Fitting Neotech grip to a double trigger bass trombone?

Post Reply
User avatar
sirisobhakya
Posts: 10
Joined: Mon Jun 11, 2018 8:04 pm
Location: Bangkok, Thailand
Contact:

Fitting Neotech grip to a double trigger bass trombone?

Post by sirisobhakya » Tue Jun 12, 2018 2:39 am

I recently bought a secondhand bass trombone (YBL-612) from an auction site and donated it to my former school. I also bought a secondhand Neotech grip to fit with it, because the bass trombonist at this time is a grade-10 girl and she is not that muscular (her current horn is an unbelievably-badly-beaten Bach 50B), and the YBL-612 is heavier than I expected.

But when I tried installing it, it gets in the way of the finger paddle (the horn is modified from thumb roller to paddle).

Are there any way to fix this? Or should I just accept my defeat and install it to another horn? (Another student is complaining that his horn digs into his hand.)
GE90-115B-like air mass flow rate, punctured bicycle tire-like lung capacity.
User avatar
tctb
Posts: 9
Joined: Wed Apr 04, 2018 11:12 am

Re: Fitting Neotech grip to a double trigger bass trombone?

Post by tctb » Tue Jun 12, 2018 2:46 am

As the grip is plastic it can easily be remodeled to fit most trombones . I would suggest that you check to see if cutting away at a piece of the grip will allow it to work. They are cheap enough to take a risk.
If I had known trombones were this much fun , I would have got one sooner! :cool:
hyperbolica
Posts: 88
Joined: Fri Mar 23, 2018 7:31 am

Re: Fitting Neotech grip to a double trigger bass trombone?

Post by hyperbolica » Tue Jun 12, 2018 9:53 am

I have one of these grips, and tried to use it with a couple of bass bones. It pushes the hand far enough away from the braces that I was unable to reach the second lever properly with my medium sized hands. Your student may have a similar problem. The Sheridan has worked for me, with some modification, on singles and doubles, and has been very comfortable.
User avatar
Matt K
Posts: 508
Joined: Tue Mar 20, 2018 10:34 pm

Re: Fitting Neotech grip to a double trigger bass trombone?

Post by Matt K » Tue Jun 12, 2018 11:05 am

Have you played around with the configuration of the Neotech at all? If you unscrew it you can change both the angle and the depth of where it is located. (This is talking about the part that has the neoprene hand strap, not the base that clamps onto the slide).

Or are you talking about the plastic clamp getting in the way of the Gb paddle? If so, that's a relatively easy fix and just involves bending it away from the paddle. My tech did this with his bare hands a few years ago, but cautioned me to "not do that at home". That gives you the advantage of the aid and will probably put the paddle in a more ergonomic location anyway.
User avatar
Burgerbob
Posts: 60
Joined: Mon Apr 23, 2018 8:10 pm
Location: LA
Contact:

Re: Fitting Neotech grip to a double trigger bass trombone?

Post by Burgerbob » Tue Jun 12, 2018 11:20 am

The Gb paddle also may be on the wrong place, if it is so close to the lower cork barrel. It's not out of reason to just bend it to a new place.
Bass Trombone
DL Band
SLO Symphony
User avatar
sirisobhakya
Posts: 10
Joined: Mon Jun 11, 2018 8:04 pm
Location: Bangkok, Thailand
Contact:

Re: Fitting Neotech grip to a double trigger bass trombone?

Post by sirisobhakya » Tue Jun 12, 2018 4:04 pm

Thank you for the replies! The problem is the plastic part, but the finger paddle is indeed quite near the cork barrel. I may have a tech modify it when I have time. (It is comfortably usable, but with an altered hand position.)
GE90-115B-like air mass flow rate, punctured bicycle tire-like lung capacity.
Backbone
Posts: 5
Joined: Sun Apr 08, 2018 9:46 pm

Re: Fitting Neotech grip to a double trigger bass trombone?

Post by Backbone » Thu Jun 14, 2018 10:03 am

Check your bell to slide angle. If it is too close then it will hit. But also taking your horn to a tech for an adjustment of the finger paddle will help as well.
Carolus
Posts: 4
Joined: Mon Mar 26, 2018 3:26 am

Re: Fitting Neotech grip to a double trigger bass trombone?

Post by Carolus » Fri Jun 15, 2018 2:20 am

Reaching the second trigger is a real issue with the Neotech on a bass. I had the same issue Hyperbolica mentioned and I am adult with medium sized hands. The suggested Sheridan should work or a leather strap like the Yamaha one...
peteedwards
Posts: 9
Joined: Mon Apr 09, 2018 5:43 am
Location: York County PA

Re: Fitting Neotech grip to a double trigger bass trombone?

Post by peteedwards » Fri Jun 15, 2018 5:19 am

I use Neotech on both my basses & love it. The idea that you must contort your hand to reach the triggers is backwards. You should have the triggers adjusted to fit you, no matter what you use as a grip aid.
Backbone
Posts: 5
Joined: Sun Apr 08, 2018 9:46 pm

Re: Fitting Neotech grip to a double trigger bass trombone?

Post by Backbone » Fri Jun 15, 2018 9:01 am

peteedwards wrote:
Fri Jun 15, 2018 5:19 am
I use Neotech on both my basses & love it. The idea that you must contort your hand to reach the triggers is backwards. You should have the triggers adjusted to fit you, no matter what you use as a grip aid.
This is what my tech told me when I had issues with holding a King 7B. I told him that it sounded great but I hated how it felt in my hand. He told me that if I like the horn then I can have the paddles adjusted fit me.

-- I also use the Neotech grip on my Holton 181 and I agree... it is awesome! Very comfy.
Post Reply

Return to “Accessories”