat Sep 03, 2022 8:47 am
by vetsurginc
afugate wrote: Sat Sep 03, 2022 7:14 am
kingsk1117 wrote: Fri Sep 02, 2022 2:52 pm I normally use the regular low band fronts for playing in the big band, but the Manos/GoStand for everything else. When playing in the community band and the director passes out new paper music to read, I just rotate it sideways and then use the top spring-operated tablet holder to also grab the paper music. The problem comes when the part is 3 or more pages long.
Use the camera on your tablet to take pictures of the pages. I do this with ForScore and it works very well in a pinch for stuff that was just handed out. I use a dedicated scanner app but ForScore includes some built in scanning capability.

--Andy in OKC
Descapresto or Peak with the iPad pro. I usually have time to scan in orchestra/symphonic band pieces. But for big bands we're always getting a last minute handout or "new book" with a ton of stuff I don't have scanned, so the regular stand is needed. PageFLip Butterfly.

Some places have Manhasset stands available (in varying states of repair/movement.

Re: Going digital: stands and holders?

Posted: Sun Sep 04, 2022 6:35 am
by afugate
vetsurginc wrote: Sat Sep 03, 2022 8:47 am Descapresto or Peak with the iPad pro. I usually have time to scan in orchestra/symphonic band pieces. But for big bands we're always getting a last minute handout or "new book" with a ton of stuff I don't have scanned, so the regular stand is needed. PageFLip Butterfly.

Some places have Manhasset stands available (in varying states of repair/movement.
Ahh. That makes sense.
--Andy in OKC

Re: Going digital: stands and holders?

Posted: Sun Apr 07, 2024 12:56 pm
by Geordie
Using low front big band stand with an iPad. I’d like to be able to adjust the height and, if possible, the angle, of the iPad on the low front stand. Propping it on my spectacle case isn’t the solution. Any gadget solutions?

Re: Going digital: stands and holders?

Posted: Tue Apr 09, 2024 8:58 am
by WGWTR180
Geordie wrote: Sun Apr 07, 2024 12:56 pm Using low front big band stand with an iPad. I’d like to be able to adjust the height and, if possible, the angle, of the iPad on the low front stand. Propping it on my spectacle case isn’t the solution. Any gadget solutions?
Now that's interesting. I can't even read music off of those things!

Re: Going digital: stands and holders?

Posted: Tue Apr 09, 2024 11:18 am
by BrassSection
I’m set up with a standard music stand, iPad on one side and in-ear controller on other side. My only dilemma is visibility issues. Stand off center to the right great for trombone. Not so much trumpet or euph. Off to left good for trumpet and euph, trombone bell obscures iPad. Whole band plays standing, and I also have a mic front dead center for trumpet and trombone. Euph just needs to be played a little louder, acoustics good in the church so it is easily heard according to feedback from reliable sources. On rare occasions when French horn is out, is also can be heard. I’m not that far from a wall behind me.

As head of the church building committee 20+ years ago a high priority was put on acoustics. 20 piece brass group agreed building is a good place to play.

Re: Going digital: stands and holders?

Posted: Tue Apr 09, 2024 7:50 pm
by pmeiden
I use an iPad 12.9” (6th Gen I think), F/S and Lekato pedal. I usually use a Manhassat or Wenger stand provided by the venue, and if I’m blessed with a “sinker” stand I carry a large binder clip (for sheafs of documents) that I can clip around the stand shaft to hold it in position. My folding K&M stand also holds the iPad nicely when necessary.

Re: Going digital: stands and holders?

Posted: Wed Apr 10, 2024 8:49 am
by jthomas105
I use this for my 12.9 iPad Pro. Plenty of slide room with the adjustable gooseneck.

https://www.amazon.com/Elitehood-Goosen ... 02&sr=8-11

Re: Going digital: stands and holders?

Posted: Wed Apr 10, 2024 10:30 am
by dbwhitaker
jthomas105 wrote: Wed Apr 10, 2024 8:49 am I use this for my 12.9 iPad Pro. Plenty of slide room with the adjustable gooseneck.

https://www.amazon.com/Elitehood-Goosen ... 02&sr=8-11
I bought a similar stand: https://www.amazon.com/gp/product/B088FWC5BB?th=1

It works fine but I just use a regular stand all of the time now. It's much quicker and easier to move an iPad on and off a regular stand than it is to connect and disconnect the iPad from the specialized holder. Also, as previously mentioned by others, sometimes you need to play paper that is handed to you. I also don't like being different when everyone else in the big band has a regular stand. I think the specialized stand has advantages in some situations, but not all.

Re: Going digital: stands and holders?

Posted: Wed Apr 10, 2024 3:36 pm
by Geordie
In big band I have no option but to use a low front big band stand for presentational reasons. The height and angle cannot be adjusted. I need a gadget to put on the stand shelf that might provide at least a little adjustable display height and angle flexibility.

Re: Going digital: stands and holders?

Posted: Wed Apr 10, 2024 5:08 pm
by Posaunus
At our big band rehearsal last night, we were passed out 8 new paper charts to sight read.
The five players using iPads were S.O.L. - they had to switch to regular music stands.
They now have a week to scan / digitize the five "keeper" charts before our next rehearsal.

I wonder if iPad anxiety is a bit like range anxiety with an electric car. :idk: You're good until ...

Re: Going digital: stands and holders?

Posted: Wed Apr 10, 2024 5:16 pm
by bitbckt
I just use the Notes app to scan them directly into forScore and hand them back when that happens.

Re: Going digital: stands and holders?

Posted: Thu Apr 11, 2024 6:31 am
by sacfxdx
Take a regular stand for practice in case there’s new music. iPad will fit on it. Use the iPad stand for gigs. iPad is much easier to deal with than a large stack of paper.

Re: Going digital: stands and holders?

Posted: Thu Apr 11, 2024 12:36 pm
by BarryDaniels
I just put my iPad on a music stand. I was worried at first about it getting knocked off the stand but it hasn’t been an issue yet. To turn the pages in ForeScore I use a Flic button and a Flic Grip which is a 3D printed plastic holder sold on Etsy. The maker designs them for many different trombones and will even custom make one if he doesn’t have your specific horn.

Re: Going digital: stands and holders?

Posted: Fri Apr 12, 2024 12:08 am
by Aznguyy
https://www.amazon.com/gp/product/B0C6S ... =UTF8&th=1

I use this if I'm even stuck with the low big band stands. I can raise up my ipad or put it at a different angle depending on the situation.

There are also a lot of scanner apps you can use for passed out paper music. I use "Scanner Pro" and it just takes me a few minutes to take a picture of it and convert it to PDF for forscore. I can also upload from Scanner Pro to my google drive for backup.

Re: Going digital: stands and holders?

Posted: Fri Apr 12, 2024 12:45 am
by Geordie
Aznguyy wrote: Fri Apr 12, 2024 12:08 am https://www.amazon.com/gp/product/B0C6S ... =UTF8&th=1

I use this if I'm even stuck with the low big band stands. I can raise up my ipad or put it at a different angle depending on the situation.
Thank you. This looks like a good answer to my question. Will check it out.

Re: Going digital: stands and holders?

Posted: Fri Apr 12, 2024 9:12 am
by timothy42b
Geordie wrote: Fri Apr 12, 2024 12:45 am
Aznguyy wrote: Fri Apr 12, 2024 12:08 am https://www.amazon.com/gp/product/B0C6S ... =UTF8&th=1

I use this if I'm even stuck with the low big band stands. I can raise up my ipad or put it at a different angle depending on the situation.
Thank you. This looks like a good answer to my question. Will check it out.
That is a great solution and reasonably priced. My handbell ringers use something similar (photo below). Our folders are self supporting but we are all of an age where we need the music closer. Had I seen these I might not have gone to the trouble of building ones like this (although not as fancy)


Re: Going digital: stands and holders?

Posted: Fri Apr 12, 2024 7:07 pm
by Geordie
Thanks for the suggestions. This is far cheaper than what I’ve seen and might work
https://www.ikea.com/gb/en/p/havrehoj-h ... -40534576/?
Getting the Kabcon to England was was going to be expensive.

Re: Going digital: stands and holders?

Posted: Fri Apr 12, 2024 7:51 pm
by AtomicClock
Geordie wrote: Fri Apr 12, 2024 7:07 pm Getting the Kabcon to England was was going to be expensive.
I have one of these ALASHIs (for non-music purposes). It holds my 10-inch tablet fine, even in portrait and when I push on the top to simulate a taller tablet's balance.
https://www.amazon.co.uk/dp/B09ZY8T5PD

Re: Going digital: stands and holders?

Posted: Sat Apr 13, 2024 9:29 am
by rabiddolphin
BarryDaniels wrote: Thu Apr 11, 2024 12:36 pm I just put my iPad on a music stand. I was worried at first about it getting knocked off the stand but it hasn’t been an issue yet. To turn the pages in ForeScore I use a Flic button and a Flic Grip which is a 3D printed plastic holder sold on Etsy. The maker designs them for many different trombones and will even custom make one if he doesn’t have your specific horn.
How do you go back a page with the Flic button?

Re: Going digital: stands and holders?

Posted: Sat Apr 13, 2024 12:07 pm
by BarryDaniels
I have it setup to go back by clicking twice.