Olds Mouthpieces

Post Reply
ranttila
Posts: 24
Joined: Sat May 26, 2018 5:54 am

Olds Mouthpieces

Post by ranttila »

I’ve seen some Olds mouthpieces on EBay and I was looking for a size chart, but I can’t seem to find any. Does anyone know how the Olds tenor trombone mouthpieces are sized as far as rim diameter and depth? If anyone has played on an Olds mouthpiece it would be nice to know how they compare to and how they perform compared to the Denis Wicks and Schilikes of modern day.

If you do know how they are sized I was looking at an Olds 8S and an Olds 3C if anyone knows those mouthpiece measurements specifically.

Thanks, Kenneth
Posaunus
Posts: 3424
Joined: Fri Mar 23, 2018 9:54 pm
Location: California

Re: Olds Mouthpieces

Post by Posaunus »

As far as I know, Olds mouthpieces were all made to fit the unusually small Olds trombone receivers, so will have a shank smaller than standard small-shank and perhaps a slightly different taper. That means that they will drop farther into the receiver of a non-Olds trombone, and might not work as well as a standard small-shank mouthpiece. The popular sizes for Olds were 3 (their "universal" small-bore piece) and 1 (for their [slightly] larger-bore instruments with F-attachments). The large-bore pieces I am familiar with are the Olds 15 and Olds 20 (for Olds trombones such as the O-15, O-23, and O-25) which are also optimized for the slightly smaller-than-standard Olds large-shank receivers.

I do have an Olds mouthpiece marked 12C, which seems much like a small-shank Bach 12C, except with an Olds shank. It plays just fine on a vintage small-bore (0.485"/0.500") Olds trombone - rather like an Olds 3. As far as the 8S and 3C pieces, I have no knowledge, but do believe that they are very rare beasts. Olds expert JohnL may know more about these, so should be invited to weigh in.

In general, I would see no reason (other than curiosity) to explore these Olds mouthpieces unless you have an Olds trombone - especially when there are literally dozens of mouthpieces which will better fit standard small-bore trombones, from (current and former) manufacturers such as Bach, Blessing, Conn, Courtois, Curry, Faxx, Giardinelli, Giddings, Hammond, King, Klier, Laskey, Lindberg/Conn, Marcinkiewicz, Schilke, Stork, Wick, Yamaha, Doug Elliott, ...
User avatar
JohnL
Posts: 1563
Joined: Fri Mar 23, 2018 9:01 am
Contact:

Re: Olds Mouthpieces

Post by JohnL »

Here are the only published specs that I can recall seeing:

http://rouses.net/trumpet/olds39/olds39_13.htm

EDIT:
Here is the info converted to text:
TROMBONE MOUTHPIECES
No. 1-Large bore, deep cup, for bass trombone. 1-inch cup diameter and .250-inch throat.
No. 2~-Wide cup dance model. Medium shallow cup 1-inch in diameter with .246-inch bore. Excellent high-register mouthpiece.
No. 3-This is a mouthpiece of average proportions, furnished regularly on Olds trombones. Has ,984-inch cup, medium shallow, with .237-in. bore.
No. 4--Semi cushion, high-register "recording" model with .968-inch cup, rather shallow, and .237-inch bore
No. 5-Wide flat rim, .938-inch diameter, medium shallow with .234-inch bore. Excellent soloist model.
No. 6-Cushion rim model; narrow, shallow cup ,938-inch diameter and .242-inch bore. Extreme high-register model.
As far as small shank, Olds also produced a 1★, a 3C, and a 12C.
In large shank, there are:
15 - about 6.5AL size
20 - about 5G size
G - George Roberts model; about 1.5G size
21 - pretty sure this is the G rebadged after Olds and GR parted ways.

You might see a 10 or an 18 being sold as small shank trombone mouthpieces. The 10 is a baritone horn mouthpiece and the 18 is a baritone bugle mouthpiece.

There was a whole different sizing system up until around 1938 or so.
Trombone
No. 7 - For high register and solo playing.
No. 8 - Standard medium, as furnished with Olds instruments.
No. 9 - Special "lonq range" design, for featured players.
No. 10 - Medium bore with special muscle fitting rim for rapid technique.
No. 11- Large bore, for big tone and heavy volume.
From that era, I've also seen mouthpieces marked 8S, SYM, and N.V. (I suspect the last is someone's initials).

Notice that both systems have a size 10, but it's pretty easy to see which is which when looking at the mouthpiece.
sporto
Posts: 64
Joined: Mon Jul 09, 2018 9:47 am
Location: San Diego, CA

Re: Olds Mouthpieces

Post by sporto »

I recently bagged a 1940 Olds and there was an 8S in the case. Inside diameter is the same as a Bach 12C. The inside contour is V shaped.
User avatar
JohnL
Posts: 1563
Joined: Fri Mar 23, 2018 9:01 am
Contact:

Re: Olds Mouthpieces

Post by JohnL »

The earliest Olds mouthpieces I've seen are funnel shaped, with a wide, flat rim. They're marked on the underside of the rim; no size. In the late 1920's, they also made a mouthpiece with an ivory cup insert; it's rare to find one with an intact insert.
sporto
Posts: 64
Joined: Mon Jul 09, 2018 9:47 am
Location: San Diego, CA

Re: Olds Mouthpieces

Post by sporto »

JohnL wrote: Sun Jul 15, 2018 8:26 pm The earliest Olds mouthpieces I've seen are funnel shaped, with a wide, flat rim. They're marked on the underside of the rim; no size. In the late 1920's, they also made a mouthpiece with an ivory cup insert; it's rare to find one with an intact insert.
This 8S is marked OLDS LOS ANGELES on the underside of the rim. Rim is wide and flattish, like an Olds 3.
User avatar
FEWeathers
Posts: 94
Joined: Fri Jan 04, 2019 10:36 am

Re: Olds Mouthpieces

Post by FEWeathers »

At the risk of resurrecting a dead (?) thread, have any of the Olds aficionados ever found certain vintage Olds horns that actually seem like they fit Morse taper mouthpieces better than the standard Olds shank pieces?

I ask because I recently acquired a '46 "The Olds" Standard, which came with an unidentifiable (unmarked, small cup, Morse shank) mouthpiece, which I set aside (assuming it would work better with an Olds 3). Much to my surprise, when I put the Olds 3 in the receiver, the mouthpiece wobbled, etc. It acted like how a vintage Conn does when putting a Morse taper mouthpiece in a Remington shank era horn.

I put a Morse shank Bach 12C in her, and she was happy with that shank, locking at .94" penetration. Happily, I have a Doug Elliot MT100 mouthpiece with a C+ cup, w/ a D2 Olds shank, as well as a D2 Morse shank. Yes, you guessed it, the Olds shank wobbled, while the Morse shank locked in with a 1.00" penetration. The Olds shank went to 1.05", while wobbling, btw.

So my question is, was the "The Olds" Standard a different animal than the other Olds horns being made? Is it the "missing link" between old style Olds horns (that went away), and the newer style ones?

I know that it was called the "Self-Balancing" model when it first came out, but I'm surprised about her lack of interest in gripping the normal Olds mouthpieces. Is this a unicorn? A one-off? Or did a previous owner change the leadpipe? I didn't bother playing her with the Olds 3, as she worked quite well with the Elliot.
User avatar
BGuttman
Posts: 5893
Joined: Thu Mar 22, 2018 7:19 am
Location: Cow Hampshire

Re: Olds Mouthpieces

Post by BGuttman »

I have a 1925 Olds (TIS) and it fits standard small shank mouthpieces. I think it was a common repair job to ream the receivers.
Bruce Guttman
Merrimack Valley Philharmonic Orchestra
"Almost Professional"
User avatar
Doug Elliott
Posts: 2950
Joined: Wed Mar 21, 2018 10:12 pm
Location: Maryand

Re: Olds Mouthpieces

Post by Doug Elliott »

First of all, most receivers and leadpipes are somewhat inconsistent just based on the manufacturing process.

My Olds shank is still a "Morse taper" .050 per inch, it's just a little smaller and goes in farther - so the fact that it wobbles means that the receiver's taper doesn't go past the 1" depth. It must be smaller past that point. That's not a problem and I would not ream it. My Recording from the mid 50's is the same way.
"I know a thing or two because I've seen a thing or two."
User avatar
FEWeathers
Posts: 94
Joined: Fri Jan 04, 2019 10:36 am

Re: Olds Mouthpieces

Post by FEWeathers »

Good info on your taper, and it figures that there is some variances in the manufacturing process. Especially given the smaller numbers of horns built when Olds was in LA vs. Fullerton. I have an Olds Super with a 7 3/8" bell, for example, when the catalogs only offered bells in .50" increments. So it goes.

For the record, the Olds 3 also went in to a depth of 1.05", so your version is dead-on.
joebradford46
Posts: 3
Joined: Mon Feb 14, 2022 6:24 am
Location: UK

Re: Olds Mouthpieces

Post by joebradford46 »

Just picked up a beauty of on Olds Opera and all this info very helpful, especially the sizing chart. On the hunt for a #20 or #15.
The fella I bought it off had a mighty collection of olds horns and mouthpieces. Including an absolute beauty of a George Roberts model Bass, plays like a dream!

What are the corresponding DE pieces that fit the Olds Opera shank?
Macbone1
Posts: 339
Joined: Tue Oct 01, 2019 1:17 pm
Location: Massachusetts

Re: Olds Mouthpieces

Post by Macbone1 »

Doug's LT pieces fit, using his "O" shank. There may be others.
King Jiggs 2BL
Olds Opera
Besson Sovereign Bb/F bass
Holton bass trumpet
B&H Imperial shepherd's crook cornet
Posaunus
Posts: 3424
Joined: Fri Mar 23, 2018 9:54 pm
Location: California

Re: Olds Mouthpieces

Post by Posaunus »

joebradford46 wrote: Mon Feb 14, 2022 6:42 am What are the corresponding DE pieces that fit the Olds Opera shank?
I suggest contacting Doug Elliott directly. No one knows his products as well as he does. Though he's currently quite busy catching up on mouthpiece manufacturing, he'll eventually give you the right answers to your questions. Original Olds mouthpieces fit their trombone receivers just fine, but are not the sizes most of us want these days.

I'm waiting for an Olds D3* shank from Doug for my [small-shank] 1968 Olds R15 Recording. I use an Olds 20 mouthpiece for my Olds Opera, but have found a few Yamaha large-shank mouthpieces that also work pretty well. The Olds G (George Roberts model) can also be used if you want to pretend your Opera is a bass trombone!
User avatar
greenbean
Posts: 1784
Joined: Fri Mar 23, 2018 6:14 pm
Location: San Francisco

Re: Olds Mouthpieces

Post by greenbean »

I have an Olds 20 in excellent condition I would part with if you are still looking.

Also, a belated (by 4 years) Thank You to JohnL for the super useful post up above! Very helpful - as usual.
Tom in San Francisco
Currently playing...
Bach Corp 16M
Many French horns
pfcastor
Posts: 57
Joined: Tue Feb 26, 2019 11:05 am
Location: Safety Harbor, FL

Re: Olds Mouthpieces

Post by pfcastor »

Greenbean ... sent PM on the Olds 20
pfcastor
Posts: 57
Joined: Tue Feb 26, 2019 11:05 am
Location: Safety Harbor, FL

Re: Olds Mouthpieces

Post by pfcastor »

greenbean wrote: Sat Feb 19, 2022 10:25 pm I have an Olds 20 in excellent condition I would part with if you are still looking.

Also, a belated (by 4 years) Thank You to JohnL for the super useful post up above! Very helpful - as usual.
Is the Olds 20 still available for sale? If so I am insteretest in purchasing it.
Post Reply

Return to “Mouthpieces”